含氰基聚酰亚胺薄膜的制备及其热分解动力学

以4-[3,5-双(4-氨基苯氧基)苯氧基]邻苯二甲腈和3,3′,4,4′-联苯四甲酸二酐为原料,经聚酰胺酸热酰亚胺化制备含氰基的聚酰亚胺(CN-BP-PI)薄膜。采用傅里叶变换红外光谱、热重分析、差示扫描量热法对CN-BP-PI薄膜进行了分析。采用动态热重法研究了CN-BP-PI的分解动力学,用积分法结合常见固相热分解反应动力学函数来判断热分解的动力学函数。由Ozawa,KAS,Kissinger,Achar,Coats-Redfern,MacCallum-Tanner,van Krevelen方程求热分解反应的动力学参数。转化率为0.2~0.8时所得CN-BP-PI在氮气中热分解反应的表观活化能为119.68~215.61 kJ/mol,平均活化能为136.35 kJ/mol,指前因子平均值为8.52×107 s-1。     

三相内循环流化床式光催化反应器降解酸性红A

对三相内循环流化床式光催化反应器进行优化改造。应用改造后反应器及UV/TiO2技术进行酸性红A废水降解的动力学考察,结果显示:在空气流率为0.8 m3/h,二氧化钛投加量为1 g/L条件下,废水经75 min反应,脱色率接近100%;经400 min反应,总有机碳去除率达到87%。借助液相色谱-质谱的检测,推断出酸性红A可能有的降解路径。     

Fluidity improvement of semiaromatic polyamides: Modification with oligomers

Poly(decamethylene terephthalamide) PA10T with different relative viscosities (RV) were successfully produced by the reaction of 1,10‐decanediamine and terephthalic acid through molecular weight regulator benzoic acid (BA). RV was shown to be decreased linearly with increasing BA concentrations and detailed structures of PA10Ts were characterized by ¹³C‐NMR. Fluidity of PA10T with varying molecular weight was tested and low RV PA10Ts were used as modifiers to improve fluidity behaviors of high RV PA10Ts, meanwhile mechanical properties were maintained. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40058.     

Preparation of antimicrobial polycarboxybetaine‐based hydrogels for studies of drug loading and release

A series of cationic poly(N‐isopropyl acrylamide) (PNIPAM)‐g‐poly(carboxybetaine ester) (PCBMAE) hydrogels were prepared by reversible addition–fragmentation chain‐transfer polymerization with PCBMAE precursors reacting with N‐isopropyl acrylamide in the presence of N,N′‐methylene bisacrylamide. These hydrogels exhibited excellent antimicrobial activities against Staphylococcus aureus and could switch to nontoxic zwitterionic hydrogels after hydrolysis. Nonionic tetracycline hydrochloride (TCHC) and anionic sodium salicylate (SA) were selected to evaluate the loading capacities and release kinetics of the cationic hydrogels. We found that the loading efficiencies of TCHC in the PNIPAM‐g‐PCBMAE hydrogels were approximately twice as high as those of SA. However, the cumulative release amount of TCHC was lower than that of SA from the corresponding cationic hydrogel at 37°C. In addition, the PNIPAM‐g‐PCBMAE hydrogels exhibited accelerated release rates of both TCHC and SA with increasing content of (2‐carboxymethyl)?3‐acryloxyethyldimethylammonium chloride methyl ester. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39839.     

Nonisothermal crystallization behaviors of biodegradable double crystalline poly(butylene succinate)‐poly(ethylene glycol) multiblock copolymers

Nonisothermal crystallization behaviors of both poly(butylene succinate) (PBS) and poly(ethylene glycol) (PEG) segments within PBS‐PEG (PBSEG) multiblock copolymers were investigated by differential scanning calorimetry (DSC). The nonisothermal crystallization kinetics of both PBS and PEG segments were analyzed by Avrami, Ozawa, and Mo methods. The results showed that both of Avrami and Mo methods were successful to describe the nonisothermal crystallization kinetics of PBS and PEG segments. The results of crystallization kinetics indicated that the crystallization rate of PBS segment decreased with PBS segment content and/or L_PBS, while that of PEG segment decreased with M_n,PEG or F_PEG. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40940.     

Synthesis and characterization of polyhydroxylated polybutadiene binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) with isophorone diisocyanate

A macromolecular hindered phenol antioxidant, polyhydroxylated polybutadiene containing thioether binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (PHPBT‐b‐TPH), was synthesized via a two‐step nucleophilic addition reaction using isophorone diisocyanate (IPDI) as linkage. First, the ? OH groups of PHPBT reacted with secondary ? NCO groups of IPDI to form the adduct PHPBT‐NCO, then the PHPBT‐b‐TPH was obtained by one phenolic ? OH of 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (TPH) reacting with the PHPBT‐NCO. The PHPBT‐b‐TPH was characterized by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, and thermogravimetric analysis, and its antioxidant activity in natural rubber was studied by an accelerated aging test. Influences of reaction conditions on the two nucleophilic reactions between ? OH group and ? NCO group were investigated. In addition, catalytic mechanism for the reaction between PHPBT‐NCO and TPH was discussed. The results showed that the adduct PHPBT‐NCO could be obtained by using dibutyltin dilaurate (DBTDL) as catalyst, and the suitable temperature and DBTDL amount were 35°C and 3 wt %, respectively. However, triethylamine (TEA) was more efficient than DBTDL to catalyze the reaction between PHPBT‐NCO and TPH because of steric hindrance effect. In addition, it was found that the thermal stability and antioxidant activity of PHPBT‐b‐TPH were higher than those of the low molecular weight antioxidant TPH. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40942.     

Synthesis and drug‐release studies of low‐fouling zwitterionic hydrogels with enhanced mechanical strength

Reversible addition–fragmentation chain‐transfer polymerization was introduced to prepare a series of zwitterionic poly(hydroxyethyl methacrylate)‐g‐poly(sulfobetaine methacrylate) (PSBMA) hydrogels (HSGs) with different monomer feed ratios. Compared with PSBMA hydrogels, these hydrogels exhibited enhanced mechanical strengths. Then, the HSGs were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and swelling measurements. We found that the equilibrium swelling ratios, mechanical strengths, and drug‐release behaviors were significantly affected by the feed ratios of the gels. The hydrophilic tetracycline hydrochloride release results suggest that the hydrophilic drug release from the HSGs could be prolonged by the variation of the hydroxyethyl methacrylate amount in the gel networks. The bovine serum albumin adsorption data showed that the zwitterionic HSG with 18.2 wt % sulfobetaine methacrylate exhibited good protein‐resistance properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41041.     

Phase equilibria and structural properties of thiophene/[Bmim][BF4]: A molecular insight from monte carlo simulations

The phase equilibria of thiophene in 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) is calculated by Monte Carlo simulation in Gibbs ensemble using a united atom force field. The liquid density of studied ionic liquid and the vapor pressure of thiophene in [Bmim][BF₄] were compared with corresponding experimental data reported in the literature, and a good agreement was obtained. In order to describe the solubility of thiophene in this ionic liquid, we have calculated the radial distribution functions and spatial distribution functions of thiophene/IL mixtures to study the interaction of thiophene with cations and anions of [Bmim][BF₄] in the liquid phase. The local composition concept in fluid was also examined to give further insight into the liquid structure. The results show that thiophene is well organized around the terminal carbon atom of the butyl or methyl chain attached to the imidazolium ring of cations and tends to adopt a symmetrically distribution on the anions. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3916–3924, 2014     

Gradient and weather resistant hybrid super‐hydrophobic coating based on fluorinated epoxy resin

A weather resistant super‐hydrophobic coating that can offer good substrate adhesion and yet to be easily processed at large scale can be of practical use in emerging fields of self‐cleaning and anti‐icing paint, combing all these properties together remains challenging task. Here we describe a composite coating composed of a fluorinated epoxy resin emulsion with embedded in situ surface‐modified dual‐scale nano‐silica, which displayed durable super‐hydrophobicity and excellent adhesive strength. The as‐prepared coating possesses water contact angle of 158.6 ± 1°, sliding angle around 3.8 ± 0.2° which remain stable even under acidic/alkaline, heat/cool, and accelerated aging treatment. The results demonstrate that surface roughness had a micron‐ and nanometer scale distribution with increased particle loading beyond 40 wt %. Through quantitative comparison of surface Attenuated Total Reflection (ATR) with bulk FT‐IR transmission spectra, a gradient coating with surface enrichment of hydrophobic groups was determined. The air‐side fluorinated polysiloxane‐rich layer endows coating with weather‐resistance and ultra‐hydrophobicity while bottom epoxy resin layer enhances substrate adhesion. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40955.     

Selective hydrogenation of furfural to cyclopentanone over Cu-Ni-Al hydrotalcite-based catalysts

A series of Cu-Ni-Al hydrotalcites derived oxides with a (Cu+Ni)/Al mole ratio of 3 with varied Cu/Ni mole ratio (from 0.017 to 0.5, with a Cu ratio of 0.0125 to 0.25) were prepared by co-precipitation method, then applied to the hydrogenation of furfural in aqueous. Their catalytic performance for liquid phase hydrogenation of furfural to prepare cyclopentanone was described in detail, considering reaction temperature, catalyst composition, reaction time and so on. The yield of cyclopentanone was influenced by the mole ratio of Cu-Ni-Al based heterogeneous catalyst and depended on the reaction conditions. The yield of cyclopentanone was up to 95.8% when the reaction was carried out under 413 K with H₂ pressure of 40 bar for 8 h. The catalysts were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM) and H₂ temperature-programmed reduction (H₂-TPR).