应用纵向分区彩虹全息术合成断层图像的三维消色像

报道了应用纵向分割多狭缝曝光彩虹全息术合成多幅断层图像为三维消色像的方法及其实验结果。通过将主全息图记录狭缝按纵向分割并结合使用循环分割和色散补偿光栅 ,实现了在较高的分辨率和较低色模糊的多幅断层像的白光三维消色像的合成 ,并提高了再现像的视觉亮度、视场和立体感。     

Phototunable Underwater Oil Adhesion of Micro/Nanoscale Hierarchical‐Structured ZnO Mesh Films with Switchable Contact Mode

Controllable surface adhesion of solid substrates has aroused great interest both in air and underwater in solving many challenging interfacial science problems such as robust antifouling, oil‐repellent, and highly efficient oil/water separation materials. Recently, responsive surface adhesion, especially switchable adhesion, under external stimulus in air has been paid more and more attention in fundamental research and industrial applications. However, phototunable underwater oil adhesion is still a challenge. Here, an approach to realize phototunable underwater oil adhesion on aligned ZnO nanorod array‐coated films is reported, via a special switchable contact mode between an unstable liquid/gas/solid tri‐phase contact mode and stable liquid/liquid/solid tri‐phase contact mode. The photo‐induced wettability transition to water and air exists (or does not) in the micro/nanoscale hierarchical structure of the mesh films, playing important role in controlling the underwater oil adhesion behavior. This work is promising in the design of novel interfacial materials and functional devices for practical applications such as photo‐induced underwater oil manipulation and release, with loss‐free oil droplet transportation.     

基于GaAs STATZ模型的RF MOSFET DC建模技术

STATZ模型是表征GaAsMESFET特性的常用模型,具有表达式简洁、参数少的优点。通过尝试将STATZ模型用于表征射频MOSFET的直流特性,提取并在ADS软件中优化了STATZ直流模型的参数。为了提高仿真精度,模型必须考虑晶体管漏极与源极的寄生电阻,根据MOSFET处于强反型区且漏-源电压为零时的等效电路模型提取了晶体管的漏极和源极的寄生电阻。在ADS软件中利用STATZ模型对MOSFET的直流特性进行了仿真,测量的MOSFET直流曲线与仿真曲线一致性很好,验证了模型的良好的精确度,证明了GaAs STATZ模型可以用于表征射频MOSFET的直流特性。晶体管采用中芯国际的0.13μm RF CMOS工艺制作。     

Ultrathin Flexible Graphene Film: An Excellent Thermal Conducting Material with Efficient EMI Shielding

As the portable device hardware has been increasing at a noticeable rate, ultrathin thermal conducting materials (TCMs) with the combination of high thermal conductivity and excellent electromagnetic interface (EMI) shielding performance, which are used to efficiently dissipate heat and minimize EMI problems generated from electronic components (such as high speed processors), are urgently needed. In this work, graphene oxide (GO) films are fabricated by direct evaporation of GO suspension under mild heating, and ultrathin graphite‐like graphene films are produced by graphitizing GO films. Further investigation demonstrates that the resulting graphene film with only ≈8.4 μm in thickness not only possesses excellent EMI shielding effectiveness of ≈20 dB and high in‐plane thermal conductivity of ≈1100 W m^‐1 K^‐1, but also shows excellent mechanical flexibility and structure integrity during bending, indicating that the graphitization of GO film could be considered as a new alternative way to produce excellent TCMs with efficient EMI shielding.     

以质为根,夯实企业生存和发展的基石

该文以直接论述的方式,指出国家对质量工作的重视,就当前元器件和整机企业中存在的质量问题进行深入剖析,从宏观和微观层面对企业生存和发展的关键提出切实可行的建议和对策。     

Alternate energy harvesting and information relaying in cooperative AF networks

This paper studies an energy harvesting (EH) based cooperative relaying system, where two half-duplex relays operate with EH and alternately amplify and forward source data to the destination. When one relay joins in the cooperative data transmission, the other relay will harvest wireless energy by overhearing the transmissions from both the source and the transmitting relay. Both the time-switching and power-splitting architectures are considered for the EH and data reception at relays. Since the EH can be implicitly performed by each relay through listening the ongoing transmissions, more energy can be harvested for the cooperative data transmission. The outage probability and throughput of the proposed scheme are derived. Simulation results are provided to verify the correctness of our theoretical analysis and show that our scheme can significantly outperform the single-relay system in terms of throughput.     

Geochemical characteristics of the Permian marine mudstone and constraints on its provenance and paleoenvironment in the Fenghai area, Fujian Province, southeastern China

Permian marine strata have gradually become a research focus in the world. The marine strata of the Late Permian Dalong Formation (P₃d) in the Fenghai area, Fujian Province, have become more and more important as their geochemical characteristics record important geological information and are a good indicator for recovering and reconstructing the paleosedimentary environments and tectonic attributes. The major elements, trace elements and rare earth elements were analyzed by XRF and ICP-MS, respectively. Based on the results of detailed field geological surveys, profile measurements as well as typical sample collection, the tectonic setting and provenance of Permian marine mudstone were comprehensively discussed. The results showed that the Dalong Formation (P₃d) was deposited in an active continental margin tectonic environment as revealed by the relation between Fe₂O₃ + MgO and TiO₂ and Al₂O₃/SiO₂. The fingerprint characteristics of Mn, Fe, Co, Ni and REE and the ratio of U/Th, V/Cr, Sr/Ba, (La/Yb)_N and V/(V + Ni) indicated that the sedimentary provenance was mainly derived from potassium feldspar, followed by muscovite. Sedimentary water bodies showed a gradually decreasing depositional rate trend, water depth gradually shallowing and paleo-salinity and productivity gradually increasing. Moreover, since transient delamination occurred during sedimentary processes, sedimentary water bodies showed obvious neritic characteristics. It was consistent with the results revealed by lithological and geochemical characteristics. Calcareous mudstone and siltstone transitioned into fine sandstone from bottom to top, indicating paleo-water bodies became shallow. The research results provided good reference and guidance for understanding Permian paleo-sedimentary environments and tectonic attributes of the Yong’an area, Fujian Province, southeastern China.     

数字微镜器件及其应用

数字微镜器件是一种新型的全数字化的平板显示器件，以其为主要组件的大屏幕投影显示技术获得了良好的市场反映。本文将具体介绍数字微镜器件的工作原理、像素结构、制作工艺及图像显示原理等。     

用厚透镜实现分数阶付里叶变换

本文给出了厚透镜实现分数阶付里变换的光学结构；定量分析了阊最透镜和双厚秀镜结构中分数付里叶变换和透镜参数之间的关系。计算表明用厚透镜可以实现分类阶付时变换。     

基于Internet/MIME的EDI技术研究

本文首先介绍了基于Ｉｎｔｅｒｎｅｔ的ＥＤＩ应用背景，在分析Ｉｎｔｅｒｎｅｔ／ＭＩＭ电子邮件标准的基础上，讨论了有关ＥＤＩ单证封装技术，随后，介绍了基于Ｉｎｔｅｒｎｅｔ／ＭＩＭＥ的ＥＤＩ单证安全传输技术，并展望了基于Ｉｎｔｅｒｎｅｔ／ＭＩＭＥ的ＥＤＩ应用前景。