Quantitative Physiological Assessment of Stress Via Altered Immune Functioning Following Interaction With Differing Automotive Interface Technologies

Technology can enhance or diminish a user's psycho-physiological stress level; the ability to quantify these responses can help evaluate and refine design. The capability of drivers to accomplish basic tasks utilizing differing sensory modalities while maintaining lane discipline within a computer-simulated environment was assessed. Fifteen healthy subjects provided capillary blood samples before and after using three human–machine interface designs—touch-screen, voice control, and multimodal. Using a chemiluminescent technique termed Leukocyte Coping Capacity, the ability of leukocytes to produce reactive oxygen species in vitro was assessed. Significant poststressor changes in leukocyte activity of varying magnitude were observed following the use of all interfaces; with the multimodal interface provoking the most pronounced response and voice control the least. Although still requiring further research, the results support the proposition for using immune responsiveness as a means for quantifying psychological stress during assessment of ergonomic design and psycho-physiological and social interaction.     

基于51单片机的节能型光伏追日系统的设计

目前存在的光伏追日系统在控制方式上都存在同样的问题:追日步进电机时刻运行,从未停歇,存在浪费用电和机械疲劳运行等问题。文章主要介绍以51单片机为控制核心,结合光控与时控的优点,并在此基础上提出适时进入节能的睡眠模式,最大程度地减少追日系统能耗的控制方法。实测结果表明,该算法具有减少系统耗电、减少机械传动系统损伤等优点。     

Advances in the control of mechatronic suspension systems

The suspension system is a key element in motor vehicles. Advancements in electronics and micropro- cessor technology have led to the realization of mechatronic suspensions. Since its introduction in some production motorcars in the 1980s, it has remained an area which sees active research and development, and this will likely continue for many years to come. With the aim of identifying current trends and future focus areas, this paper presents a review on the state-of-the-art of mechatronic suspensions. First, some commonly used classifications of mechatronic suspensions are presented. This is followed by a discussion on some of the actuating mechanisms used to provide control action. A survey is then reported on the many types of control approaches, including look-ahead preview, predictive, fuzzy logic, proportional-integral-derivative （PID）, optimal, robust, adaptive, robust adaptive, and switching control. In conclusion, hydraulic actuators are most commonly used, but they impose high power requirements, limiting practical realizations of active suspensions. Electromagnetic actuators are seen to hold the promise of lower power requirements, and rigorous research and development should be conducted to make them commercially usable. Current focus on control methods that are robust to suspension parameter variations also seems to produce limited performance improvements, and future control approaches should be adaptive to the changeable driving conditions.     

Medium-entropy (Ti,Zr, Hf)2SC MAX phase

Medium- and high-entropy alloys or ceramics for tuning the physicochemical properties of materials by the combination of multiple principal elements have received much interest. Herein, a medium-entropy (Ti, Zr, Hf)₂SC phase was synthesized attributing to the structural and chemical diversity of MAX phases. The crystal structure of (Ti, Zr, Hf)₂SC was determined by the Rietveld refinement of XRD, SEM, and atom-resolved TEM along with EDS elemental analysis. Phase evolution of X-ray diffraction patterns and TG/DSC curves were employed to reveal the synthesis mechanism of (Ti, Zr, Hf)₂SC from 2TiC–Zr–ZrC-2HfH₂-3.2FeS reactant system. The Vicker's hardness and the electrical resistivity of (Ti, Zr, Hf)₂SC were found higher than those of Ti₂SC, but the thermal conductivity of (Ti, Zr, Hf)₂SC was lower.     

Core–shell structured Cu@Pt nanoparticles as effective electrocatalyst for ethanol oxidation in alkaline medium

Core–shell nanoparticles of Cu@Pt/C electrocatalysts were synthesized using various Pt:Cu atomic ratios with NaBH₄ as a reducing agent. The crystal structure and surface morphology were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The incorporation of copper in Cu@Pt/C electrocatalysts was found to shift all Pt diffraction planes in the negative direction with expanding the crystal lattice dimensions. The electrocatalytic activity of various Cu@Pt/C electrocatalysts was investigated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Cu@Pt/C electrocatalysts containing Pt:Cu atomic ratios of 1:0.5 and 1:2 showed an enhanced electrochemical performance for ethanol oxidation when related to Pt/C.     

Sketch-based data plane hardware model for software-defined measurement

A sketch-based data plane hardware model for software-defined measurement was introduced,and it was implemented in the programmable network device NetMagic.A generic sketch model for collecting flow-level data using high-speed memories on the FPGA was proposed,the control plane collected and cached the data for further process.Count-min sketch and 2-universal hash functions in the SRAM of FPGA for real-time traffic counting of high-speed traffic were implemented; Bloom filter was used to rebuild the original 5-tuple data which solved the irreversibility of sketch.The CERNET backbone trace to evaluate the prototype system was used,the result shows that it has the ability to use the limited hardware resource to measure a large amount of network traffic data with a proper measurement accuracy at the same time.     

Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid

In this research work, Zinc(II) and Aluminum(III)-IIP's were synthesized by optimizing the amount of methacrylic acid as monomer, divinylbenzene as cross-linker. The IIP's were functionalized with 8-hydroxy quinolone complexes of the two metal ions under thermal conditions by copolymerization with monomer and cross-linker. The IIP's and Non-IIP's were characterized using FT-IR, TGA, and SEM analysis. A quite remarkable difference in the size was observed of the polymers (Zn(II) 1.0 µm and Al(III) 0.1 µm). A stronger affinity was observed with IIP in comparison with Non-IIP at pH 3.1 and 4.5 for Zn(II) and Al(III) ions on their respective polymers.     

Polylactide‐perylene derivative for blue biodegradable organic light‐emitting diodes

In this work we demonstrate, for the first time, the use of polylactic acid (PLA) as a biodegradable host matrix for the construction of the active emissive layer of organic light‐emitting diode (OLED) devices for potential use in bioelectronics. In this preliminary study, we report a robust synthesis of two fluorescent PLA derivatives, pyrene‐PLA ( AH10 ) and perylene‐PLA ( AH11 ). These materials were prepared by the ring opening polymerisation of l ‐lactide with hydroxyalkyl‐pyrene and hydroxyalkyl‐perylene derivatives using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as catalyst. OLEDs were fabricated from these materials using a simple device architecture involving a solution‐processed single‐emitting layer in the configuration ITO/PEDOT:PSS/PVK:OXD‐7 (35%): AH10 or AH11 (20%)/TPBi/LiF/Al (ITO, indium tin oxide; PEDOT:PSS, poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid); PVK, poly(vinylcarbazole); OXD‐7, (1,3‐phenylene)‐bis‐[5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole]; TPBi, 2,2′,2″‐(1,3,5‐benzenetriyl)tris(1‐phenyl‐1H‐benzimidazole)). The turn‐on voltage for the perylene OLED at 10 cd m^–2 was around 6 V with a maximum brightness of 1200 cd m^–2 at 13 V. The corresponding external quantum efficiency and device current efficiency were 1.5% and 2.8 cd A^–1 respectively. In summary, this study provides proof of principle that OLEDs can be constructed from PLA, a readily available and renewable bio‐source. © 2020 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.