Comparative studies on the nutritive and anti-nutritive properties of fruits in selected Berberis species of West Himalaya, India

Nutritional and anti-nutritional factors of five Berberis species, widely known for their wild edible fruits and medicinal properties, were investigated in the Indian west Himalaya. These fruits contained high content of fiber (pulp 7.0-8.1%; seeds 4.4-5.3%), protein (pulp 4.7-7.2%; seeds 5.9-8.5%) and fat (pulp 2.6-4.0%; seeds 4.6-5.3%) as compared to most of the known wild edibles in the region. They, however, contained reasonably lower food energy, largely due to low carbohydrate content. All the five species emerged as good source of minerals, especially Ca and K. The values of various nutrient and mineral elements varied significantly among species, which implies potential of different species can be harnessed for diverse attributes. The fruits, however, possessed anti-nutritional factors like tannins and phytic acid, which need to be tackled appropriately while considering these fruits for value addition as health food.     

Multiplex PCR-based strategy to detect contamination with mycotoxigenic Fusarium species in rice and fingermillet collected from southern India

BACKGROUND: The genus Fusarium comprises a diverse group of fungi including several species that produce mycotoxins in food commodities. In the present study, a multiplex PCR was standardised for the group‐specific detection of fumonisin‐producing and trichothecene‐producing strains of Fusarium species. Primers for genus‐level recognition of Fusarium spp. were designed from the internal transcribed spacer regions 1 and 2 of rDNA. Primers for group‐specific detection were designed from the tri5 and tri6 genes involved in trichothecene biosynthesis and the fum1 and fum13 genes involved in fumonisin biosynthesis. RESULTS: Among the various genera and their strains tested, all the 85 confirmed Fusarium strains were positive for rDNA gene and the rest stayed negative. From among the Fusarium strains, 15 had amplification for trichothecene‐ and 20 for fumonisin‐encoding genes. All PCR positive trichothecene chemotypes of Fusarium species tested were positive for chemical analysis but in the case of fumonisins, of the 20 PCR positive cultures, only 13 showed positive for chemical analysis by HPTLC. CONCLUSION: The assay described here provided a rapid and reliable detection of trichothecene‐ and fumonisin‐producing Fusarium directly from natural food grains and the results were always comparable with a conventional HPTLC detection method. It can, therefore, be used by the food industry to monitor quality and safety. Copyright © 2011 Society of Chemical Industry     

RF channelizer architectures using 3-way iterative down conversion for concurrent or fast-switching spectrum analysis

A wide-band RF channelizer architecture using the concept of 3-way iterative down-conversion is introduced. An example RF channelizer implementation splits the input spectrum of 0.6–9 GHz into 7 channels each with a 1.2 GHz bandwidth. This RF channelizer implementation has the ability of concurrently down-converting 3 channels enabling multi-Gbps aggregate data reception. It further demonstrates the ability to rapidly switch from receiving one channel to another which is crucial for rapid spectrum analysis. A prototype of the RF channelizer has been fabricated in a 65 nm standard CMOS process. A 400 Mbps (BPSK) data reception has been demonstrated by down-converting two channels concurrently. Channel switching can be as fast as 8 ns and is always faster than \(1\,\upmu s\). The chip occupies an area of 2 mm \(\times\) 1 mm and consumes an average power of 435 mW while offering a dynamic range between 58 and 63 dB.     

Mass transfer kinetics during osmotic dehydration of pomegranate arils

The mass transfer kinetics during osmotic dehydration of pomegranate arils in osmotic solution of sucrose was studied to increase palatability and shelf life of arils. The freezing of the whole pomegranate at -18 °C was carried out prior to osmotic dehydration to increase the permeability of the outer cellular layer of the arils. The osmotic solution concentrations used were 40, 50, 60°Bx, osmotic solution temperatures were 35, 45, 55 °C. The fruit to solution ratio was kept 1:4 (w/w) during all the experiments and the process duration varied from 0 to 240 min. Azuara model and Peleg model were the best fitted as compared to other models for water loss and solute gain of pomegranate arils, respectively. Generalized Exponential Model had an excellent fit for water loss ratio and solute gain ratio of pomegranate arils. Effective moisture diffusivity of water as well as solute was estimated using the analytical solution of Fick's law of diffusion. For above conditions of osmotic dehydration, average effective diffusivity of water loss and solute gain varied from 2.718 × 10(-10) to 5.124 × 10(-10) m(2)/s and 1.471 × 10(-10) to 5.147 × 10(-10) m(2)/s, respectively. The final product was successfully utilized in some nutritional formulations such as ice cream and bakery products.     

Nano and micro structural studies of thin films of ZnO

Zinc oxide thin films grown by sol–gel and RF sputtering methods have been characterized. The characterization techniques used involve ellipsometry, optical absorption, scanning tunneling microscopy, scanning and transmission electron microscopy. The films grown by sol–gel spin method which followed zinc acetate route exhibited a smoother texture than the films, which were deposited by using zinc nitrate route. The later type of films showed a dendritic character. Nano-structured fine grains of size ranging from 20 to 60 nm were observed with zinc nitrate precursor film. Individual grains show a sharp contrast with different facets and boundaries. Crystal planes and lattice parameters calculated by electron diffraction and X-ray diffraction are quite close and in agreement with the reported values in literature. Scanning tunneling microscopy has been used for measuring the average roughness of the surface and estimating the lattice constants. The STM studies of RF sputtered films, although showing a ZnO structure, exhibited a disturbed lattice. This was presumably due to the fact that after deposition the films were not annealed. Nanographs of 2D and 3D view of atomic positions of ZnO have been presented by using scanning tunneling microscopy.     

Optimisation of processing variables affecting the osmotic dehydration of pomegranate arils

For the optimisation of osmotic dehydration by response surface methodology, the experiments were conducted according to Central Composite Rotatable Design (CCRD) with three variables at five levels. The low and high levels of the variables were 40 and 50 °C for osmotic solution temperature, 45 and 55°Bx for sucrose solution concentration, 60 and 100 min for duration of dipping in osmotic solution, respectively. The fruit to solution ratio was kept 1:4 (w/w) during all the experiments. Before dipping the arils in sucrose solution, the freezing of the whole pomegranate at ?18 °C was carried out to increase the permeability of the outer cellular layer of the arils. The arils were further convectively dehydrated at 60 °C air temperature up to final moisture content of 10% (wb) to make it a shelf stable product. The optimum conditions for osmotic solution concentration, temperature and process duration were 55°Bx, 40 °C and 100 min, respectively.     

Process-induced variability modeling of subthreshold leakage power considering device stacking

The dominance of leakage currents in circuit design has been impelled by steady downscaling of MOSFET into nanometer regime, and has become a significant component of total IC power dissipation. The issue is further aggravated with the inability to gauge the tolerance of process parameters around their nominal value. Consequently, the drive to improve the static power prediction has enticed accurate and reliable modeling of leakage current, specifically for ultralow power applications. In contrast to gate- and band-to-band-tunneling leakages, subthreshold leakage exhibits high susceptibility to process variations and hence has been considered for variability modeling. Fluctuations in the device electrical and geometry parameters result in a wider distribution of subthreshold leakage current. Hence, taking into account stacking effect, an analytical variability model to estimate subthreshold leakage power in subthreshold circuits, in the presence of threshold voltage variations is proposed. Further, the impact of threshold voltage variability on subthreshold leakage power is modeled in conjunction with simultaneous variations in gate length and width. The leakage power variability is characterized by model-generated distributions obtained using Monte Carlo analysis and validated against SPICE simulations. The proposed model is about 700 computationally faster than SPICE simulations with mean error being less than 0.19%.     

Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system

Approximately 1.5-2.5 μm thick nanocomposite coatings of TiAlCrYN were deposited using a four-cathode reactive unbalanced pulsed direct current magnetron sputtering system from the sputtering of Ti, Al, Cr, and Y targets in Ar + N₂ plasma. The TiAlCrYN nanocomposite coatings were deposited on various substrates such as high speed steel (HSS) drill bits, mild steel and silicon. TiAlCrYN coatings with almost similar mechanical properties but with different Ti, Al, Cr and Y contents were prepared to study their thermal stability and machining performance. The structural and mechanical properties of the coatings were characterized using X-ray diffraction and nanoindentation technique, respectively. The elemental composition, bonding structure, surface morphology and cross-sectional data were studied using energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy and field-emission scanning electron microscopy, respectively. Nanoscratch tests were performed to determine the adhesive strength of the coatings. The corrosion behavior of TiAlCrYN nanocomposite coatings on mild steel substrate was studied using potentiodynamic polarization in a 3.5% NaCl solution. Micro-Raman spectroscopy was used to characterize the structural changes as a result of heating of the nanocomposite coatings in air (600-1000 °C). TiAlCrYN coatings prepared at 17 at.% Ti, 13 at.% Al, 21 at.% Cr and 1 at.% Y exhibited thermal stability as high as 900 °C in air (denoted as Sample 3). For the performance evaluation, the TiAlCrYN coated HSS drill bits were tested under accelerated machining conditions. With a drill speed of 800 rpm and a feed rate of 0.08 mm/rev the TiAlCrYN coated HSS drill bits (Sample 3) averaged 657 holes, while drilling a 12 mm thick 304 stainless steel plate under dry conditions, before failure. Whereas, the uncoated drill bits failed after drilling 50 holes under the same machining conditions. Results indicated that for the HSS drill bits coated with TiAlCrYN, the tool life increased by a factor of more than 12.     

Tuning of Cloud Point by the Nature of Surfactant Headgroup: Influence of Counterion and Additives

Work was performed to distinguish the role of sulfonate (–SO₃ ^?) and sulfate (–OSO₃ ^?) with respect to the micellization and clouding phenomenon in ionic surfactant solutions. The clouding phenomenon is a recent addition to the conventional one observed with nonionic surfactants. Three ionic surfactants [sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), and sodium dodecylsulfonate (SDSo)] are chosen and the effects of added tetra-n-pentylammonium bromide (TPeAB) and benzyl tributylammonium bromide (BTAC) have been studied on micellization and clouding behaviors in aqueous solution. Based on critical micelle concentration (CMC) and cloud point (CP) measurements, the following order has been observed: SDBS < SDS < SDSo. Though both SDBS and SDSo contain sulfonate groups, they are found at the two ends of the ordering. Therefore, the role of the phenyl ring is also having importance in clouding phenomena. For a typical surfactant, TPeAB was found to be more effective than BTAC. Based on the CP studies, two compositions of SDSo + TPeAB/BTAC were chosen and the effects of different additives (carbohydrate, amino acid, and l-ascorbic acid) on the CP were investigated. Additive may either decrease or increase CP, depending on the structure of the counterion or additive. The present work shows a few novelties: (1) headgroup/counterion dependence of CP and (2) hydrophobicity of counterion/surfactant has an important bearing on the phenomenon. The data can be utilised in improving cloud point extraction methodologies (CPEMs).     

Properties of YIG-based magnetic glass-ceramics with different nucleating agents

The effect of bismuth, silver oxide and palladium on the crystallization of yttrium iron garnet in Na₂O-SiO₂-Y₂O₃-Fe₂O₃ glass-ceramics has been investigated by X-ray diffraction thermal analysis, magnetic measurements and optical microscopy. It is found that the magnetic properties of these glass-ceramics can be altered significantly by a change in the nucleating agents and the heat treatment schedule. This behaviour is explained on the basis of the microstructure and the volume fraction of the different magnetic phases crystallized within the glasses.