Endocrine disrupting nonylphenols are ubiquitous in food

4-Nonylphenols (NPs) are common products of biodegradation of a widely used group of nonionic surfactants, the nonylphenol ethoxylates (NPEs). These compounds are known to be persistent, toxic, and estrogen active. There is a worldwide scientific and public discussion on the potential consequences of human long term dietary exposure to such endocrine disrupters. Despite numerous determinations of NPs in environmental samples no systematical reports exist relating to concentrations of NPs in food. We analyzed NPs in 60 different foodstuff commercially available in Germany. The results indicate that NPs are ubiquitous in food. The concentrations of NPs on a fresh weight basis varied between 0.1 and 19.4 microg/kg regardless of the fat content of the foodstuff. Based on data on German food consumption rates and these first analyses of NPs in food, the daily intake for an adult was calculated to be 7.5 microg/day NPs. For infants exclusively fed with breast milk or infant formulas daily intakes of 0.2 microg/day and 1.4 microg/day NPs, respectively, can be estimated.     

Novel Aerosol-Based Approach toward Mesoporous Silica Nanoparticles

This study introduces a novel gas-phase method for the synthesis of mesoporous silica nanoparticles (MSNs). The method is a two-step templating approach by first forming silicon-coated carbon structures in a hybrid microwave-plasma/hot-wall reactor followed by an annealing step to produce mesoporous silica with distinct nanostructure and porosity. Two different (sacrificial) carbonaceous templates have been prepared (plasma reactor) and coated (hot-wall reactor), 2D few-layer graphene (FLG) flakes and soot-like fractal aggregates. Results show that the wall thickness of the porous silica structures can be adjusted by changing the concentration of the silicon precursor (monosilane). High monosilane concentrations, however, result in solid silica particles after annealing. Using soot-like particle templates permitted to control of the shell thickness of the hollow porous particles, while the FLG template results in ultrathin silica sheets after heat treatment. The pore volume and specific surface area increase up to 263 m² g⁻¹ and 0.6 cm³ g⁻¹, respectively, by the formation of hollow porous particles. An adsorption study on carbamazepine reveals up to ≈86% removal. The gas-phase aerosol-based template method presented here offers scalability and versatility, and it is capable of producing MSNs with a controlled structure and porosity by modifying the carbonaceous templates.     

Rotary Blanking ‐ a New Manufacturing Process

Rotary blanking is a method of blanking and punching with rotating tools whereby the cutting tools are fixed to a pair of rollers performing a continuous blanking operation on a strip of sheet metal. The purpose of this paper is to outline the determining conditions under which the rotary blanking process takes place and to discuss advantages, restrictions, applications and optimization of this technology.     

Solubilization of fish muscle proteins with buffers containing sodium dodecyl sulfate

Summary The extraction of fish muscle protein using SDS containing solubilization buffers was studied varying the time and the temperature of solubilization, as well as pH and SDS concentration of the buffer. At pH < 6 the myofbrillar proteins were incompletely solubilized; temperatures of 80-100 °C resulted in protein degradation observable in the SDS-PAGE.Samples of fish muscle containing high amounts of formaldehyde (50 mmoles FA/kg wet weight) could only be solubilised at 100 °C; on the other hand it was possible to solubilize cooked and/or canned products under mild conditions (2% SDS, 1% 2-ME, pH 8.9, shaking for 2 h at 60 °C).

---

Solubilisierung von Fischmuskelproteinen durch Natriumdodecylsulfathaltige Puffer

Zusammenfassung Der Einfluß von Solubilisierungszeit und -temperatur, des pH-Wertes und der SDS-Konzentration des Solubilisierungspuffers auf die Extraktion von Fischmuskelproteinen wurde überprüft. Bei pH-Werten < 6 wurden die myofbrillären Proteine nur unvollständig gelöst; Solubilisierungstemperaturen von 80 bis 100 °C führten zu einem in der SDS-PAGE sichtbaren Proteinabbau. Fischmuskelproben mit hohem Formaldehydgehalt (50 mmole FA/kg Feuchtgewicht) ließen sich nur bei 100 °C vollständig solubilisieren; demgegenüber gelang die weitgehende Solubilisierung gegarter und/oder sterilisierter Produkte unter milden Bedingungen (2% SDS, 1% 2-ME, pH 8,9; 2stündiges Schütteln bei 60 °C).

---

Abbreviations FA formaldehyde - IEF isoelectric focusing - 2-ME 2-mercaptoethanol - PA polyacrylamide - PAGE polyacrylamide gel electrophoresis - pI isoelectric point - SDS sodium dodecyl sulfate - TMAO trimethylamine oxide - Tris Tris (hydroxymethyl)methylamine     

Genome-Wide Investigation of Multifocal and Unifocal Prostate Cancer—Are They Genetically Different?

Prostate cancer is widely observed to be biologically heterogeneous. Its heterogeneity is manifested histologically as multifocal prostate cancer, which is observed more frequently than unifocal prostate cancer. The clinical and prognostic significance of either focal cancer type is not fully established. To investigate prostate cancer heterogeneity, the genetic profiles of multifocal and unifocal prostate cancers were compared. Here, we report observations deduced from tumor-tumor comparison of copy number alteration data of both focal categories. Forty-one fresh frozen prostate cancer foci from 14 multifocal prostate cancers and eight unifocal prostate cancers were subjected to copy number variation analysis with the Affymetrix SNP 6.0 microarray tool. With the investigated cases, tumors obtained from a single prostate exhibited different genetic profiles of variable degrees. Further comparison identified no distinct genetic pattern or signatures specific to multifocal or unifocal prostate cancer. Our findings suggest that samples obtained from multiple sites of a single unifocal prostate cancer show as much genetic heterogeneity and variability as separate tumors obtained from a single multifocal prostate cancer.     

Kinetics of Mullite Grain Growth in Alumino Silicate Fibers

Grain growth kinetics of mullite in laboratory-produced and commercial (3M-Nextel 720) alumino silicate fibers was analyzed in the temperature range between 1500° and 1700°C. The lab fibers consist of mullite plus traces of α-alumina, while the phase content of the commercial Nextel 720 fibers is about 60 wt% mullite plus 40 wt%α-alumina. The temperature-induced grain coarsening of mullite follows the empirical law D ^{1/ n} − D ₀^{1/ n} = kt . Two different temperature regimes can be distinguished with respect to the grain growth exponents: above 1600°C the growth exponent is ≈1/3, while below 1600°C the growth exponent of ≈1/12 is exceptionally low. Laboratory-produced and commercial fibers show almost identical mullite grain growth kinetics.     

Identification and Optimization of the First Highly Selective GLUT1 Inhibitor BAY‐876

Despite the long‐known fact that the facilitative glucose transporter GLUT1 is one of the key players safeguarding the increase in glucose consumption of many tumor entities even under conditions of normal oxygen supply (known as the Warburg effect), only few endeavors have been undertaken to find a GLUT1‐selective small‐molecule inhibitor. Because other transporters of the GLUT1 family are involved in crucial processes, these transporters should not be addressed by such an inhibitor. A high‐throughput screen against a library of ～3 million compounds was performed to find a small molecule with this challenging potency and selectivity profile. The N‐(1H‐pyrazol‐4‐yl)quinoline‐4‐carboxamides were identified as an excellent starting point for further compound optimization. After extensive structure–activity relationship explorations, single‐digit nanomolar inhibitors with a selectivity factor of >100 against GLUT2, GLUT3, and GLUT4 were obtained. The most promising compound, BAY‐876 [N⁴‐[1‐(4‐cyanobenzyl)‐5‐methyl‐3‐(trifluoromethyl)‐1H‐pyrazol‐4‐yl]‐7‐fluoroquinoline‐2,4‐dicarboxamide], showed good metabolic stability in vitro and high oral bioavailability in vivo.     

Low molecular weight oligo-β-hydroxybutyric acids and 3-hydroxy-N-phenethyl-butyramide – new products from microorganisms

Summary A new group of low-molecular weight channel-forming oligo(hydroxybutyric acids) (cPHBs, 1 with n = 8–30; main component MW ≈ 1300 dalton) was isolated from microorganisms of different origin. Inclusion bodies were electron-microscopically visible in cells in the state of autolysis, not in cells in the exponential phase of growth. cPHB and high-molecular poly(l3-hydroxybutyric acid) (sPHB) is cleaved by phenylethylamine and forms the corresponding monomeric hydroxybutyramide and – under drastic conditions, the crotylamide. One of these compounds, the 3-hydroxy-N-phenethyl-butyramide (5), was isolated as a new natural product now. Received: 28 March 2002/Revised version: 26 July 2002/ Accepted: 26 July 2002 RID="*" ID="*"Marine Bakterien, XVII. XVI: R.P. Maskey, R.N. Asolkar, E. Helmke, and H. Laatsch, Chalcomycin B, a new antibiotic from a marine Streptomyces sp. B7064. J. Antibiot., submitted 2002 Correspondence to Hartmut Laatsch, e-mail: hlaatsc@gwdg.de, Fax: +49-551-399660     

Energetische Nutzung von Biomasse – Verfahren zur Herstellung von Synthesegas,Wasserstoff, Methanol und flüssigen Brennstoffen

Die Verfahren zur Aufbesserung der Brennstoffeigenschaften von Biomasse orientieren sich weitgehend an der Vergasung oder Verflüssigung von Braunkohle. Die hydrierende Umsetzung der in der Biomasse vorliegenden Biopolymere (Cellulosen, Lignin und Lignocellulosen) erfordern vor dem hydrierenden Angriff den chemischen Abbau der komplexen Biopolymer-Matrix. Man unterscheidet pyrolytische Verfahren (350 bis 500°C, drucklos) von den unter Druck durchgeführten hydrolytischen, solvolytischen und extraktiven Verfahren. Die relativ hohen Investitionskosten der Iysierenden Verfahren erfordern wegen der “Economy of scale” eine Mindestanlagengröße von mehreren hundert MW. Die Biomassevergasung und die darauf aufbauende Wasserstoff und Methanol-Erzeugung aus Biomasse sind vom Investitionsaufwand her gesehen auch für kleinere Anlagen geeignet. In nächster Zukunft dürfte sich die energetische Biomassenutzung allerdings auf die direkte Verbrennung in Biomasse-Heizkraftwerken bzw. die Vergasung und Verstromung des Gases in Brennstoffzellen beschränken.     

Synthesis,characterization, and properties of new siloxane grafted copolyimides

Three new siloxane containing grafted copolyimides have been prepared by one‐pot solution imidization technique. The polymers are made by the reaction of 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) with commercially available diamine 4,4′‐oxydianiline (ODA) with variation of silicon containing diamine, namely 3,5‐diaminobenzoate terminated polydimethylsiloxane (DBPDMS), as a comonomer to 10, 20, and 30 wt %. The films of the polymers were prepared by casting the polymer solution in dichloromethane. The polymers have been well‐characterized by GPC, IR, and NMR techniques. Thermal stabilities and decomposition behavior of the copolyimides were studied by DSC and TGA. The water contact angle values of the films indicate hydrophobic nature of the polymers. Thermal, flame retardant, mechanical, and surface properties of these polymers have been compared with the homopolyimide and with polyimides where polysiloxane is incorporated in the main chain. DSC revealed melting of the grafted siloxane chain at sub‐ambient temperature and a glass transition corresponding to the main polymer chain above 200°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012