Design of pitch conversion component for formation of multibeam optical recording head

We describe a design of a planar lightwave circuit for parallel information processing using visible light. The circuit serves as a pitch conversion component (PCC) that can align multiple beams close together and easily composes a compact optical system that can project optical spots at a narrow pitch on a certain small plane. From the viewpoint of its application to optical recording, a PCC is designed to have over 50 waveguides according to the fabrication of waveguides for a blue-violet beam. It is analytically confirmed that a PCC contributes to the formation of a multibeam optical recording head with numerous beams.     

Mixed Lubrication with C18 Fatty Acids: Effect of Unsaturation

In this paper, the lubrication mechanism of fatty acids is revisited with a new approach combining experimental and computational chemistry studies. The lubricating properties of single and mixtures of stearic, oleic and linoleic acids in a synthetic Poly-Alpha-Olefin base oil (PAO4) on iron oxide surface are investigated under mixed boundary regime with temperatures from 50 °C up to 150 °C. Low friction coefficient (about 0.055) with no visible wear is reported in the presence of single stearic acid at high temperature. This lubricating behavior is inhibited in the presence of unsaturated fatty acids highlighting an anti-synergic effect of a saturated/unsaturated mixture, especially at 150 °C. To understand the anti-synergic effect and the adsorption mechanism of these molecules, molecular dynamic (MD) and quantum chemistry simulations are performed to evaluate their diffusion coefficient in PAO4 and their adsorption mechanism on iron oxide at different temperatures. MD simulation results show a faster diffusion toward the surface for unsaturated fatty acids than for saturated fatty acid at all the studied temperatures. This means that unsaturated molecules arrive and mainly adsorb before stearic acid on the surface leading to a tribological behavior of the mixture characteristic of the unsaturated molecule. Computational chemistry suggests that all fatty acids (saturated and unsaturated) adsorption mechanism is due to the chemisorption of the carboxylic group on iron oxide surface with no desorption up to 150 °C.     

Dextran from Leuconostoc mesenteroides augments immunostimulatory effects by the introduction of phosphate groups

The immunological effects of phosphorylated dextran (in which phosphate groups were chemically introduced) on murine splenocytes were examined. When dextran produced by Leuconostoc mesenteroides was phosphorylated by a reaction with polyphosphoric acid in formamide solution for 48 h, the degree of phosphorylation of dextran was maximal. The highest phosphorus content (1.7%, wt/wt) was observed in 40 kDa of dextran. The mitogenic response of murine splenocytes was enhanced by the phosphorylated dextran, but its activity was not related to its molecular weight. A strong response was detected at a concentration of 10 to 500 microg/ml, and the highest activity was obtained 48 h after stimulation. Phosphorylated dextran was characterized as a B-cell-specific mitogen. The expressions of CD86 on CD8alpha- CD11c- and CD8alpha- CD11c+ cells were augmented by phosphorylated dextran. The levels of mRNA expression of gamma interferon and interleukin-10 on murine splenocytes were also increased by the stimulation. These results demonstrate that dextran exerts immunostimulation by the introduction of phosphate groups.     

Searching for the protein targets of bioactive molecules

The identification of all protein targets of a given drug or bioactive molecule within the human body is a prerequisite for an understanding of its beneficial and deleterious activities. Current approaches to reveal protein targets often fail to reveal physiologically relevant interactions. Here we review a recently introduced yeast-based approach for the identification of the binding partners of small molecules. We discuss the advantages and limitations of the approach using the clinically approved drug sulfasalazine as an example.     

STABILITY TEST OF SRC II DISTILLATES BY ESR

ABSTRACT

The stability of distillates derived from the SRC II coal liquefaction process has been investigated by means of electron spin resonance (e.s.r.). The samples were prepared by storing at room temperature for 8 days in air or in vacuo. The lighter fraction of distillate deteriorated more easily via oxidation than the heavier fraction.     

Burnup analysis and in-core fuel management study of the 3 MW TRIGA MARK II research reactor

The principal objective of this study is to formulate an effective optimal fuel management strategy for the TRIGA MARK II research reactor at AERE, Savar. The core management study has been performed by utilizing four basic types of information calculated for the reactor: criticality, power peaking, neutron flux and burnup calculation. This paper presents the results of the burnup calculations for TRIGA LEU fuel elements. The fuel element burnup for approximately 20 years of operation was calculated using the TRIGAP compute code. The calculation is performed in one-dimensional radial geometry in TRIGAP. Inter-comparison of TRIGAP results with other two calculations performed by MVP-BURN and MCNP4C-ORIGEN2.1 show very good agreement. Reshuffling at 20,000 MWh step provides the highest core lifetime of the reactor, which is 64,500 MWh. Besides, the study gives valuable insight into the behaviour of the reactor and will ensure better utilization and operation of the reactor in future.     

Ideal-Gas Heat Capacity for 2,3,3,3-Tetrafluoropropene (HFO-1234yf) Determined from Speed-of-Sound Measurements

The isobaric ideal-gas heat capacity for HFO-1234yf, which is expected to be one of the best alternative refrigerants for HFC-134a, was determined on the basis of speed-of-sound measurements in the gaseous phase. The speed of sound was measured by means of the acoustic resonance method using a spherical cavity. The resonance frequency in the spherical cavity containing the sample gas was measured to determine the speed of sound. After correcting for some effects such as the thermal boundary layer and deformation of the cavity on the resonance frequency, the speed of sound was obtained with a relative uncertainty of 0.01 %. Using the measured speed-of-sound data, the acoustic-virial equation was formulated and the isobaric ideal-gas heat capacity was determined with a relative uncertainty of 0.1 %. A temperature correlation function of the isobaric ideal-gas heat capacity for HFO-1234yf was also developed.     

Heat labile ribonuclease HI from a psychrotrophic bacterium: gene cloning, characterization and site-directed mutagenesis

The rnhA gene encoding RNase HI from a psychrotrophic bacterium,Shewanella sp. SIB1, was cloned, sequenced and overexpressedin an rnh mutant strain of Escherichia coli. SIB1 RNase HI iscomposed of 157 amino acid residues and shows 63% amino acidsequence identity to E.coli RNase HI. Upon induction, the recombinantprotein accumulated in the cells in an insoluble form. Thisprotein was solubilized and purified in the presence of 7 Murea and refolded by removing urea. Determination of the enzymaticactivity using M13 DNA–RNA hybrid as a substrate revealedthat the enzymatic properties of SIB1 RNase HI, such as divalentcation requirement, pH optimum and cleavage mode of a substrate,are similar to those of E.coli RNase HI. However, SIB1 RNaseHI was much less stable than E.coli RNase HI and the temperature(T_1/2) at which the enzyme loses half of its activity upon incubationfor 10 min was ~25°C for SIB1 RNase HI and ~60°C forE.coli RNase HI. The optimum temperature for the SIB1 RNaseHI activity was also shifted downward by 20°C compared withthat of E.coli RNase HI. Nevertheless, SIB1 RNase HI was lessactive than E.coli RNase HI even at low temperatures. The specificactivity determined at 10°C was 0.29 units/mg for SIB1 RNaseHI and 1.3 units/mg for E.coli RNase HI. Site-directed mutagenesisstudies suggest that the amino acid substitution in the middleof the     

Lubrication performance of multialkylatedcyclopentane oils for sliding friction of steel under vacuum condition

Sliding friction experiments under vacuum lubricated with additive-free multialkylatedcyclopentane (MAC) were carried out using a ball-on-disc tribometer with 440C stainless steel as the material of the specimen. Antiwear characteristics of additive-free MAC during the steady friction region under vacuum were shown to be better than those of perfluoropolyether (PFPE). However, it was found that the friction coefficient lubricated with the additive-free MAC under vacuum showed an initial seizure-like high friction of approximately 0.2 at the beginning of the test, followed by a steady low friction of approximately 0.1. It was also found in contrast that PFPE did not show the initial seizure-like high friction but maintained a lower friction coefficient than 0.1 throughout the experiment. The initial high wear volume lubricated with the additive-free MAC was found to be related to the initial seizure-like high friction. The tricresylphosphate formulation prevented the initial seizure-like high friction. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical high-efficiency extraction study of a short-pulseelectron-beam-pumped ArF laser amplifier with atmospheric pressureAr-rich mixtures

The single-pass (50 cm) amplifier performance of an atmospheric-pressure ArF laser pumped by a 65-ns full-width-at-half-maximum short-pulse electron beam was investigated theoretically for a wide range of excitation rates (0.1-2.0 MW/cm³ ). Atmospheric mixtures of Ne, Ar, and F₂ (three mixtures of Ar=40%, 70%, and Ne-free) were studied. A kinetic numerical model of the ArF amplifier with a Ne buffer system was constructed. A one-dimensional propagation treatment considered the gain depletion and saturation absorption spatially and temporally along the optical axis. In this model the rate constants for electron quenching of ArF* of 1.6×10^-7, 1.9×10^-7, and 2.4×10 ^-7 cm³/s were used for Ar concentration of 40, 70 percent, and Ar/F₂ mixture, respectively