Monitoring web services’ quality of service: a literature review

Monitoring Quality of Service (QoS) compliance is an important procedure in web service environment. It determines whether users’ expectations are met, and becomes the vital factor for them to decide whether to continue paying for the service or not. The monitoring is performed by checking the actual services performance against the QoS stated in Service Level Agreement (SLA). In relation to that, the need for monitoring vague QoS specifications in SLA has become more apparent nowadays. This paper reviews the published literature on web services QoS monitoring. A total of 60 selected articles were systematically analyzed. There were 23 of the articles selected through restrictive search criteria while the other 37 were selected based on unrestrictive search criteria. The review shows that little evidence exists on monitoring vague QoS specifications of web services. Providing ability for monitoring QoS that is specified vaguely in SLA could give new insights and implications to web services field. This paper concludes with some recommended future works to construct the theory and perform the empirical research.     

Feature extraction and ML techniques for static gesture recognition

The main objective of this study is to explore the utility of a neural network-based approach in hand gesture recognition. The proposed system presents two recognition algorithms to recognize a set of six specific static hand gestures, namely open, close, cut, paste, maximize, and minimize. The hand gesture image is passed through three stages: preprocessing, feature extraction, and classification. In the first method, the hand contour is used as a feature that treats scaling and translation of problems (in some cases). However, the complex moment algorithm is used to describe the hand gesture and to treat the rotation problem in addition to scaling and translation. The back-propagation learning algorithm is employed in the multilayer neural network classifier. The second method proposed in this article achieves better recognition rate than the first method.     

A comprehensive study on RF MEMS switch

This paper emphasis on state-of-the-art of the earlier until the current trend and demand, principles, design considerations, key performance and fabrication technology of RF MEMS switch devices developed over the past few years. RF MEMS switch performance and features such as actuation voltage, insertion loss, isolation and ease with cost of fabrication and applications are compared and discussed.     

Using heuristic algorithms for capacity leasing and task allocation issues in telecommunication networks under fuzzy quality of service constraints

Nowadays, every firm uses telecommunication networks in different amounts and ways in order to complete their daily operations. In this article, we investigate an optimisation problem that a firm faces when acquiring network capacity from a market in which there exist several network providers offering different pricing and quality of service (QoS) schemes. The QoS level guaranteed by network providers and the minimum quality level of service, which is needed for accomplishing the operations are denoted as fuzzy numbers in order to handle the non-deterministic nature of the telecommunication network environment. Interestingly, the mathematical formulation of the aforementioned problem leads to the special case of a well-known two-dimensional bin packing problem, which is famous for its computational complexity. We propose two different heuristic solution procedures that have the capability of solving the resulting nonlinear mixed integer programming model with fuzzy constraints. In conclusion, the efficiency of each algorithm is tested in several test instances to demonstrate the applicability of the methodology.     

Sr2+–Mg2+-Doped SiAlON Ceramics

In the present work, multi-cation-doped (Sr²⁺–Mg²⁺) SiAlON ceramics were investigated. MgO and SrO were used in 100:0 and 50:50 molar ratios. The mixture was sintered at 1800° and 1830°C for 1 h in a gas pressure-sintering furnace. The results showed that sintered samples were composed of mainly α- and β-SiAlON phases and small amounts of some Sr-containing phases and SiAlON polytypes. According to Rietveld analysis of X-ray diffraction patterns, Mg is incorporated into the α-SiAlON structure. However, the incorporation of Sr is limited.     

A portable wireless body sensor data logger and its application in video capsule endoscopy

Due to the advancement of low power miniature electronic devices, there is growing interest of physiological data sensing and recording using wireless body sensor networks. The paper presents the design of a portable physiological data logger that includes rechargeable battery, wireless radio frequency and Bluetooth connectivity, and graphical display with touch screen capability. The target application is video capsule endoscopy. Image data are logged in micro SD cards which can be easily transferred to PC or Smartphone using SD card reader, USB interface or Bluetooth wireless link. The hardware design is general and can be used in various medical or industrial applications by changing only the firmware of the microcontroller. The design is prototyped in 109 × 107 × 20 mm printed circuit board (PCB). Tests with animal tissues have been conducted to demonstrate the performance advantages of the data logger. A demonstration of wireless heart pulse monitoring and data logging is also presented.     

Catalytic combustion over platinum group catalysts: fuel-lean versus fuel-rich operation

Performance data are presented for methane oxidation on alumina-supported Pd, Pt, and Rh catalysts under both fuel-rich and fuel-lean conditions. Catalyst activity was measured in a micro-scale isothermal reactor at temperatures between 300 and 800 °C. Non-isothermal (near adiabatic) temperature and reaction data were obtained in a full-length (non-differential) sub-scale reactor operating at high pressure (0.9 MPa) and constant inlet temperature, simulating actual reactor operation in catalytic combustion applications.

Under fuel-lean conditions, Pd catalyst was the most active, although deactivation occurred above 650 °C, with reactivation upon cooling. Rh catalyst also deactivated above 750 °C, but did not reactivate. Pt catalyst was active above 600 °C. Fuel-lean reaction products were CO₂ and H₂O for all three catalysts.

The same catalysts tested under fuel-rich conditions demonstrated much higher activity. In addition, a ‘lightoff’ temperature was found (between 450 and 600 °C), where a stepwise increase in reaction rate was observed. Following ‘lightoff’ partial oxidation products (CO, H₂) appeared in the mixture, and their concentration increased with increasing temperature. All three catalysts exhibited this behavior.

High-pressure (0.9 MPa) sub-scale reactor and combustor data are shown, demonstrating the benefits of fuel-rich operation over the catalyst for ultra-low emissions combustion.     

Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor

In order to develop and test the integration procedure, in this paper a real time process integration involving the optimization and control of the process is presented, in this case, with the two-layer approach. The used optimization algorithms were Levenberg–Marquardt and SQP that solve a non-linear least square problem subject to bounds on the variables. The two-layer approach is a hierarchical control structure where an optimization layer calculates the set points and manipulated variables to the advanced controller, which is based on the dynamic matrix control with constraints (QDMC). The non-isothermal dynamic model of the three-phase slurry catalytic reactor with appropriate solution procedure was utilized in this work (Vasco de Toledo, E. C., Santana, P. L., Maciel, M. R. W., & Maciel Filho, R. (2001). Dynamic modeling of a three-phase catalytic slurry reactor. Chemical Engineering Science, 56, 6055–6061). The model consists on mass and heat balance equations for the catalyst particles as well as for the bulk phases of gas and liquid. The model was used to describe the dynamic behavior of hydrogenation reaction of o-cresol to obtain 2-methil-cyclohexanol, in the presence of a catalyst Ni/SiO₂.     

Thermal deformation analysis of tabbed solar cells using solder alloy and conductive film

Finite element analysis (FEA) has been carried out with the aim of understanding the thermal deformation characteristics of two solar cell configurations. One of the solar cell models is tabbed by lead-free solder, the other model by Conductive film (CF). A high temperature soldering process could weaken the bond and reduce the reliability of the cells because of the residual stress caused by the different thermal expansion coefficients of the materials. Moreover, solar irradiation generates temperature distribution across the surface of the solar cell, and the development of solar cells made of thinner crystalline silicon wafers will lead to the reduction in manufacturing costs. In this study, Finite element analysis (FEA) of the manufacturing process has been carried out using both solder and CF bonding. Three temperature cycles were applied to analyze different environmental operating conditions and understand how thermal cycles affect the residual stress during actual service conditions. This investigation provides a comparison of thermal deformations between solder and CF bonded solar cells in order to understand which offers substantial reliability in the long term. Also this study explores the effects of various thicknesses of the silicon wafer on the residual stress and deformation of the solar cells.     

云环境下基于本体的用户行为分析引擎研究

针对当前大型互联网站提升用户体验的需求,本研究创造性地提出基于本体的用户行为分析引擎的思想,它通过上下文感知技术,实时获取用户访问页面时的上下文信息(以下也称为动态行为),基于本体对用户行为建模,建立基于规则的上下文推理算法,对监测到的动态用户行为进行实时推理,及时反馈结果信息给用户。实验表明:本研究理论上独辟蹊径,设计实现上结合了云存储技术,能够一定程度改善用户体验效果。