Factors influencing encapsulation behavior in composite droplet-type polymer blends

In this study the influence of the molecular weight of the dispersed phase components on encapsulation effects in the composite droplet phase was examined for high density polyethylene (HDPE)/PS/PMMA ternary blends. Three different blends composed of various PS and PMMA materials dispersed in an HDPE matrix were prepared using an internal mixer. The morphology was studied by light and electron microscopy. Current models used for predicting encapsulation effects and composite droplet formation in ternary systems (based on static interfacial tension) predict in all cases that PS will encapsulate the PMMA. However, in one case, an unexpected encapsulation of PS by PMMA was observed. It was found that arguments based on the effect of viscosity ratio or the absolute viscosity of the different dispersed phases do not explain that discrepancy. In addition, the reversal of that latter composite droplet morphology from PMMA encapsulating PS to PS encapsulating PMMA was observed upon annealing treatment. Considering all the above, a conceptual model was developed to predict encapsulation effects in composite droplet type systems based on the use of a dynamic interfacial tension (i.e. taking into account the elasticity of the polymer components). Calculations based on the dynamic interfacial tension model, using elasticities based on constant shear stress, were able to account for all of the observed encapsulation effects in this study.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

Thermal characterization of n‐alkyl maleate‐styrene‐allyl propionate terpolymers

Thermal characterization of maleic anhydride‐styrene‐allyl propionate (MA‐St‐AP) terpolymer and its ester derivatives named as n‐alkyl maleate and shown as nPr MA‐St‐AP, nBu MA‐St‐AP, nPn MA‐St‐AP, and nBz MA‐St‐AP was carried out. The thermal characterization was performed using thermal analysis techniques such as TGA, DTA, DSC, and TMA. Different results were observed between the original terpolymer and its ester derivatives. Thermal stabilities of the terpolymer and its ester derivatives were compared by using various measurements plotted as TGA, DTA, DSC, and TMA curves. The increase in the alcohols' carbon numbers added to the original terpolymer results in ester derivatives with different thermal stability behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 600–604, 2007     

Combined Ozone Pretreatment and Anaerobic Digestion for the Reduction of Biological Sludge Production in Wastewater Treatment

The ever-increasing amount of solid waste generated by wastewater treatment plants highlights emerging economic and environmental issues. In order to develop new processes producing less sludge, the use of ozone combined with anaerobic digestion was investigated for waste activated sludge treatment. This paper was aimed at evaluating the impact of ozone pretreatment on anaerobic digestion and particularly the enhancement of biogas production. Sludge solubilization was estimated in terms of modification of chemical oxygen demand, solids and nitrogen. Batch anaerobic digestion highlighted the enhancement of ozonated sludge biodegradability. Ozonation led to an increase in biogas production. The ozone dose of 0.15 g O₃/g total solids resulted in a considerable increase in the soluble COD ratio from 4% to 37%. This ozone dose achieved the highest increase in biogas production: 2.4 times greater than without chemical pretreatment.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

Using heuristic algorithms for capacity leasing and task allocation issues in telecommunication networks under fuzzy quality of service constraints

Nowadays, every firm uses telecommunication networks in different amounts and ways in order to complete their daily operations. In this article, we investigate an optimisation problem that a firm faces when acquiring network capacity from a market in which there exist several network providers offering different pricing and quality of service (QoS) schemes. The QoS level guaranteed by network providers and the minimum quality level of service, which is needed for accomplishing the operations are denoted as fuzzy numbers in order to handle the non-deterministic nature of the telecommunication network environment. Interestingly, the mathematical formulation of the aforementioned problem leads to the special case of a well-known two-dimensional bin packing problem, which is famous for its computational complexity. We propose two different heuristic solution procedures that have the capability of solving the resulting nonlinear mixed integer programming model with fuzzy constraints. In conclusion, the efficiency of each algorithm is tested in several test instances to demonstrate the applicability of the methodology.     

Sr2+–Mg2+-Doped SiAlON Ceramics

In the present work, multi-cation-doped (Sr²⁺–Mg²⁺) SiAlON ceramics were investigated. MgO and SrO were used in 100:0 and 50:50 molar ratios. The mixture was sintered at 1800° and 1830°C for 1 h in a gas pressure-sintering furnace. The results showed that sintered samples were composed of mainly α- and β-SiAlON phases and small amounts of some Sr-containing phases and SiAlON polytypes. According to Rietveld analysis of X-ray diffraction patterns, Mg is incorporated into the α-SiAlON structure. However, the incorporation of Sr is limited.     

Uncooperative gait recognition by learning to rank

Gait is a useful biometric because it can operate from a distance and without subject cooperation. However, it is affected by changes in covariate conditions (carrying, clothing, view angle, etc.). Existing methods suffer from lack of training samples, can only cope with changes in a subset of conditions with limited success, and implicitly assume subject cooperation. We propose a novel approach which casts gait recognition as a bipartite ranking problem and leverages training samples from different people and even from different datasets. By exploiting learning to rank, the problem of model over-fitting caused by under-sampled training data is effectively addressed. This makes our approach suitable under a genuine uncooperative setting and robust against changes in any covariate conditions. Extensive experiments demonstrate that our approach drastically outperforms existing methods, achieving up to 14-fold increase in recognition rate under the most difficult uncooperative settings.     

A portable wireless body sensor data logger and its application in video capsule endoscopy

Due to the advancement of low power miniature electronic devices, there is growing interest of physiological data sensing and recording using wireless body sensor networks. The paper presents the design of a portable physiological data logger that includes rechargeable battery, wireless radio frequency and Bluetooth connectivity, and graphical display with touch screen capability. The target application is video capsule endoscopy. Image data are logged in micro SD cards which can be easily transferred to PC or Smartphone using SD card reader, USB interface or Bluetooth wireless link. The hardware design is general and can be used in various medical or industrial applications by changing only the firmware of the microcontroller. The design is prototyped in 109 × 107 × 20 mm printed circuit board (PCB). Tests with animal tissues have been conducted to demonstrate the performance advantages of the data logger. A demonstration of wireless heart pulse monitoring and data logging is also presented.