Combined effect of gamma-irradiation and conventional cooking onAeromonas hydrophila in meatball

Irradiation combined with a conventional cooking procedure was applied to meatball and the effects on bacterial load and inoculatedAeromonas hydrophila were determined. Meatball samples were irradiated by using a⁶⁰Co source at the dose levels of 0, 0.30,0.75,1.50,2.50 kGy and cold stored at 4±1°C for 7 days. Bacterial load and the count ofA. hydrophila decreased when the irradiation dose level increased. A minimum inhibition effect was found at the dose of 0.30 kGy. Irradiation in combination with a conventional cooking procedure was found to be more effective in reducingA. hydrophila and the bacterial load in meatball. This study indicated that a dose of 0.75 kGy was sufficient to destroy approximately 10⁴ cfu/g ofA. hydrophila in meatball.     

Thermoelectric and Magnetic Properties of Pt-Substituted $${BaFe_{4-{x}}Pt_{{x}}Sb_{12}}$$ Compounds

\({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds were prepared by melting and annealing, followed by a spark plasma sintering method. Low-temperature thermoelectric and magnetic properties were investigated based on Seebeck coefficient, electrical and thermal conductivity and magnetization measurements. The structural properties of \({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds were ascertained by powder x-ray diffraction analysis, confirming that all samples have a main phase of a skutterudite structure with the space group Im\({\mathrm {\bar{3}}}\). The lattice parameters obtained, 9.202(5), 9.199(5) and 9.202(1) Å for x = 0, 0.1 and 0.2, respectively, were found consistent with literature. The Seebeck coefficient sign shows that holes are dominant carriers in all compounds. The local maximum Seebeck coefficient was observed around 50 K which may be a trace of paramagnon-drag effect of charge carriers. Thermal conductivity and electrical resistivity measurements were carried out between 4.2 and 300 K. Temperature dependence of electrical resistivity reflects that all samples show semi-metallic behavior in our temperature range of 4.2–300 K. Samples for x = 0.1 and x = 0.2 show Kondo-like behavior. In magnetization measurement, we observe that there are two successive magnetic transitions in Pt-substituted compounds; however, there is only one (transition from a paramagnetic state to long-range magnetic ordering) in Pt-free compounds. In Pt-substituted compounds, the first transition appears at \( T _{ {\rm c}}\) = 48 K. In addition, the second transition is observed at \( T _{ {\rm irr}}\) = 30 K where an intermediate state is observed before the magnetic ordering transforms to an irreversible ferromagnetic state. We concluded that Pt substitution on the Fe side effectual on the thermoelectric and magnetic properties of \({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds.     

Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

Die zweite Phase der Feldbusentwicklung

The past decade may be regarded as the phase of the fundamental developments in fieldbus systems that were based on the OSI model. Today we are entering a second stage. It is the objective of this issue to present the current state and where the further developments will lead to. This introductory article is intended to give an overview on the subject.     

Auswirkungen von Blitzschlägen auf 20-kV-Energiekabel

Recently appeared defects on high voltage cables have required an urgent evaluation of the impact of lightning strikes necessary. In some cases overvoltages between the copper wire screen of the cable and earth may appear which cause damages of the cablesheath. Field measurements with a classification of the voltage impulses at the copper wire screen have been made to evaluate the number of events. Additionally a numerical model was developed to study the effects of atmospheric discharges on underground cables with emphasis to the influence on the cablesheath. This numeric method was also applied to estimate the effectiveness of different protection arrangements. This contribution presents evaluation methods for overvoltages of cables and a model used firstly for calculating the stress caused by differential voltages and secondly to determinate the influence of protection measures.     

Messmethoden zur Charakterisierung von Mikrowellenleistungstransistoren

For first try designs of microwave power amplifiers it is necessary to know the entire physical behaviour of the used components with high accuracy. The attention should be directed especially to the center component of these circuits, the power transistor, whose nonlinear characteristics have an essential impact on the behavior of the whole amplifier. This article gives an overview of current methods of measurement for microwave power transistor characterization. Furthermore a measurement system is presented, capable of characterizing microwave power transistors within a frequency range from 30 kHz to 8.7 GHz at bias current up to 7.5 A including self heating effects.     

毛细管放电激励类氖-氩离子X光激光研究

以类氖 氩离子跃迁线为例 ,应用一维的Lagrangian程序———XDCH研究了毛细管放电碰撞机制激励软X光激光的物理机制 ;对等离子体的Z 箍缩过程和 46 9nm谱线产生增益的条件进行了讨论 ;并分析了毛细管放电装置中产生软X激光的可能性。     

Performance Analysis of a New MAC Protocol for Wireless Cognitive Radio Networks

Wireless Personal Communications - In this study, network performance analysis of a newly proposed cognitive radio wireless network (CRWN) medium access control (MAC) protocol is investigated in...     

Power Reflection and Transmission Coefficients for Meander‐Line Polarizers with a Chiral Slab

This paper presents a theoretical investigation of power reflection and transmission coefficients for a meander‐line polarizer placed periodically on a chiral slab. It is assumed that a linearly polarized transverse magnetic wave is incident on a chiral slab from the air region. In the analysis, we derive the electric and magnetic fields in the modal form in the air and chiral regions. We obtain power reflection and transmission coefficients in a straightforward manner after matching the tangential components of the electric and magnetic fields at the boundaries. We present numerical results for the power reflection and transmission coefficients versus frequency and incident angle for different values of the chirality admittance. A meander‐line polarizer placed on a dielectric slab can convert a linearly polarized wave to a circularly polarized wave. The design parameters for a meander‐line polarizer are the dimensions of the meander‐line and the values of the dielectric slab. Replacing a dielectric slab with a chiral slab introduces a new independent parameter which controls the wave polarization.     

Air Processing of Thick and Semitransparent Laminated Polymer:Non-Fullerene Acceptor Blends Introduces Asymmetric Current–Voltage Characteristics

Non-fullerene acceptors have recently revolutionized indoor organic photovoltaics (OPVs) with power conversion efficiencies exceeding 30% in laboratory scale. Nevertheless, transferring their superior performance to larger-scale prototyping, i.e., air-processing via roll-to-roll compatible techniques, still shows severe challenges. Herein, the industrial potential of the PM6:IO4Cl blend, which is one of the most successful indoor OPV photoactive layers (PALs), is thoroughly investigated. The corresponding thick and semitransparent laminated devices are fabricated entirely in air, by blade and slot-die coating. Their current–voltage (J–V) characteristics show anomalous features depending on the illumination side, with the cathode side generally outperforming the anode counterpart. Electrical and optical modeling reveal that a plausible cause of such a phenomenon is a dead layer that forms at the PAL/anode contact interface that does not contribute to the photocurrent. Said layer becomes undetectable when the PALs are made thin enough (<35 nm each) leading to symmetric J–V curves and improved light utilization efficiency. By screening the photovoltaic performance of multiple donor:acceptor blends, certain all-polymer and polymer:fullerene PALs are identified as adequately symmetric candidates for thick device up-scaling. Finally, ternary blends based on PM6:IO4Cl:fullerene may constitute a viable route to mitigate the electrical asymmetry detected on conventional binary blends.