Lie group analysis for the effects of temperature-dependent fluid viscosity and chemical reaction on MHD free convective heat and mass transfer with variable stream conditions

This paper concerns with a steady two-dimensional flow of an electrically conducting incompressible fluid over a vertical stretching surface. The flow is permeated by a uniform transverse magnetic field. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The system remains invariant due to some relations among the parameters of the transformations. After finding three absolute invariants a third-order ordinary differential equation corresponding to the momentum equation and two second-order ordinary differential equation corresponding to energy and diffusion equations are derived. The equations along with the boundary conditions are solved numerically. It is found that the decrease in the temperature-dependent fluid viscosity makes the velocity to decrease with the increasing distance of the stretching sheet. At a particular point of the sheet the fluid velocity decreases with the decreasing viscosity but the temperature increases in this case. It is found that with the increase of magnetic field intensity the fluid velocity decreases but the temperature increases at a particular point of the heated stretching surface. Impact of chemical reaction in the presence of thermal radiation plays an important role on the concentration boundary layer. The results thus obtained are presented graphically and discussed.     

Mechanisation of large‐scale agricultural fields in developing countries – a review

Mechanisation of large‐scale agricultural fields often requires the application of modern technologies such as mechanical power, automation, control and robotics. These technologies are generally associated with relatively well developed economies. The application of these technologies in some developing countries in Africa and Asia is limited by factors such as technology compatibility with the environment, availability of resources to facilitate the technology adoption, cost of technology purchase, government policies, adequacy of technology and appropriateness in addressing the needs of the population. As a result, many of the available resources have been used inadequately by farmers, who continue to rely mostly on conventional means of agricultural production, using traditional tools and equipment in most cases. This has led to low productivity and high cost of production among others. Therefore this paper attempts to evaluate the application of present day technology and its limitations to the advancement of large‐scale mechanisation in developing countries of Africa and Asia. Particular emphasis is given to a general understanding of the various levels of mechanisation, present day technology, its management and application to large‐scale agricultural fields. This review also focuses on/gives emphasis to future outlook that will enable a gradual, evolutionary and sustainable technological change. The study concludes that large‐scale‐agricultural farm mechanisation for sustainable food production in Africa and Asia must be anchored on a coherent strategy based on the actual needs and priorities of the large‐scale farmers. © 2016 Society of Chemical Industry     

Reliability assessment and mechanical characterization of Cu and Au ball bonds in BGA package

Extended reliability and mechanical characterisation of Au and Pd-coated Cu (Cu) ball bonds are useful technical information for Au and Cu wire deployment in semiconductor device packaging. This paper discusses the influence of wire type on the package reliability and mechanical performance after several component reliability stress tests. Failure analysis has been conducted to identify the associated failure mechanisms of Au and Cu ball bonds after reliability tests. Wire pull strength and ball bond shear (with its break modes) of both wire types are investigated after unbiased highly accelerated temperature and humidity stress test (UHAST), temperature cycling (TC) and high temperature storage life test (HTSL) at various aging temperatures. Reliability Weibull plots have been plotted for each reliability stresses. Obviously Au ball bond is found with longer time-to-failure in Unbiased HAST stress compare to Cu ball bonds. Cu wire exhibits equivalent package and or better reliability margin compare to Au ball bonds in TC and HTSL tests. Failure mechanisms of UHAST and HTSL have been proposed and its mean-time-to failure (t₅₀), characteristics life (t_63.2, η) and shape parameter (ß) have been discussed in this paper.     

Considerations of uncertainties in evaluating dynamic reliability by GO-FLOW methodology – example study of reliability monitor for PWR safety system in the risk-monitor system

The uncertainty analyses have been considered as a relevant topic since WASH-1400 and analysis was performed for identifying the risk measure, e.g. plant- and core-damage frequency or the frequency of a large early release of radioactivity in the probabilistic safety assessment (PSA) or probabilistic risk assessment. There are two main sources of uncertainty such as aleatory uncertainty and epistemic uncertainty (parameter uncertainty, model uncertainty and completeness uncertainty) for risk analysis in PSA or risk-monitor system. A sensitivity analysis is related field to uncertainty, which can provide information of the most effective on those inputs of PSA, which are mostly contributed to the uncertainty.

In this paper, uncertainty analysis (epistemic) has been conducted in the evaluation of dynamic reliability of safety-related subsystem for risk analysis. GO-FLOW methodology has been employed for the procedure of uncertainty analysis alternatively to Fault Tree Analysis and Even Tree because it is success-oriented system-analysis technique and comparatively easy to conduct the reliability analysis of the complex system. The method used sample data from Monte Carlo simulation to quantify uncertainty in terms of appropriate estimates for analysis results. Pressurized water reactor containment spray system has been taken as an example of safety-related subsystem. The results of this paper show that the uncertainty analysis is an important part for the practical evaluation of the system dynamic reliability and makes the reliability prediction more accurate compared with the result without the uncertainty analysis. The GO-FLOW methodology can be employed easily for uncertainty analysis with its advance functions.     

A new modified differential evolution algorithm scheme-based linear frequency modulation radar signal de-noising

The main intention of this study was to investigate the development of a new optimization technique based on the differential evolution (DE) algorithm, for the purpose of linear frequency modulation radar signal de-noising. As the standard DE algorithm is a fixed length optimizer, it is not suitable for solving signal de-noising problems that call for variability. A modified crossover scheme called rand-length crossover was designed to fit the proposed variable-length DE, and the new DE algorithm is referred to as the random variable-length crossover differential evolution (rvlx-DE) algorithm. The measurement results demonstrate a highly efficient capability for target detection in terms of frequency response and peak forming that was isolated from noise distortion. The modified method showed significant improvements in performance over traditional de-noising techniques.     

Simulation study of temperature sensitivity of silicon nanowire transistors with different types of orientations

This paper presents the temperature characteristics of a silicon nanowire transistor and its use as a temperature sensor. The OMEN nanowire simulation tool was used to investigate the temperature characteristics of the transistor. Current–voltage characteristics with different values of temperature for three orientations were simulated. The metal–oxide–semiconductor (MOS) diode connection suggests the use of the silicon nanowire transistor as a temperature nanosensor. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Application of Taguchi method for the optimization of Fe2+ removal from contaminated synthetic groundwater using a rotating packed bed contactor

Malaysia contains elevated levels of iron in shallow groundwater in the range of 3–7 mg Fe/L compared to the USEPA safe limit of 0.3 mg Fe/L. Air Kelantan Sdn Bhd in Malaysia uses the ‘River Bank Filtration’ (RBF) technology to harvest hyporheic water. The RBF treatment removes the turbidity of the river water through the river bed acting as a filter, but is unable to remove the Fe from the harvested water. This work proposes a technology to reduce Fe concentration in the extracted water using granular activated carbon in a laboratory‐scale rotating packed bed contactor (RPBC). The Taguchi method was used for optimizing the operating conditions for the adsorption of Fe onto activated carbon in the RPBC system. Taguchi optimization results showed that a removal efficiency of 87% Fe from a 50 mg Fe/L concentration could be achieved by a RPBC at an initial pH of 6.5, a feed rate of 40 L/h, a rotating speed of 1600 rpm and a packing density of 357 kg/m³.     

Digital signal propagation delay in a nano-circuit containing reactive and resistive elements

The transient switching delay in a micro/nano-scale circuit containing resistive and reactive elements are sternly affected by the surge in the resistance arising from sub-linear current-voltage (I-V) characteristics limited by the velocity and current saturation. The saturation arises due to the realignment of randomly oriented velocity vectors to the unidirectional streamlined ones in a high electric field when voltage applied across a resistor exceeds its decreasing critical value with reduced channel length. The frequency response f = 1/2πτ_t is affected by a transit time delay τ_t is lower than that predicted from the application of Ohm’s law. The resistance surge dramatically boosts the RC time constant and switching delay and attenuates the L/R time constant and switching delay.     

Use of a Reflectance Spectroscopy Accessory for Optical Characterization of ZnO-Bi(2)O(3)-TiO(2) Ceramics

The optical band-gap energy (E(g)) is an important feature of semiconductors which determines their applications in optoelectronics. Therefore, it is necessary to investigate the electronic states of ceramic ZnO and the effect of doped impurities under different processing conditions. E(g) of the ceramic ZnO + xBi(2)O(3) + xTiO(2), where x = 0.5 mol%, was determined using a UV-Vis spectrophotometer attached to a Reflectance Spectroscopy Accessory for powdered samples. The samples was prepared using the solid-state route and sintered at temperatures from 1140 to 1260 °C for 45 and 90 minutes. E(g) was observed to decrease with an increase of sintering temperature. XRD analysis indicated hexagonal ZnO and few small peaks of intergranular layers of secondary phases. The relative density of the sintered ceramics decreased and the average grain size increased with the increase of sintering temperature.     

Stability of PVDF hollow fibre membranes in sodium hydroxide aqueous solution

The stability of PVDF hollow fibre membranes in sodium hydroxide (NaOH) aqueous solutions were investigated in this study. PVDF hollow fibre membranes were prepared from each of the three commercial raw PVDF materials (Kynar 761, Solef 1015 and Solef 6010) from two major suppliers (Atofina Chemicals Inc., USA and Solvay, Belgium) for comparison purposes. The effect of NaOH concentration, treatment time and temperature on mechanical properties, thermal properties and crystalline structure of the PVDF hollow fibre membranes were investigated through mechanical strength measurement, surface area analysis, XRD, FTIR and DSC analyses. The obtained results indicate that the reaction between PVDF and NaOH was initiated even at low concentrations of NaOH and was aggravated with the extended treatment time, resulting in the decrease in mechanical strength and crystallinity of PVDF hollow fibre membranes. The reaction was accelerated and intensified by increasing the concentration of NaOH and/or treatment temperature. At 70 °C, the mechanical integrity of the PVDF membranes was completely destroyed in 4 wt% NaOH solution within 24 h or in 10 wt% NaOH solution within 8 h. The deterioration of stability in NaOH solutions is considered universal for all PVDF employed in this study, irrespective of the raw materials or the corresponding hollow fibre membranes.