NBTI degradation effect on advanced-process 45 nm high-k PMOSFETs with geometric and process variations

Negative bias temperature instability (NBTI) has become an important reliability concern for nano-scaled complementary metal oxide (CMOS) devices. This paper presents the effect of NBTI for a 45 nm advanced-process high-k dielectric with metal gate PMOS transistor. The device had incorporated advanced-process flow steps such as stress engineering and laser annealing in order to achieve high on-state drain current drive performance. To explore NBTI effects on an advanced-process sub-micron device, the 45 nm high-k PMOS transistor was simulated extensively with a wide range of geometric and process variations. The device was simulated at varying thicknesses in the dielectric layer, oxide interfacial layer, metal gate and polysilicon layer. In order to observe the NBTI effect on process variation, the NBTI degradation of the 45 nm advanced-process PMOS is compared with a 45 nm PMOS device which does not employ process-induced stress and incorporates the conventional rapid thermal annealing (RTA) as compared to the laser annealing process which is integrated in the advanced-process device flow. The simulation results show increasing degradation trend in terms of the drain current and threshold voltage shift when the thicknesses of the dielectric layer, oxide layer as well as the metal gate are increased.     

Development of a novel,ultra‐performance polymer cement: In situ formation of benzoxazine monomer and subsequent formation of polybenzoxazine/cement composites

The feasibility of making a high strength, water resistant polymer cement with 6,6′‐bis(2,3‐dihydro‐3‐methyl‐4H‐1,3‐benzoxazinyl) isopropylidiene (bisphenol‐A) and methylamine‐based benzoxazine, is examined. The polymer cement composites are made by room temperature combination of monomer precursors, solvent, and alumina cement. The subsequent monomer formation, in both the presence and absence of cement, is measured with respect to time by ¹H nuclear magnetic resonance spectroscopic analysis (NMR) of the reaction products. The addition of high alumina cement to the monomer precursors results in accelerated benzoxazine monomer formation at room temperature. The mechanism of monomer formation is discussed. Decreased polymerization temperature of the benzoxazine monomer in the presence of cement is studied by thermal analysis. Solvent is found to have little to no effect on the monomer formation and cure. A compressive strength as high as 250 MPa and a 90 day room temperature water absorption of less than 3% is achieved with no further addition of modifiers. POLYM. COMPOS., 2010. © 2010 Society of Plastics Engineers     

Improvement of Foaming Property of Egg White Protein by Phosphorylation through Dry-Heating in the Presence of Pyrophosphate

ABSTRACT:  Egg white protein (EWP) was phosphorylated by dry-heating in the presence of pyrophosphate at pH 4 and 85 °C for 1 d, and the foaming properties of phosphorylated EWP (PP-EWP) were investigated. The phosphorus content of EWP increased to 0.71% as a result of phosphorylation. To estimate the foaming properties of EWP, the foams were prepared by 2 methods: bubbling of the 0.1% (w/v) protein solution and whipping of the 10% (w/w) protein solution with an electric mixer. The foaming power, which was defined as an initial conductivity of foam from 0.1% (w/v) protein solution, was a little higher in PP-EWP than in native EWP (N-EWP), and the foaming stability of PP-EWP was much higher than that of dry-heated EWP (DH-EWP) and N-EWP. The microscopic observation of foams from the 10% (w/w) solution showed that the foams of PP-EWP were finer and more uniform than those of N- and DH-EWP. Although there were no significant differences in the specific gravity and overrun of the foams between PP- and DH-EWP ( P  < 0.05), the specific gravity and overrun of the foams from PP-EWP were smaller and higher, respectively, than that of the foams from N-EWP. The drainage volume was smaller in the foams from PP-EWP than in those from N- and DH-EWP. These results demonstrated that phosphorylation of EWP by dry-heating in the presence of pyrophosphate improved the foaming properties, and that it was more effective for the foam stability than for the foam formation.     

Strengths of C/C composites under tensile, shear, and compressive loading: Role of interfacial shear strength

Various strengths of carbon–carbon composites (C/Cs) are comprehensively reviewed. The topics reviewed include tensile, shear, compressive, and fatigue strength as well as fiber/matrix interfacial strength of C/Cs. When data are available, high temperature properties, including creep behavior, are presented. Since C/Cs have extremely low fiber/matrix interfacial strength τ_d, the interfacial fracture plays important roles in all of the fracture processes dealt in this review. The low τ_d was found to divide tensile fracture units into small bundles, to seriously degrade both shear and compressive strength, and to improve fatigue performance. In spite of the importance of the interfacial strength of C/Cs, techniques for its evaluation and analysis are still in a primitive stage.     

Hydroxyl radical-induced cross-linking of thymine and lysine: identification of the primary structure and mechanism

Hydroxyl radical-induced formation of a cross-link of thymine (Thy) and lysine (Lys) in the gamma-radiolysis of N2O-saturated aqueous solution was studied. A Thy-Lys cross-link (I) of the formal structure that OH radical and 4-carbon-centered Lys radical added respectively to C(5) and C(6) positions of Thy was isolated by a preparative HPLC and identified by a FAB-HRMS. The primary cross-link I was dehydrated by treatment with HCl at 120 degrees C to yield the secondary structure (II) possessing a C(5)-C(6) double bond in the Thy moiety: the latter structure II was reported previously (Dizdaroglu, M.; Gajewski, E. Cancer Res. 1989, 49, 3463-3467). A pulse radiolysis study with a redox titration method indicated that 4-carbon centered Lys radical intermediate was of neutral redox reactivity in contrast to reducing reactivity of 5-hydroxy-5,6-dihydrothymin-6-yl radical intermediate. The cross-link I could be formed by a conventional radical recombination mechanism, but not by an ionic recombination mechanism involving a redox reaction between the radical intermediates.     

Application of three-dimensionally reinforced carbon–carbon composites to dovetail joint structures

In development of an air-turbo-ramjet engine with an expander cycle (ATREX) for a space plane, application of carbon–carbon (C/C) composites plays an important role to achieve high performance. Above all, dovetail joints are one of the key structures to realize the turbine system made of C/C composites. In this study, the feasibility of dovetail joints made of three-dimensionally reinforced C/C composites was investigated. Tensile tests were carried out on simplified dovetail joint models. The shoulder angles of the dovetail joint and fiber volume fractions of the C/C composites were taken as parameters to optimize the shape of the dovetail joint. Finite element analyses were also carried out for various cases. Comparison between the experimental and the calculated results suggests that fracturing of the dovetail joint was controlled by the average shear stress, which implies that the shear stress concentration on the shoulder was relaxed during the fracture process. It was also shown that the dovetail joint made of C/C composites is feasible for use in the ATREX engine.     

Prediction of gas‐liquid two‐phase mixture flow in a vertical pipe with a sudden expansion in diameter

The principle of gas‐lift pumps is applied to vacuum‐decarburization with the RH (Ruhrstahl Heraeus) process to circulate molten steel. Gas‐lift pumps are also applicable to the transportation of molten iron/steel between different refining processes. This paper treats theoretical analysis of steady‐state flow characteristics of gas‐liquid two‐phase mixtures rising in a vertical pipe with an abrupt expansion of its diameter. The system of governing equations is based upon a one‐dimensional multi‐fluid model. Flow pattern transitions are taken into consideration. A new numerical procedure to predict the flow characteristics at the sudden expansion has been proposed. Experiments have also been performed for several conditions to confirm the applicability as well as the validity of the present numerical model. It has been found that the predictions agree reasonably well with the experimental data. Next, the effect of the sudden expansion of pipe diameter on the pump performance was investigated numerically. As a result, it has been confirmed that the sudden expansion of pipe diameter contributes to improve the pump efficiency.     

Preparation of diamond whiskers using Ar/O2 plasma etching

Radio frequency (RF) plasma etching of chemical vapor deposition (CVD) diamond film has been investigated in Ar/O₂ plasmas, with an emphasis to elucidate the effects of reacting gas on the fabrication of diamond whiskers. Diamond whiskers were formed on diamond films pre-coated with Al. It was found that diamond whiskers preferentially formed at the diamond grain boundaries. The densities of diamond whiskers increased with O₂ / Ar ratio. Whiskers obtained in pure O₂ plasma etching were 50 nm in diameter and 1 μm in height. The etching rate was increased by mixing Ar with appropriate volume of O₂. Al coated on the diamond surface reacted with O₂ to form Al₂O₃, serving as mask to restrain the etching underneath. Raman spectroscopy measurement confirmed that the whiskers kept sp³ diamond bonding structure after RF plasma etching. The field emission characteristics of the whiskers were also inspected.     

Effects of ondansetron on electrically evoked contraction in rat stomach fundus: possible involvement of 5-HT2B receptors

The effect of dietary RRR-gamma-tocopherol supplementation on serum and tissue alpha- and gamma-tocopherol concentrations was studied in vitamin-E-deficient rats fed diets containing adequate levels of RRR-alpha-tocopherol and graded levels of RRR-gamma-tocopherol over a 60 day period. Feeding rats with a RRR-alpha-tocopherol-supplemented diet induced in forebrain, sciatic endoneurium, skeletal muscle, heart and liver a marked increase in alpha-tocopherol concentration. In contrast, feeding rats with a diet containing the same level of RRR-gamma-tocopherol induced a small increase in gamma-tocopherol concentrations in brain, sciatic endoneurium, skeletal, muscle, heart and liver and a slight but significant decrease in alpha-tocopherol concentration in all tissues examined. In rats fed diets containing a constant level of RRR-alpha-tocopherol and graded levels of RRR-gamma-tocopherol, the concentrations of alpha-tocopherol in all tissues were much higher than those in rats fed a control diet containing RRR-alpha-tocopherol alone. The higher the gamma/alpha ratio, the more the alpha-tocopherol concentrations increased. Significant positive linear regressions were found between the gamma/alpha ratio and the alpha- and gamma-tocopherol concentrations in most of the tissues examined. These results indicate that when gamma-tocopherol was supplied continuously in the diet gamma-tocopherol accumulated significantly in the tissues but to a much smaller extent than when rats were fed with RRR-alpha-tocopherol. These experiments also indicate that gamma-tocopherol did not depress the serum and tissue alpha-tocopherol concentrations. On the contrary, gamma-tocopherol supplements induced a marked increase in alpha-tocopherol concentrations in the serum and tissues. These results suggest that there is a relationship between alpha- and gamma-tocopherol levels in vivo and that the biopotency of alpha-tocopherol should be reevaluated especially when high levels of gamma-tocopherol were present in the diet.