非电量微机采集系统

实现水电厂电量快速微机巡回检测，温度采集较其它信号更为困难，本文着重讨论温度信号转换及与微机系统的连接。且介绍某水电厂微机控系统中非电量检测装置的硬件结构和软件编制。     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

Mesopore development in PAN-ACF resulting from non-metal additives

The narrow pore-size distribution of activated carbon fibres (ACF) limits their application in the fields concerning larger molecules, such as liquid adsorption and catalyst support. On the addition of carbon particles and organic materials to polyacrylonitrile fibres, and after stabilizing and activating, the mesoporosity in the resultant ACF has been obviously increased. Among these additives, carbon black gives the best effect. With 1 wt% carbon black I in precursor and on activating at 880°C for 30 min, a mesoporosity of 48.2% (total pore volume 0.704 ml g-1, mesopore volume 0.340 ml g-1) has been obtained. The mechanism of mesopore formation is also discussed. This revised version was published online in November 2006 with corrections to the Cover Date.     

注聚采出水分离用动态水力旋流器特性研究

原有的地面工艺和设备已不能满足聚合物驱采出水分离的要求。采用自行研制的动态水力旋流器，在增压与不增压两种工艺流程下，分别进行了流量和转数对分离效率的影响、转数与压力降的关系，以及入口压力与处理量的关系等项试验研究。试验结果表明，与静态水力旋流器相比，动态水力旋流器的分离效率明显提高，一般可提高10％左右；压力损失显著降低，约可减少0．1MPa，足见可在低压下工作，易于实现无泵运行；无泵运行明显比有泵增压运行的分离效率高，但处理量会有所降低。将动态水力旋流器应用于聚合物驱产出水的油－水分离处理是完全可行的。     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。     

直流电动机参数测定

根据直流电机的可逆原理并利用常规的实验仪表，可以简便、准确地测出直流电动机的主要参数－电磁转矩、输出转矩和效率．     

Microfabricated liquid chromatography columns based on collocated monolith support structures

There is great interest today in massively parallel analytical strategies as a way to accelerate the rate of discovery in biological research; among them being 'biochips' and 'laboratories-on-a-chip'. The concept in the 'chip' approach is that minaturization will allow large numbers of operations to be performed in parallel in a small space, as in electronics. Proceeding with the semiconductor analogy, this paper demonstrates that in situ micromachining can be used to simultaneously fabricate millions of micrometer size, particle like structures in multiple liquid chromatography columns on a single wafer. Reduction of this widely used bioanalytical tool to the nanoliter volume, parallel processing, chip format is a significant step toward laboratories-on-a-chip.     

蒙特卡罗方法在空间辐射制冷器理论分析及热设计计算中的应用

介绍了二级抛物面型辐射制冷器的热物理模型及用蒙特卡罗方法数值模拟解决其热流理论和辐射热耦合表面（漫发射、镜反射）辐射热交换的处理方法。     

Abrasive wear of dental composite resins

Abrasive wear is a major problem in the application of dental composite resins. In this study the friction and wear behaviours of two types of dental composites: one containing relatively coarse filler particles and some microfillers (Estilux) and another containing only microfiller particles (Durafill), have been investigated by using a scratch testing machine. Experimental results show that the coefficients of friction in both composites are essentially constant for applied loads up to 20 N. The wear resistance of Durafill is better than Estilux. Under the same testing conditions, the size, shape and distribution of the filler particles are more important variables than applied load and sliding speed in controlling the wear mechanism. It is shown that for Estilux, plastic ploughing by the diamond indenter is the predominant mechanism. For Durafill, however, the formation and propagation of tensile cracks on the worn surface is the main wear mechanism. The effects of two different indenters, diamond and enamel, on the basic wear mechanisms are also discussed.