地下商场的通风与空调设计

地下空间的内部环境优劣是影响人们身心健康的重要指标。作者通过地下商场通风空调施工实践,提出控制地下内部环境与节能所采取的措施,并谈几点粗浅看法,以供设计与运行管理参考。     

Supplementing Holstein cows with low doses of bovine somatotropin prepartum and postpartum reduces calving-related diseases

The objective of this study was to evaluate whether supplementing Holstein cows with bovine somatotropin (bST; 142.8 mg/14 d), beginning at 21 d (±3 d) before expected calving and continuing through 42 d in milk (±3 d), affected the incidence rates of retained fetal membranes (RFM), metritis (MET), clinical mastitis (MAS), digestive problems (DIG), ketosis (KET), milk fever (MF), displaced abomasum (DA, left or right), lameness (LAM), or number of sick cows during the first 60 d in milk. Data for multiparous Holstein cows from 3 separate trials were merged for analyses (n = 437). Cows in the bST-supplemented group (n = 162) received biweekly subcutaneous injections of Posilac, whereas control cows (n = 166) and a group of cohorts (n = 109) were not supplemented. Incidences of disease were collected from the herd health records. Across all treatment groups, the incidence rates (number of diseased cows divided by the total number of cows) for RFM, MET, MAS, DIG, KET, MF, DA, and LAM were 8.47, 18.31, 16.02, 4.35, 4.35, 3.66, 3.20, and 3.66%, respectively. The incidence rates of RFM, MET, MAS, DIG, KET, MF, DA, and LAM for cows in the bST-supplemented, control, and cohort groups were 6.79, 7.83, and 11.93%; 16.05, 7.47, and 22.94%; 10.49, 18.07, and 21.10%; 1.23, 5.42, and 7.34%; 1.23, 6.02, and 6.42%; 2.47, 4.22, and 4.59%; 2.47, 3.61, and 3.67%; and 3.70, 3.61, and 3.67%, respectively. The percentages of sick cows (number of cows having one or more cases of disease divided by the total number of cows) in the bST-supplemented, control, and cohort groups were 33.95, 43.37, and 49.54%, respectively. Significant chi-squared values were detected between the bST-supplemented and control groups for MAS, DIG, and KET, with a greater number of healthy cows in the bST-supplemented group. No differences in incidences of diseases or sick cows were detected between the control and cohort groups. Results indicated that a low dose of bST supplemented to Holstein cows for 3 wk prepartum through 60 d in milk reduced the incidences of some calving-related diseases compared with nonsupplemented controls or cohorts. Importantly, no negative effects of bST supplementation on postpartum calving diseases were detected compared with nonsupplemented cows.     

Experimental Performance of Full-Depth Precast, Prestressed Concrete Overhang, Bridge Deck Panels

The performance of a new full-depth precast overhang panel system for concrete bridge decks is investigated experimentally. In contrast to conventional cast-in-place deck overhangs, the proposed full-depth precast overhang system has the potential to speed up construction, reduce costs, and improve safety. Load-deformation behavior up to factored design load limits is first investigated. The panel is then loaded near its edge to examine the collapse capacity and the associated failure modes—particularly the influence of panel-to-panel connections that exist, transverse to the bridge deck axis. Comparative tests are also conducted with a conventional cast-in-place overhang system. When compared to the conventional cast-in-place overhang behavior, the experimental results show that the precast full-depth overhang introduces different behavior modes, largely due to the influence of the partial depth panel-to-panel connection, which reduces the capacity by some 13%.     

Milk production from Holstein half udders after concurrent thirty- and seventy-day dry periods

The objective of this study was to use a within-cow, half-udder model to compare the effect of cessation of milk removal from mammary quarters within respective half udders at either 30 or 70 d before expected calving date (ECD) on the ability of the half udders to subsequently produce milk. Pregnant Holstein cows were assigned to control (n = 14) or treatment (TRT, n = 26) groups. All mammary quarters in the udder of cows in the control group had 70-d (68 ± 9 d) dry periods, whereas in each cow of the TRT group, 1 randomly selected half udder was dried at 70 d before ECD and the other half udder continued to be milked twice daily until dried at 30 d before ECD. From 80 through 70 d before ECD, amounts of milk produced by the left and right half udders of cows in the TRT group were measured at the first-shift milking. No differences were detected in the actual or relative amounts of milk produced by the left (3.46 ± 0.2 kg; 48.8 ± 1.0%) and the right (3.63 ± 0.2 kg; 51.2 ± 1.0%) half udders. Furthermore, the actual and relative amounts of milk produced by the half udders (n = 12 left, 14 right) subsequently dry for 67 ± 7 d (3.56 ± 0.2 kg; 50.2 ± 1.0%) and the half udders (n = 14 left, 12 right) subsequently dry for 27 ± 7 d (3.54 ± 0.2 kg; 49.8 ± 1.0%) did not differ before they were dried. However, from 3 to 100 d of the subsequent lactation, the 30-d dry half udders produced 18.9% less milk than the 70-d dry half udders (16.3 vs. 20.1 ± 1.0 kg/d). In addition, relative amounts of total-udder milk produced by the 30- and 70-d dry half udders in the same cow differed (44.9 vs. 55.1 ± 0.2%, respectively). Cows in the control group produced more milk than cows in the TRT group through 80 DIM (39.5 vs. 35.2 ± 0.6 kg/d), but not from 3 through 150 DIM (39.0 vs. 36.2 ± 1.6 kg/d). Thus, half udders that produced the same actual and relative amounts of milk before being dried did not do so when given a 30-d dry period instead of a 70-d dry period. When compared with the pre-dry value (49.8%), the relative contribution of half udders dry for 30 d to the total milk yield during the first 100 DIM was decreased by 9.8%.     

Evaluation of heat transfer correlations for HCCI engine modeling

Combustion in HCCI engines is a controlled auto-ignition of well-mixed fuel, air and residual gas. The thermal conditions of the combustion chamber are governed by chemical kinetics strongly coupled with heat transfer from the hot gas to the walls. The heat losses have a critical effect on HCCI ignition timing and burning rate, so it is essential to understand heat transfer process in the combustion chamber in the modeling of HCCI engines. In the present paper, a comparative analysis is performed to investigate the performance of well-known heat transfer correlations in an HCCI engine. The results from the existing correlations are compared with the experimental results obtained in a single-cylinder engine. Significant differences are observed between the heat transfer results obtained by using Woschni, Assanis and Hohenberg correlations.     

Double-Wiebe function: An approach for single-zone HCCI engine modeling

Single-zone Wiebe-function HCCI combustion models tend to over-predict the peak cylinder pressure. The over-prediction arises because it is not possible for the standard Wiebe function to fully match both the slower combustion (i.e. the large spread of autoignition times) that occurs in the cooler boundary regions adjacent to the walls and the faster combustion (small spread of autoignition times) in the hot core. The slower combustion by the wall is commonly modeled with a multi-zone approach. The aim of this work was to improve the ability of a single-zone model to predict cylinder pressure without introducing a separate wall zone. This was accomplished by using, within a single zone, a double-Wiebe function combustion model in which most of the fuel burns as usual but a minor fraction (typically 10–20%) burns at a reduced rate. In the present article, cylinder pressure traces predicted by using both standard and double-Wiebe functions are compared to experimental pressure traces obtained from a Ricardo Hydra HCCI engine. The best agreement with the experiments was obtained by using double-Wiebe function approach.     

定向结构刨花板表面粗糙问题的研究

本文对定向结构刨花板表面粗糙问题从工艺和设备上进行深入的研究 ,通过气流铺装施加表面细化材料以提高板面平整度。研究表明 ,采用细化材料的方法是可行的 ,产品质量达到加拿大国家标准二级板的要求。     

加油站设备的安装

根据多年油库加油站工作的实践经验,提出了加油站油罐管线、设备安装时要注意的问题以及需采取的防雷、防静电措施。     

Effect of wastewater composition on archaeal population diversity

Distribution and occurrence of Archaea and methanogenic activity in a laboratory scale, completely mixed anaerobic reactor treating pharmaceutical wastewaters were investigated and associated with reactor performance. The reactor was initially seeded with anaerobic digester sludge from an alcohol distillery wastewater treatment plant and was subjected to a three step feeding strategy. The feeding procedure involved gradual transition from a glucose containing feed to a solvent stripped pharmaceutical wastewater and then raw pharmaceutical wastewater. During the start-up period, over 90% COD removal efficiency at an organic loading rate (OLR) of 6 kg COD m(-3)d(-1) was achieved with glucose feeding, and acetoclastic methanogenic activity was 336 ml CH4 gTVS(-1)d(-1). At the end of the primary loading, when the feed contained solvent stripped pharmaceutical wastewater at full composition, 71% soluble COD removal efficiency was obtained and acetoclastic methanogenic activity decreased to half of the rate under glucose feed (166 ml CH4 gTVS(-1)d(-1)). At the end of secondary loading with 60% (w/v) raw pharmaceutical wastewater, COD removal dropped to zero and acetoclastic methanogenic activity fell to less than 10 ml CH4 gTVS(-1)d(-1). Throughout the course of the experiment, microbial community structure was monitored by DGGE analysis of 16S rRNA gene fragments. Five different archaeal taxa were identified and the predominant archaeal sequences belonged to methanogenic Archaea. Two of these showed greatest sequence identity with Methanobacterium formicicum and Methanosaeta concilii. The types of Archaea present changed little in response to changing feed composition but the relative contribution of different organisms identified in the archaeal DGGE profiles did change.