Comparative study of self-assembling of multilayers using reactive sputter deposition and mass selective ion beam deposition

While experimenting with the growth of metal-containing amorphous carbon (a-c:Me) thin films using two different growth processes, self-assembled multilayered structures were observed. One of the processes is a reactive magnetron sputter deposition process. The other process is a mass selective ion beam deposition process. Despite of the differences in the growth method and the growth condition, self-assembled multilayered thin films, consisting of alternating dark layer and bright layer, were obtained in both processes. Based on the consideration of energy for atomic diffusion in the thin films, the growth mechanism is discussed.     

Spin-lattice relaxation in ammonium compounds with a complex molecular dynamics

Expressions are derived for the initial relaxation rate 1/T1 of protons and deuterons of nontunnelling NH4 and ND4 groups reorienting about various symmetry axes in solids. The reorientation rates are modified by a trigonal, tetragonal or monoclinic distortion of the predominantly cubic hindering potential. When the rates differ sufficiently from each other, two T1 minima are observed with a characteristic ratio. Experiments were performed in NH4VO3, (NH4)2S2O8, (NH4)2PtCl4, and their deuterated modifications, which all exhibit two T1 minima. In NH4VO3 and ND4VO3 the relaxation and spectral data agree rather well with the model of trigonal distortion. Also (NH4)2S2O8 has a preferred threefold axis but there, the large tunnel splitting of protons has to be taken into account before an agreement is reached. All the purely reorientational models fail with (NH4)2PtCl4, where, instead, the ammonium groups are proposed to be ordered into domains at low temperatures. The groups inside the domains and boundary regions give rise to the high- and low-temperature T1 minima, respectively. The boundaries are also believed to give rise to the narrow component in the deuteron spectrum at low temperatures. Evidence for a proton tunnelling frequency of 32 MHz is found in (NH4)2PtCl4.     

Agrobiodiversität und Pflanzenschutz – ein ambivalentes Verhältnis

No Abstract. .      

Investigation of the stability of tablets prepared from sucrose and citric acid anhydride utilizing response surface methodology

Inversion of sucrose is a stability problem particularly of candies with acidic taste that contain sucrose and small amounts of organic acids such as citric acid, since the free d-fructose produced by hydrolysis is hygroscopic. The following possibilities were investigated for preventing the hydrolysis of sucrose in tablets containing sucrose and citric acid: Adding various amounts of tri-sodium citrate to the formulation to neutralize the citric acid, (Hot) melt coating of citric acid and tri-sodium citrate with a vegetable fat at different coating ratios, variation of the ratio of coated citric acid and tri-sodium citrate in formulations, and compressing the formulations with different compression forces. After tablet processing and storage of tablets, the concentration of d-fructose was determined on the basis of enzymatic reactions. A response surface central composite design was used. The above-mentioned variations were chosen as independent variables and the amount of d-fructose was chosen as response variable. The lowest rates of inversion could be achieved by increasing the content of tri-sodium citrate and the ratio of coating material and decreasing the ratio of coated citric acid and tri-sodium citrate in the tablet formulations. The compression force had no significant effect on the inversion of sucrose.     

Energetics of Plastic Deformation of Metastable Austenitic Stainless Steel

The change in the internal energy during uniaxial tensile deformation of austenitic stainless steels EN 1.4301 (AISI 304) and EN 1.4318 (AISI 301LN) was determined by measuring the extent of γ→α'‐martensite transformation and the temperature increase of the samples. From the results the fraction of the stored energy of cold work and the free energy change related to the strain‐induced γ→α'‐martensite transformation were determined. The fraction of stored energy varied around 0.4. With the metastable steel grades the free energy change related to the γ→α'‐martensite transformation was found to vary between ‐98 MJ/m³ and ‐206 MJ/m³ depending on the austenite stability of the steel. Furthermore, the magnitude of the mechanical driving force was estimated by comparing the results with the free energy change of thermally induced transformation.     

Study on process parameters in metallocene polymerizations,I. Apparent viscosity and macro-scale mass transfer

A heat balance reaction calorimeter was used to obtain information about the most informative process parameters in polymerizations carried out with Et[Ind]₂ZrCl₂-methylaluminoxane catalyst. The viscosity of the reaction mixture was found to increase dramatically during the homopolymerization of ethylene, but it could be controlled through appropriate selection of the reaction mixture medium. The mass transfer between the gas and liquid phases was the rate-determining step for the polymerization when the reaction mixture-based Reynolds number was below 2.500. The limited mass transfer between the gas and liquid phases was caused by the intensive activity of the metallocene catalyst and the increased viscosity of the reaction mixture.     

Productivity and costs of slash bundling in Nordic conditions

The number of slash bundlers and the volume of slash bundling have been rapidly increasing during the last few years in Finland. However, no comprehensive time or follow-up studies have been carried out on slash bundling technology in Finland or in any other country. Metsäteho Oy carried out studies on the productivity and costs of slash bundling in different Nordic recovering conditions. The study methods included both time and follow-up studies. Data were collected during the summer and winter period primarily in Norway spruce (Picea abies L. Karst.) dominated clear cutting sites. The bundling techniques performed by different types of bundler (Fiberpac 370, Timberjack 1490D, Pika RS 2000, Valmet WoodPac) were studied.

The average productivity of slash bundling was 18.1 bundles per operating (E₁₅, including delays shorter than 15 min) hour with the Timberjack 1490D and Fiberpac 370 bundlers in the follow-up study. The operator of the slash bundler had the greatest effect on the productivity of bundling. The prerequisite for increased bundling volumes is a reduction in the costs of the most expensive sub-stage of the bundling supply chain, i.e. bundling itself. This requires improved recovery conditions at bundling sites, increased bundling productivity, larger sized bundles, and the execution of bundling operations in two work shifts using an efficient bundler and effective operator working methods. Implementation of these development measures will bring the bundling supply chain up to a speed that makes it the most competitive supply chain for forest chips in terms of total supply costs for long-distance transportation distances of more than 60 km.