First results of process‐studies to enhance the ductility of ferritic steels containing chromium mass contents of more than 8%

Otherwise their drawback is the tendency towards cold brittleness expressed by their low impact energy values. They obtain the high range of ductility only at termperatures higher than room temperature. It was found that this low ductility at room temperature is caused by a high‐temperature embrittlement besides the well‐known low‐temperature 475°C embrittlement. The high‐temperature embrittlement is provoked by submicroscopic precipitates but can be remedied by a special annealing treatment. The results with enhanced ductility of the ferritic microstructure are confirmed under manufacturing conditions for semifinished products such as slabs, billets, bars, wire rod and strips, depending on alloying contents of mainly chromium and aluminium. In the field of near‐net‐shape casting, first results also confirm the same beneficial effect. Using the heat‐content of the casting and rolling for the annealing process, moreover, results in lower process costs.     

Ionic liquid-based synthesis of luminescent YVO<Subscript>4</Subscript>:Eu and YVO<Subscript>4</Subscript>:Eu@YF<Subscript>3</Subscript> nanocrystals

Luminescent YVO₄:Eu nanocrystals were prepared via an ionic liquid-based synthesis. According to electron microscopy, dynamic light scattering, and X-ray diffraction, the presence of uniform and highly crystalline particles, 12–15 in diameter is validated. As-prepared particles turn out to be nonagglomerated and redispersible. Photoluminescence exhibits characteristic red emission related to Eu³⁺. Quantum yield of as-prepared YVO₄:Eu (15 mol%) is determined to 17–19%. The quantum yield of as-prepared material increases to 44–46% by establishing an YVO₄:Eu@YF₃ core-shell structure. Since the lattice planes (001) of YVO₄ and (100) of YF₃ match very well, a crystalline YF₃ shell, 1–2 nm in thickness protects the YVO₄ core very efficiently. Besides the significantly increased quantum yield, the presence of a core-shell structure is further evidenced by electron energy loss spectroscopy. Element mapping revealed high intensities of Eu in the inner parts, associated with low peripheral fluorine intensities.      

Melamine salts as hardeners for urea formaldehyde resins

Various salts derived from melamine and organic acids were prepared and used as melamine substitutes for melamine urea formaldehyde (MUF) resins. The synthesis of these melamine salts and a detailed characterization of their stoichiometry are described. All salts form 1 : 1 or 1 : 2 stoichiometries in a homogeneous reaction. They crystallize during cooling of the hot and diluted reaction mixture. Both ¹³C–NMR and ¹⁵N–NMR data are reported and point toward the formation of real ionic structures. Most salts have higher water solubility than that of pure melamine and are tested for their ability to substitute melamine in MUF resins. The mechanical and chemical properties of plywood panels made up of traditional MUF resins and mixtures of UF resins with melamine salts are investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1654–1661, 2001     

TTT and CHT curing diagrams of water‐borne polycondensation resins on lignocellulosic substrates

Lignocellulosic substrates such as wood were found to have a marked modifying influence on both lower temperature and higher temperature zones of TTT and CHT diagrams during hardening of phenol–resorcinol–formaldehyde (PRF) and melamime–urea–formaldehyde (MUF) polycondensates. Although the modifying influence of the substrate on the higher temperature zone of CHT diagrams presented the same trend of what was already reported for phenol–formaldehyde (PF) and urea–formaldehyde (UF) polycondensates, marked differences from what reported in the literature were recorded for TTT diagrams of all these polycondensates as well for the lower temperature zones of the CHT diagrams on lignocellulosic substrates, both of which had not been investigated previously. The chemical and physical mechanisms of the interactions of the resins, the substrate, and the water carrier causing such marked variations are presented and discussed. Although in the higher temperature zones both substrate and water carrier play an important role, in the lower temperature zone the presence of water appears to be the dominant factor causing the observed variations. The generalized modified CHT and TTT diagrams characteristic of the behavior of these water‐borne polycondensates on lignocellulosic substrates can be used to describe the behavior and complex changes of phase the formaldehyde‐based polycondensation resins undergo when used as wood adhesives during their curing directly in the wood joint. The results also show that diagrams obtained with pure resin cannot be used to predict the behavior of the polycondensate when this is markedly modified by the presence of interacting solvents and substrates. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2128–2139, 2001     

Generation and Selection of Specific Aptamers Targeting Brucella Species through an Enhanced Cell-SELEX Methodology

Brucellae are Gram-negative, aerobic, non-motile coccobacilli causing brucellosis in man and animals. The disease is one of the most significant yet neglected global zoonoses. Especially in developing countries, brucellosis is causing public health problems and economic losses to private animal owners and national revenues. Composed of oligonucleotides, aptamers are chemical analogues of antibodies that are promising components for developing aptamer-based rapid, sensitive, and specific tests to identify the Brucella group of bacteria. For this purpose, aptamers were generated and selected by an enhanced protocol of cell systematic evolution of ligands by exponential enrichment (cell-SELEX). This enhanced cell-SELEX procedure involved the combination of both conventional and toggle cell-SELEX to boost the specificity and binding affinity to whole Brucella cells. This procedure, combined with high-throughput sequencing of the resulting aptamer pools, comprehensive bioinformatics analysis, and wet lab validation assays, led to the selection of a highly sensitive and specific aptamer for those Brucella species known to circulate in Egypt. The isolated candidate aptamer showed dissociation constant (K_D) values of 43.5 ± 11, 61.5 ± 8, and 56 ± 10.8 nM for B. melitensis, B. abortus, and B. suis, respectively. This is the first development of a Brucella-specific aptamer using an enhanced combination of conventional and toggle cell-SELEX to the authors’ best knowledge.     

Smaller,Stronger, More Stable: Peptide Variants of a SARS-CoV-2 Neutralizing Miniprotein

Based on the structure of a de novo designed miniprotein (LCB1) in complex with the receptor binding domain (RBD) of the SARS-CoV-2 spike protein, we have generated and characterized truncated peptide variants of LCB1, which present only two of the three LCB1 helices, and which fully retained the virus neutralizing potency against different SARS-CoV-2 variants of concern (VOC). This antiviral activity was even 10-fold stronger for a cyclic variant of the two-helix peptides, as compared to the full-length peptide. Furthermore, the proteolytic stability of the cyclic peptide was substantially improved, rendering it a better potential candidate for SARS-CoV-2 therapy. In a more mechanistic approach, the peptides also served as tools to dissect the role of individual mutations in the RBD for the susceptibility of the resulting virus variants to neutralization by the peptides. As the peptides reported here were generated through chemical synthesis, rather than recombinant protein expression, they are amenable to further chemical modification, including the incorporation of a wide range of non-proteinogenic amino acids, with the aim to further stabilize the peptides against proteolytic degradation, as well as to improve the strength, as well the breadth, of their virus neutralizing capacity.     

OLN-93: a new permanent oligodendroglia cell line derived from primary rat brain glial cultures

We have established a new permanent cell line (OLN-93), derived from spontaneously transformed cells in primary rat brain glial cultures. In growth medium supplemented with 10% fetal calf serum a doubling time of 16-18 hr was determined. OLN-93 cells in their antigenic properties resemble primary oligodendrocytes in culture. As analyzed by indirect immunofluorescence, the A2B5 surface marker is absent, they express galactocerebroside and myelin-specific proteins, such as myelin basic protein (MBP), myelin-associated glycoprotein (MAG), proteolipidprotein (PLP), and Wolfgram protein (WP), but do not exhibit astrocytic properties, such as the expression of vimentin or the glial fibrillary acidic protein (GFAP). In their morphological features they resemble bipolar O-2A-progenitor cells and, when grown at low density or on poly-L-lysine-coated culture dishes under low serum conditions, immature oligodendrocytes with a more arborized cell morphology. The cellular processes contain microfilaments, while N-CAM/D2 immunoreactivity is localized on the cell surface of the somata and processes. Immunoblot analysis further confirmed the presence of MAG, WP and MBP immunoreactivity, and the absence of vimentin and GFAP. Only a single MBP isoform (approximately 14 kDa) was detectable in the cellular extracts. PLP mRNA expression was studied by RT-PCR. The two proteolipid-specific mRNAs, DM20 and PLP, were present in OLN-93 cell extracts. Comparisons with embryonic rat cerebral cells in culture and primary oligodendrocytes suggest that OLN-93 cells in their morphological features and their antigenic properties resemble 5- to 10-day-old (postnatal time) cultured rat brain oligodendrocytes. Thus, the new cell line described in this study should provide a useful model system to investigate the specific mechanisms regulating the proliferation and differentiation of oligodendrocytes in vitro, and the molecular interactions with other cells of the nervous system.     

Erfahrungen mit der Auswaschung von Kartoffelreibsel ohne Wasserzusatz

Experience in Potato Pulp Washing without Water Addition. In order to reduce the quantity of waste water from potato starch factories many have tried to keep the amount of water, required for washing out the starch from the pulp as low as possible. Our process is based on utilization of the water contained in the potatoes (approx. 80%, including soluble components) for starch extraction, in such a way that undiluted fruit water is separated and further treatment can be carried out in a comparatively economical way. Most of today's starch factories are tied up with production methods that make it impossible to utilize the water contained in the potatoes, as there is firstly no possibility of recirculating the fruit water and secondly there are foaming problems causing a negative effect on the efficiency. A continuous process guaranteeing a direct flow, excluding accumulation of foam, was installed and tested in both a Swedish and in a Dutch factory. The experience obtained showed that starch extraction with fruit water has no negative influence on the efficiency of the extraction (approx. 1 % free starch in the pulp DS/DS) and that up to 80% of the fruit water could be removed in a concentrated form. By extending the extraction process, and by using 300 l of process water from the refining section per ton of potatoes, separation of the fruit water can be increased up to 97%.     

On the Impact of Linear Siloxanated Side Chains on the Molecular Self-Assembling and Charge Transport Properties of Conjugated Polymers

Herein reported is the impact of the functionalization of four different semiconducting polymer structures by a linear siloxane-terminated side-chains. The latter is tetrasiloxane (Si₄) or trisiloxane (Si₃) chains, substituted at their extremity to a pentylene linker. The polymer structure is based on 5,6-difluorobenzothiadiazole comonomer (PF2), a diketopyrrolopyrrole unit (PDPP-TT), a naphtalediimide unit (PNDI-T₂), and a poly[bis(thiophen-2-yl)thieno[3,2,b]thiophene (PBTTT). The properties of these siloxane-functionalized polymers are scrutinized and compared with the ones of their alkyl-substituted polymer analogues. The impact of the alkyl-to-siloxane chain substitution clearly depends on the molecular section of the side chains. When a branched 2-octyldodecyl chain (C₂₀) is replaced by a Si₄ chain of same molecular section, the greatest impact is the strong increase of the π-stacking overlap of the polymer backbones. This effect leads to a significative enhancement of the charge mobility values of the polymers. As in-plane and out-of-plane mobility are increased simultaneously, this π-overlap enhancement effect happens to be preponderant over the polymer orientation variations. When a linear tetradecyl chain (C₁₄) is replaced by a linear Si₃ chain of twice larger molecular section, the polymer structure is profoundly affected. While PBTTT-C₁₄ is crystalline and purely edge-on, PBTTT-Si₃ is mesomorphic and shows a mixed face-on/edge-on orientation.