AC hot-carrier effects in MOSFETs with furnaceN2O-nitrided gate oxides

AC hot-carrier effects in n-MOSFETs with thin (~85 Å) N₂O-nitrided gate oxides have been studied and compared with control devices with gate oxides grown in O₂. Results show that furnace N₂O-nitrided oxide devices exhibit significantly reduced AC-stress-induced degradation. In addition, they show weaker dependences of device degradation on applied gate pulse frequency and pulse width. Results suggest that the improved AC-hot-carrier immunity of the N₂O-nitrided oxide device may be due to the significantly suppressed interface state generation and neutral electron trap generation during stressing     

Untersuchung des einflusses molekularer parameter auf morphologie und eigenschaften von polyethylenen niedriger dichte

Based on the example of PE-LD grades and on model substances obtained by preparative fractionation (fractions in the molecular weight range M?_w = 1.2 ? 390·10⁴ g/mol), comprehensive investigations regarding the problems of structure/properties have been carried out. The correlations of M?_w with 15 physical and application technological perameters have been investigated taking into account the reaction mechanism during the manufacturing of PE-LD in the tubular and agitated autoclave reactor, resulting in the formation of so-called primary structure perameters M?_n, M?_w, molar mass distribution, short chain branching and long chain branching. For the interpretation of the results, among other factors, also the morphological conditions have been taken into consideration, which in connection with the molecular parameters reveal — for specific M?_w-ranges — strong changes and saturation ranges, resp., for the physical and application technological properties.     

The oxidation and self-heating of metal sulphides as an electrochemical corrosion phenomenon

Experiments with a representative number of technically interesting metal sulphides trace out hydrogen peroxide as the reactive intermediate of sulphide oxidation. It is formed through an electrochemical reduction of molecular oxygen. The formation of sulphur or sulphate as the final state of oxidation is determined by consecutive reactions which are critically dependent on the catalytical properties of the surface and the solution for hydrogen peroxide decomposition. The individual steps of the reaction are discussed in some detail. Conclusions with respect to a possible control of the autogeneous heating are drawn.     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

Correct pretreatment-the first step to quality in modern textile processing

Cotton continues to be a very widely used natural fibre. However, it becomes ever more difficult to define it exactly in chemical terms, because the variety and quantity of non-cellulosic constituents in the raw cotton are continually increasing in number and becoming more difficult to specify. The textile processor can only count on 75%, or at best 80%, being genuine cellulosic material; the remainder consists mainly of impurities that can seriously interfere with subsequent processes. Modem pretreatment processes take full account of the specific quality requirements, and naturally also the relevant cost factors (energy, effluent, processing costs). By these means the bleacher can now convert raw cotton into a chemically uniform and defined cellulosic textile substrate for the subsequent processes. In this form, either alone or in blends with synthetic fibres, it is accessible for dyeing, printing and finishing processes that can be readily controlled and reproduced.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.