Oxide ceramic fibers via dry spinning process—From lab to fab

Oxide fibers preparation and manufacturing capabilities at Fraunhofer-Center HTL are introduced, showing the development and preparation of oxide ceramic fibers from lab scale to pilot scale up to near production scale. As a specific example, the development of an aluminosilicate fiber with mullite composition is discussed in more detail. Fiber development started from nonaqueous sol-gel precursors in the early lab scale. With increasing fiber spinning volume, precursors were switched to water-soluble systems. Transformation from green fiber to ceramic fiber was monitored by thermogravimetric and differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The evolution of ceramic phases, microstructure formation, and the effects on tensile strength and Young's modulus were investigated. Weibull statistics and fracture analysis helped to understand the results. Next step will be the transition from large lab scale to pilot scale, demonstrating manufacturing capability.     

L?slichkeit und gel-elektrophoretische Muster hitzedenaturierter Proteine, auch von st?rkehaltigen Proben, nach Einwirkung von Na-dodecylsulfat (SDS)

Zusammenfassung Das Lösungsvermögen des Anionendetergents Na-dodecylsulfat (SDS) in Gegenwart disulfidbrückenspaltender Reagentien auf native und auf hitzedenaturierte Proteine wird an Fleisch-und Kartoffelproteinen mit Hilfe elektrophoretischer Methoden untersucht. Die zur Resolubilisierung notwendige Menge an SDS und die erforderliche Incubationszeit werden für die verschiedenen Proben ermittelt. Die Proteine des Skeletmuskels von Rind, Schwein, Huhn und Pute einerseits und die Proteine der europäischen Kartoffelsorten und der südamerikanischen Primitivkultivare andererseits zeigen in der SDS-PAGE ein sehr ähnliches Bandenmuster, das speziesdifferenzierend kaum ausgewertet werden kann, aber ein gutes Charakteristikum für Muskel-bzw. Kartoffelproteine ist.

---

Solubility and electrophoretic patterns of heat-denaturated proteins (including samples containing starch) after treatment with SDS (sodiumdodecylsulfat)

Summary The ability of the anionic detergent SDS (sodium-dodecylsulfate) to solubilize native and heat-denaturated proteins of meat and potatoes in presence of disulphide reducing agents was checked by electrophoretic methods. Skeletal muscle proteins of beef, pork, chicken and turkey have shown very similar patterns in SDS-gelelectrophoresis, which could hardly be used for species identification but they are characteristic for fresh or boiled muscles. Proteins of European potato cultivars and primitive cultivars from South America have almost identical SDS-patterns even if taken from boiled potatoes. Their patterns are different from the proteins of other European crops plants and may serve for detection of the presence of potatoes in food mixtures.

---

---

Diese Arbeit ist Teil der Dissertation von I. de Wreede. Die Analyse der tierischen Proteine bearbeitete I. de Wreede.Sonderdruckanfragen an: I. de Wreede (Adresse siehe oben)     

Finite‐Element Implementation of a Self‐consistent Texture Model with a Hardening Law Based on Dislocation Densities

A self‐consistent texture model is implemented in the finite‐element code ABAQUS/Explicit®. Hardening of the slip systems is described by evolution laws for dislocation densities, and the Bauschinger effect is included. With these ingredients the cold rolling of an IF‐steel is simulated and the evolution of texture and anisotropy is examined. The use of the dislocation based hardening law is found to have a significant effect on the evolution of the anisotropic yield surface, but only very little influence on the texture. Furthermore, the hardening model is used to investigate the evolution of dislocation densities in differently oriented grains during plane strain compression. It is found that the dislocation density varies greatly depending on orientation, an observation which can help to explain the orientation dependence of recrystallization.     

Combining Acoustic Emission and Vibration Technologies Harbors Huge Potential for Material Characterization

The demand for raw materials is growing worldwide, in step with increasing world population and rising living standards of emerging countries. It is becoming more difficult to exploit primary raw materials because of declining ore grades and increasingly complicated mineralogies. Thus, the efficient and environmentally sustainable exploitation of primary resources using innovative technologies has emerged as an important research field to address these issues. An innovative approach is introduced to optimize process and quality control by combining acoustic emission (AE) and vibration technology. The general feasibility of these two technologies for material recognition and characterization is examined. The new approach was tested to determine whether coal could be distinguished from waste rock.     

Evaluation of pathways for washing soluble solids

Filter cake washing is a purification method for particulate products in liquids. This process is mostly one step of a sequence in a solid–liquid separation process. For soluble products not only the mechanical transport mechanisms in washing but also the dissolution process of the product must be considered in order to describe the washing process appropriately. An unconsidered dissolution may cause problems and often severe product loss depending on the material properties. This paper presents several methods of soluble solids washing including filter cake washing by pressure and centrifugal forces as well as moving bed washing. The advantages and drawbacks of each method are discussed to evaluate the suitability of its technical application.     

Processing of dispersions containing fine particles or biological products in tubular bowl centrifuges

The demand for instruments that are suitable for the separation of fine particles and biological cells is steadily increasing. Various innovative particles have already implemented in bulk products and many others are close to commercial availability. Tubular bowl centrifuges offer high centrifugal forces at reasonable throughputs. There is a high potential for the optimisation of existing processes and in the design of new tubular centrifuges especially for the separation of nanoscale materials. The separation of fine particulates and biological cells in a semibatch tubular bowl centrifuge at high rotational speeds is described in this work. Furthermore, the influence of the sediment on the process outcome and possibilities to enhance the separation efficiency were investigated. A boundary layer flow was indirectly detected. Structures inside the rotor of the centrifuge cause defined liquid flow patterns, which influence the separation efficiency. A comparison of the separation behaviour with an unimpaired flow and the redirected flow yielded conclusions about the actual flow patterns.     

Gold nanoparticle-based biosensors

The unique properties of gold nanoparticles have stimulated the increasing interest in the application of GNPs in interfacing biological recognition events with signal transduction and in designing biosensing devices exhibiting novel functions. The optical properties of GNPs provide wide range opportunities for construction optical biosensors. The excellent biocompatibility, conductivity, catalytic properties and high surface-to-volume ratio and high density of GNPs facilitate extensive application of GNPs in construction of electrochemical and piezoelectric biosensors with enhanced analytical performance with respect to other biosensor designs. In this article, the recent advances in construction of GNP-based optical, electrochemical and piezoelectric biosensors are reviewed, and some illustrative examples given, with a focus on the roles GNPs play in the biosensing process and the mechanism of GNPs for improving the analytical performances. Finally, the review concludes with an outline of present and future research for the real-world applications.     

Finite element analysis of a polymer composite subjected to a sliding steel asperity Part I Normal fibre orientation

FE micro-models have been developed in order to determine contact, stress and strain conditions produced by a steel asperity sliding on the surface of a normally oriented fibre-reinforced polymer composite. A displacement coupling technique was introduced to model a micro-environment as part of a macro-environment and to get more realistic simulation results about the failure conditions in the composite structure, in comparison to the so far widely applied anisotropic analytical or numerical macro-models. On the basis of the results, conclusions may be drawn for the possible wear mechanisms of the fibre-reinforced polymer composite. Stress results in the vicinity of the fibers in the contact area show high shear loading of the matrix leading to the formation of stretched-out matrix wear debris. In addition, high repeated compression-tension stresses at the fibre/matrix interface near the surface can lead to fibre debonding phenomena. Considering the fibre ends in the contact region, high compression stresses at their rear edges can produce fibre cracking features. To study the wear mechanisms experimentally, a single asperity scratch test was also performed showing shear failure events of the polymer matrix, fibre/matrix debonding and fibre cracking effects, as expected from the modelling studies.