Effect of autoclaving on dietary fibre content of beetroot (Beta vulgaris). Evaluation by different methods

Modifications of dietary fibre in beetroot during autoclaving have been evaluated by different methods: acid detergent (raw=1.45%; processed=1.17%) and neutral detergent (raw=2.30%; processed=2.00%), the enzymatic-gravimetric method of Asp (raw=3.35%; processed=3.34%), HPLC (raw=1.42%; processed=1.60%) and 3,5-dimethylphenol (raw=0.36; processed=0.28%). The correlation between different methodologies was studied. Autoclaving was carried out at 121°C under pressure for 15 min. Variance analysis indicated that quantitative variations originating in the thermic treatment were not statistically significant (P>0.05).     

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

Optimization of wire connections design for power electronics

In automotive power electronics, low cost and reliability requirements both demand to optimize each part of the package in order to increase its life time during use. The wire bonding breakage accounts for one of the most common failures observed on power modules. In particular, the heel crack mechanism, mainly due to Joule self-heating, can occur in the module, leading to its death. Thus, the wire geometry design has to be set up to maximize its endurance. This paper presents an analytical method able to predict the optimal wire length regarding a wire displacement criterion. Finally, comparisons between experimental results and predictions of the analytical model are given.     

Cyberbullying,cyber aggression and their impact on the victim – The teacher

This paper focuses on the results of the national research of cyberbullying of Czech teachers, which was realized in year 2016 in the entire Czech Republic. The research focused on impact of cyberbullying on teachers – especially in emotional, physiological and behavioural area. The research involved a total of 5136 primary and secondary school teachers from all regions of the Czech Republic. The research has shown that a fifth of respondents (21.73%) has experienced a cyber-attack on their person, however cyberbullying during the last 12 months lasting over 1 week was confirmed only by 3.52% of the total number of respondents.     

Process modeling and simulation for Hg1-xCdxTe. Part II: Self-diffusion,interdiffusion, and fundamental mechanisms of point-defect interactions in Hg1-xCdxTe

The Hg_0.8Cd_0.2Te type-conversion, Hg self-diffusion and interdiffusion processes are analyzed in the context of a first order reaction kinetics approach. Sets of nonlinear, stiffly coupled continuity equations are presented which describe the underlying physics, and their solutions model the observed macroscopic behavior. It is demonstrated that the Frenkel pair mechanism interactions dominated by the cation sublattice, in conjunction with basic diffusive and drift properties of the ionized point defects, comprise the basic processes which effect all macroscopic phenomena discussed. Existing experimental results are reviewed and apparent discrepancies discussed. Use is made of the Stanford University mercury cadmium telluride process simulator to provide quantitative and insightful examples of important results.     

Dispersion characteristics of asymmetric coupled anisotropic dielectric waveguides using FDFD

The formulation is developed in the frequency domain and the finite difference method is used for the numerical solution of the scalar wave equation, written in terms of the transverse components of the magnetic field. As a result a conventional eigenvalue problem is obtained without the presence of spurious modes due to the implicit inclusion of the divergence of the magnetic field equal to zero. The formulation is developed to include biaxial anisotropic dielectrics with an index profile varying arbitrarily in the cross section of the waveguide under analysis. This formulation is then applied to the analysis of the influence on the dispersion characteristics of the dimensions of asymmetric coupled rectangular uniaxial anisotropic dielectric waveguides. As expected, the reduction of the height or the width of one of the rectangular dielectric waveguides causes the dispersion curves to move towards higher frequencies.     

Transformation champ proche — champ lointain bidimensionnelle et monodimensionnelle appliquée à des mesures de SER

In high frequency thercs measurement of large target must be done at important distances, so the distance of measurement (Fraunhofer’s distance) R is given by R ≥ 2d² /λ where d is the tranversal length of the target and λ the radiation wavelength. In this paper we present a method for target that are large relative to the curvature of the spherical wavefront and the curvature of the cylindrical wavefront. A two-dimensional analytical algorithm transforms the spherical wave (near-field) measurement into the desired plane wave (far-field) and a one-dimensionnal analytical algorithm transforms the cylindrical wave (near-field) measurement into the desired plane wave (far-field). We present some results on simulations and measurements. A comparison of one-dimensional and two-dimensional methods demonstrates the efficiency of the two dimensional methods.     

Micro-emboli detection: an ultrasound Doppler signal processing viewpoint

Several studies have been carried out in the last twenty years on the characterization and detection of cerebral artery emboli. From the detection point of view, the existing methods are largely based on the classical Fourier analysis of which the well known limitations provide poor accuracy. This paper first recalls existing methods based on Fourier, Wigner-Ville and wavelet approaches. It then presents new emboli detection methods based on parametric signal processing approaches. The basic idea of these parametric methods is to compare the Doppler embolic signal to its autoregressive model. The detection principle consists in constructing a decision information which contains the signature of the micro-embolus being sought. The detection is finally evaluated using receiver operating characteristic (ROC) curves. Comparison between the new methods and classical approaches is performed using a realistic embolic signal simulation. Furthermore, to validate our theoretical study, we tested our new algorithms using in vivo signals. This comparison shows the significant inaccuracy of existing methods to detect micro-emboli.