Effects of supercritical carbon dioxide treatment on the morphology of poly(l‐lactide)

Synthetic l ‐lactide random copolymers can be employed as controlled release materials when prepared using supercritical carbon dioxide (scCO₂), since they are biodegradable via hydrolysis. To determine the effects of thermal properties on polymer performance following scCO₂ processing, three types of poly(l ‐lactide) having different properties were assessed. The T_m of one poly(l ‐lactide) sample (H‐100) was found to be approximately 170 °C over the processing pressure range from 8 to 18 MPa, while a second sample (H‐440) also showed a constant value of approximately 152 °C. In contrast, the poly(l ‐lactide) REVODE exhibited a T_m of 146 °C prior to processing but a higher value of 147 °C following treatment at 8 MPa. Unlike the H‐100 and H‐440, the T_m value of the REVODE tended to decrease with increasing pressure. The T_g values increased greatly under mild conditions of 8 MPa pressure and a temperature of 40 °C. In particular, the T_g values for the H‐440 and REVODE increased by 4 °C and 5 °C, respectively. All T_g values were lowest at 12 MPa and increased with increasing processing pressure, although the effect of processing temperature was minimal. The Χ_{c DSC} of the H‐100 was 18% initially but increased to 20% upon scCO₂ processing at 40 °C and 14 MPa, and showed further increases at higher processing temperatures. Although the relationship between processing temperature and Χ_{c DSC} values for the H‐440 showed the same trend as observed with the H‐100, a different trend was seen for the REVODE. The Χ_{c XRD} values obtained from the XRD analyses differed from the values generated by DSC analysis, and showed a maximum degree of crystallinity following processing at 80 °C both with and without scCO₂ treatment. ATR FT‐IR analyses identified peaks due to semicrystalline regions in poly(l ‐lactide) samples treated with scCO₂, even when applying low temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44006.     

Dielectric Dispersion of Polycrystalline Aluminum Nitride at Microwave Frequencies

Complex permittivity of polycrystalline AlN was measured over the frequency range 100 MHz to 13 GHz using reflection coefficient and cavity resonator methods. Dielectric relaxation peaks of loss tangent were observed in the frequency range 200 MHz to 3 GHz. The maximum value of loss tangent was ∼200 × 10⁻⁴. Relative permittivities decreased by ∼4% with increased frequency at the region of relaxation peaks. It was shown that these dispersion frequencies were inversely proportional to the grain sizes of AlN and independent of purities and processes. Model calculations for elastic vibration of a single-crystal grain of AlN were performed to investigate the origin of the dielectric dispersion due to piezoelectric effect. The calculated results of elastic sphere and 14-faced-polyhedron models showed a good quantitative agreement with the observed dispersion frequencies, which suggested that the dispersion was due to a piezoelectric vibration of a single grain of AlN ceramics at microwave frequencies.     

Albumin stabilizes (–)‐epigallocatechin gallate in human serum: Binding capacity and antioxidant property

(–)‐Epigallocatechin gallate (EGCg) is the major component of green tea and is known to show strong biological activity, although it can be easily oxidized under physiological conditions. In this study, we indicate that EGCg is stable in human serum and that human serum albumin (HSA) stabilizes EGCg under aerobic condition. Although EGCg is usually decomposed within 1 h in aqueous solution at neutral pH, EGCg in serum and phosphate buffer (pH 7.4) containing HSA was stable over 1 h, even at neutral and slightly alkaline pH. Under these conditions, EGCg binds to HSA non‐covalently. The sulfhydryl group acts as an antioxidant for EGCg oxidation. Incubation of EGCg with HSA is accompanied by the oxidation of a free sulfhydryl group in HSA. These results suggest that the antioxidant property and the binding capacity of HSA contribute to the stabilization of EGCg in human serum.     

A 215 MVA Flywheel Motor-Generator with 4 GJ Discharge Energy for JT-60 Toroidal Field Coil Power Supply System

A 215 MVA flywheel motor-generator is used for the toroidal field coil power supply system of the energy breakeven plasma testing facility, JT-60, which started operations in April, 1985 at JAPAN ATOMIC ENERGY RESEARCH INSTITUTE. This paper describes an outline of the flywheel motor-generator and discusses the determination of the Xd' value which affects the voltage regulation characteristic of the motor-generator and the twenty-four pulse rectifier circuit, the compensation effect of AVR for the voltage regulation characteristic, the temperature rise and stress of the flywheel which is the largest one in the world and the torsional vibration caused by a thyristor starter, together with the results of field tests.     

Abnormal myelination in a patient with ring chromosome 18

BACKGROUND: Most adult anatomical texts state that the deep inguinal ring is situated midway between the anterior superior iliac spine and the pubic tubercle. The aim of this study was to determine if this was true in prepubescent children. METHODS: A total of 107 inguinal ligaments and canals were measured during inguinal operations in 80 children (68 boys, age range 1-118 months). RESULTS: The length of the inguinal ligament increased from a median of 4.3 cm (range 3.6-6.8) at less than 1 year of age to 7.5 cm (range 6.7-10.1) at over 4 years of age. The internal ring was situated medial to the midpoint of the inguinal ligament throughout childhood. The ratio of internal ring to public tubercle over inguinal ligament length was 42% (range 27-58) at less than 2 years; and 34% (range 25-46) at over 4 years. The inguinal canal remained short (median 1 cm (range 0.7-1.1) at less than 2 years, and median 1.1 cm (range 0.7-2.3) at over 4 years) suggesting that growth of the inguinal region in this age group occurs outside the canal. CONCLUSIONS: These results have implications for the siting of incisions, and question the necessity of opening the inguinal canal in children.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry