High Resistance of Cu–Ferrierite to Coke Formation During NH3-SCR in the Presence of n-Decane

Selective catalytic reduction of NO _x by NH₃ over Cu–FER and Cu–ZSM-5 in the presence of n-decane and SO₂ was investigated. NO _x conversion over Cu–ZSM-5 decreased in the presence of n-decane, owing to inhibition of the active sites by coke formation. In contrast, coke formation was negligible over Cu–FER, which maintained its NO _x conversion activity even in the presence of decane. Coke formation was negligible over H–ZSM-5 and H–FER supports, which suggests that Cu species were involved in coke formation. Temperature-programmed reduction by H₂ and electron spin resonance spectroscopy indicated that [Cu–O–Cu]²⁺ was probably the Cu species involved in coke formation over Cu–ZSM-5.     

Catalytic Performance of Aged Rh/CeO2–ZrO2 for NO–C3H6–O2 Reaction Under a Stoichiometric Condition

The activity of Rh/CeO₂ for NO reduction by C₃H₆ was gradually deceased by mixing with ZrO₂ until 68 mol%. Rh supported on CeO₂–ZrO₂ with higher OSC was found to show lower catalytic activity. High OSC of CeO₂–ZrO₂ would probably stabilize the surface of Rh in oxidized state, resulting in low activity and low efficiency of C₃H₆ utilization for NO reduction. In situ FT-IR spectroscopy suggested that mononitrosyl species such as Rh(NO)^δ? and Rh(NO)^δ+ are reaction intermediates in the NO–C₃H₆–O₂ reaction over Rh/CeO₂–ZrO₂ catalysts.     

A Multiple‐Labeling Strategy for Nonribosomal Peptide Synthetases Using Active‐Site‐Directed Proteomic Probes for Adenylation Domains

Genetic approaches have greatly contributed to our understanding of nonribosomal peptide biosynthetic machinery; however, proteomic investigations are limited. Here, we developed a highly sensitive detection strategy for multidomain nonribosomal peptide synthetases (NRPSs) by using a multiple‐labeling technique with active‐site‐directed probes for adenylation domains. When applied to gramicidin S‐producing and ‐nonproducing strains of Aneurinibacillus migulanus (DSM 5759 and DSM 2895, respectively), the multiple technique sensitively detected an active multidomain NRPS (GrsB) in lysates obtained from the organisms. This functional proteomics method revealed an unknown inactive precursor (or other inactive form) of GrsB in the nonproducing strain. This method provides a new option for the direct detection, functional analysis, and high‐resolution identification of low‐abundance active NRPS enzymes in native proteomic environments.     

Relationship Between Structure and Coordination Strength of N and N,O-Hybrid Donor Ligands with Trivalent Lanthanides

ABSTRACT

To effectively separate lanthanides (Ln(III)) from actinides (An(III)), symmetrical 2,2′-bipyridyl (Bpy), 1,10-phenanthroline (Phen), and unsymmetrical N-methyl-N-tolyl-1,10-phenanthroline-2-carboxamide (MeTol-PTA) were investigated. According to the crystal structures and EXAFS experiments, the decreasing ionic radius from light to heavy Ln led to decreases in the Ln–N (Bpy) and Ln–N (Phen) distances, while log β simply increased due to the electrostatic interaction and the order of Ln–O (MeTol-PTA) < Ln–N (Bpy, Phen) < Ln–N (MeTol-PTA) was obtained. This indicated that the bulky phenanthroline moiety of MeTol-PTA may not allow N (MeTol-PTA) to come close to Ln. Consequently, the log β of MeTol-PTA exhibited a local maximum (around Nd).     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003     

An active low-pass filter using two capacitive double-layer uniformly distributed RC lines

In this paper we propose an active circuit consisting of two capacitive double-layer uniformly distributed RC lines and an operational amplifier, and present conditions under which the circuit works as the low-pass filter. Furthermore, we present a method for designing the low-pass filter and give a design example where simulation results are included.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.     

Ionic liquid enables simple and rapid sample preparation of human culturing cells for scanning electron microscope analysis

Ionic liquid is a kind of salt that stays in a molten state even at room temperature. It does not vaporize at all in vacuum and facilitates electrical conductivity to the sample surfaces for observations with a scanning electron microscope (SEM). In this study, we used an ionic liquid in SEM for the first time to observe fixed human culture cells. The condition for the cell culture using wrapping sheets and SEM settings were varied to elucidate the optimized protocol. Compared to samples prepared by the conventional way, the ionic liquid‐treatment of samples gave SEM images of the cellular ultra structures in more detail, enabling observation of microvilli that made bridges between separated cells. In addition, the ionic liquid treatment is less time consuming as well as less laborious compared with the conventional way that includes dehydration, drying, and conductivity treatments. Totally, we concluded the ionic liquid is a useful reagent for SEM sample preparation. Microsc. Res. Tech., 2011. © 2010 Wiley‐Liss, Inc.