An undulator with a composite magnetic field

A new type of undulator greatly improved in tunability as compared with a usual undulator, is proposed. The undulator has a composite magnetic field which is a linear superposition of two sinusoidally varying fields with different spatial periods. The wavelength can be changed by varying the field strength of the longer-period component while keeping that of the shorter-period component at the highest possible value. Numerical calculations of the spectral brightness were carried out. The proper ratios between the two spatial periods were found to be 3:1, 5:1 and 7:1.     

Approximate method of estimating seismic performance of high‐rise buildings with oil‐dampers

When subjected to long‐period ground motions, many existing high‐rise buildings constructed on plains with soft, deep sediment layers experience severe lateral deflection, caused by the resonance between the long‐period natural frequency of the building and the long‐period ground motions, even if they are far from the epicenter. This was the case for a number of buildings in Tokyo, Nagoya, and Osaka affected by the ground motions produced by the 2011 off the Pacific coast of Tohoku earthquake in Japan. Oil‐dampers are commonly used to improve the seismic performance of existing high‐rise buildings subjected to long‐period ground motion. This paper proposes a simple but accurate analytical method of predicting the seismic performance of high‐rise buildings retrofitted with oil‐dampers installed inside and/or outside of the frames. The method extends the authors' previous one‐dimensional theory to a more general method that is applicable to buildings with internal and external oil‐dampers installed in an arbitrary story. The accuracy of the proposed method is demonstrated through numerical calculations using a model of a high‐rise building with and without internal and external oil‐dampers. The proposed method is effective in the preliminary stages of improving the seismic performance of high‐rise buildings.     

Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.     

Batch foam separation of a soluble protein

Removal of protein dissolved in water by batch foam separation was conducted with using ovalbumin (OA) as a model protein in the light of wastewater treatment reducing organic loading. The removal efficiency had a maximum value near the i.e.p. of OA (pH 4.6); thus, most experiments were conducted at pH 4.6. Typical experimental conditions; superficial gas velocity, U(g): 1.97 x 10(-2)-5.37 x 10(-2)cm/s; initial bulk concentration of OA, C(i): ca. 0.05-0.25 g/L; liquid volume, V: 600 cm(3). A model estimating bulk concentration profile was proposed by taking into account a mass balance of the present system. The model predicted that OA could be removed perfectly, however, was not all removed experimentally. The residual OA concentration of the bulk liquid within the column reached plateau value, which correspond to ca. 18% of the initial OA concentration. The plateau value of the bulk concentration was attained for ca. 100-500 min with U(g)=1.97 x 10(-2)-5.37 x 10(-2)cm/s. Foaming ability test revealed that the foaming limit concentration of OA at pH 4.6 was 9.72 x 10(-3)g/L. These results suggested that OA molecules could be damaged by interaction of bubble surface in the dispersed phase, since there were the residual OA concentrations over the limit concentration. To take account of this phenomena and correct the model, average surface density, X(d), which should convert protein molecule into the denatured protein molecule, was introduced. The corrected model could explain well the time profile of OA bulk concentration.     

Development of a fed-batch culture process for enhanced production of recombinant human antithrombin by Chinese hamster ovary cells

Antithrombin is a serine protease inhibitor that inactivates several coagulation proteases, primarily thrombin and factor Xa. The Chinese hamster ovary (CHO) cell line transfected with a vector expressing recombinant human antithrombin (rAT) and a selectable marker, glutamine synthetase (GS), was cultivated in a 2-l fed-batch culture process using serum-free, glutamine-free medium. To maximize the rAT yield, effects of culture pH, balanced amino acid feeding, and an increased glutamate concentration on cell metabolism and rAT production were investigated. When cells were grown at pH values of 6.6, 6.8, 7.0, and 7.2, the maximum cell density and maximum lactate concentration decreased with decreasing pH. The highest production level of rAT was obtained at culture pH 6.8 due to the extended culture lifetime. Compared to the imbalanced amino acid feeding at culture pH 6.8, the balanced amino acid feeding increased the amount of rAT activity by 30% as a result of an increased viable cell number. A decrease in the specific glucose consumption rate (q(Glc)) with increasing culture time was observed in all the above-mentioned experiments, while the glucose concentration was maintained above 0.7 g l(-1). In addition, a decrease in the specific rAT production rate (q(rAT)) was observed after the depletion of lactate in the late cultivation stage. Taken together, these results suggest that the reduced availability of cellular energy caused by the decrease in q(Glc) and depletion of lactate led to the decrease in q(rAT). This decrease in q(rAT) was partially prevented by increasing the residual glutamate concentration from 1 mM to 7 mM, thus resulting in an additional 30% increase in the amount of rAT activity. The optimized fed-batch culture process yielded 1.0 g l(-1) rAT at 287 h of cultivation.     

Acetylation of loofa (Luffa cylindrica) sponge as immobilization carrier for bioprocesses involving cellulase

The feasibility of using loofa sponge for immobilization of cellulase-producing microorganisms was investigated by acetylating loofa sponge. Acetylation was achieved by autoclaving process of loofa sponge immersed in acetic anhydride at various temperatures for various times. The degree of acetylation, as inferred by the weight percentage gain (WPG), was enhanced by increasing both temperature and the duration of acetylation. The acetylation of a piece of loofa sponge in an autoclave at 120 degrees C for 20 min resulted in a WPG of about 8%, which was sufficient to protect the loofa sponge against cellulose degradation. The acetylated loofa sponge prepared under this condition was not decomposed by commercial cellulase and its structure was maintained for more than 720 h during repeated-batch treatments with commercial cellulase. A flocculating yeast (Saccharomyces cerevisiae IR-2) and a fungus (Trichoderma reesei QM9414) were successfully immobilized in the acetylated loofa sponge. In each case, the percentage of immobilized cells was as high as that obtained using nonacetylated loofa sponge. Acetylation had no adverse effects on cell growth and immobilization of T. reesei QM9414, as well as on cell growth and ethanol production by S. cerevisiae IR-2. T. reesei QM9414 immobilized on an acetylated loofa sponge was successfully used for repeated-batch cellulase production from commercial cellulose powder. Although the acetylated loofa sponge showed a slight weight loss, it was not disintegrated by activated sludge. The results obtained in this study showed that acetylated loofa sponge is suitable as an immobilization carrier for bioprocesses involving cellulase.     

A hybrid approach to keyframe extraction from motion capture data using curve simplification and principal component analysis

In this paper, we propose a novel method to extract keyframes from motion capture data. A hybrid approach, which combines a curve‐simplification algorithm with an initialization procedure including principal component analysis, is adopted. The developed method automatically extracts an appropriate number of keyframes at high speed without performance degradation. Experimental results prove the effectiveness of the present method. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Epitaxially grown free-standing diamond platelet

We obtained an epitaxially grown free-standing diamond platelet utilizing epitaxial diamond film formed on a {100} iridium surface using a d.c. plasma CVD process. Iridium was selected as a suitable substrate material for the heteroepitaxy of diamond based on original criteria. Confocal Raman spectroscopy revealed that the diamond platelet contained little or no non-diamond carbon. The obtained diamond platelet is transparent to visible light and cleavable along the 110 direction on the surface. The angles between the top surface and the cross-sectional surfaces are approximately 55°, almost equal to the theoretical angle of 54.74° between {100} and {111} planes in cubic crystals. Therefore, the cross-sectional surfaces would be {111} planes of a typical facet for single-crystalline diamond. This means that the diamond platelet we have formed has relatively good crystallinity.     

Temperature and Stress Distributions in a Hollow Cylinder of Functionally Graded Material: The Case of Temperature-Independent Material Properties

We have presented a numerical technique for analyzing one-dimensional transient temperature distributions in a circular hollow cylinder that was composed of functionally graded ceramic–metal-based materials, without considering the temperature-dependent material properties. The functionally graded material (FGM) cylinder was assumed to be initially in a steady state of gradient temperature; the ceramic inner surface was exposed to high temperature, and the metallic outer surface, which was associated with its in-service performance, was exposed to low temperature. Then, the FGM cylinder was cooled rapidly on the ceramic surface of the cylinder, using a cold medium. The transient temperature and related thermal stresses in the FGM cylinder were analyzed numerically for a model of the mullite–molybdenum FGM system. The technique for analyzing the temperature distribution is quite simple and widely applicable for various boundary conditions of FGMs, in comparison with methods that have been proposed recently by other researchers.