Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings

Recently, several new solid lubricants and modern lubrication concepts have been developed to achieve lower friction and wear and thus longer lifetime in severe tribological applications. The aim of this study is to characterize tribo-layers formed during ball-on-disc testing on low-friction, Cl-containing TiN coatings deposited by plasma assisted chemical vapor deposition and to clarify their formation mechanism. Characterization of the transfer layers was done by optical microscopy, optical profilometry, Raman spectroscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Differential scanning calorimetry was used to provide information on the chlorine-influenced chemical reactions of the coatings in ambient air. Iron oxide layers of a thickness in the nm-range have been found on low-chlorine containing TiN coatings (<3 at.% Cl) showing friction coefficients of approximately 0.8, whereas on TiN coatings with higher chlorine contents (>3 at.% Cl) rutile layers were preferably formed, resulting in friction coefficients below 0.2. This self-lubrication mechanism can be explained by the in-situ formation of easy-shearable titanium oxides in the contact zone in the presence of humidity and oxygen.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Molecular pharmacology of voltage-dependent calcium channels

Voltage-dependent Ca2+ channels serve as the only link to transduce membrane depolarization into cellular Ca(2+)-dependent reactions. A wide variety of chemical substances that have the ability to modulate Ca2+ channels have been demonstrated both for their clinic utility and for importance in elucidating the molecular basis of various biological responses. Recently, introduction of molecular biology to pharmacology has brought a great deal of information about the molecular basis of drug action in Ca2+ channels. In this review, we attempt to overview recent progress in understanding the interactions between Ca2+ channels and their blockers, namely Ca2+ antagonists, from a molecular and structural point of view.     

A Technique to Eliminate Redundant Inter-Processor Communication on Parallelizing Compiler TINPAR

Optimizing inter-processor (PE) communication is crucial for parallelizing compilers for message-passing parallel machines to achieve high performance. In this paper, we propose a technique to eliminate redundant inter-PE messages. This technique utilizes data-flow analysis to find a definition point that corresponds to a use point where the definition and the use occur in different PEs. If several read accesses occurred in the same PE use the data defined at the same definition point in another PE, redundant inter-PE messages are eliminated as follows: only one inter-PE communication is performed for the earliest read access and the previously received data are used for the following read. In order to guarantee the consistency of the data, a valid flag and a sent flag are provided for each chunk of received data. The control of these flags is equivalent to the coherence control by the self invalidation on a compiler aided cache coherence scheme.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Interactions between nano-spacing flying head sliders and ultra-thin liquid lubricant films with non-uniform distribution in hard disk drives

This paper describes the effect of ultra-thin liquid lubricant films on air bearing dynamics and flyability of less than 10 nm spacing flying head sliders in hard disk drives. In particular, the effect of non-uniform lubricant film distributions on head/disk interface dynamics are studied. The disks with lubricant on one half of disk surface thicker than the other half were used in this study. The dynamics of sliders is monitored using acoustic emission (AE) and the interactions between the slider and disk are investigated experimentally. The disks were also examined with a scanning micro-ellipsometer before and after each test. Complicated slider responses were observed and clarified. In addition, it was found that the periodic lubricant film thickness modulations or non-uniformity caused by the slider-disk contact interactions could be observed. It is suggested that this lubricant film thickness non-uniformity will be one of the technical issues in order to achieve ultra-low head/disk contact interface of less than 10 nm.     

A novel method for determining vitamin B1 in a wide variety of foodstuffs with or without polyphenols

Certain foodstuffs exhibit matrix interference effects on the vitamin B₁ analysis prescribed in the official methods of the European Union, AOAC International, and Japan. In this study, we demonstrated that one of the problematic polyphenols in green tea or cocoa was tannin. For these matrices, thiamine was found to interact with tannin in the extraction step and was thus removed by filtration as a residue. To resolve the matrix interference, we proposed lowering the pH of the extraction solution by adding hydrochloric acid after the enzyme reaction. High precision (2–3% RSDr) and good recovery (98.3–103%) were obtained with reference materials using the proposed method. We also confirmed the equivalence of the obtained data from the proposed method and the Japanese official method for nutritional labeling. From these results, the method was found to be effective for vitamin B₁ analysis regardless of the presence of interference matrices.     

Echium oil is better than rapeseed oil in improving the response of barramundi to a disease challenge

Pathogen infection stimulates the fatty acid (FA) metabolism and the production of pro-inflammatory derivatives of FA. Barramundi, Lates calcarifer, was fed on a diet rich in preformed long-chain (?C₂₀) polyunsaturated fatty acids (LC-PUFA) from fish oil (FO), to compare with diets containing high levels of C₁₈ precursors for LC-PUFA – stearidonic (SDA) and γ-linolenic acid (GLA) – from Echium plantagineum (EO), or rapeseed oil (RO) rich in α-linolenic acid (ALA), but a poor source of LC-PUFA and their precursors. After 6 weeks, when growth rates were similar amongst the dietary treatments, a sub-lethal dose of Streptococcus iniae was administered to half of the fish, while the other half were maintained unchallenged and were pair-fed with the infected fish. Under a disease challenge situation, the tissue FA depots depleted at 3 days post-infection (DPI) and were then restored to their previous concentrations at 7 DPI. During the infection period, EO fish had a higher content of n3 and n6 PUFA in their tissues, higher n3:n6 PUFA ratio and reduced levels of the eicosanoids, TXB₂ and 6-keto-PGF_1α, in their plasma compared with RO fish. Fish fed on FO and EO had a longer lasting and enduring response in their FA and eicosanoid concentrations, following a week of bacterial infection, compared with those fed on RO. EO, containing SDA and GLA and with a comparatively higher n3:n6 PUFA ratio, proved more effective than RO in compensating for immunity stress.     

Detection method of emerging leading papers using time transition

To survive worldwide competitions of research and development in the current rapid increase of information, decision-makers and researchers need to be supported to find promising research fields and papers. But finding those fields from an available data in too much heavy flood of information becomes difficult. We aim to develop a methodology supporting to find emerging leading papers with a bibliometric approach. The analyses in this work are about four academic domains using our time transition analysis. In the time transition analysis, after citation networks are constructed, centralities of each paper are calculated and their changes are tracked. Then, the centralities are plotted, and the features of the leading papers are extracted. Based on the features, we proposed ways to detect the leading papers by focusing on in-degree centrality and its transition. This work will contribute to finding the leading paper, and it is useful for decision-makers and researchers to decide the worthy research topic to invest their resources.