Tilt angle dependence of output power in an 80 kWp hybrid PV system installed at Shiga in Japan

One-year field experience of an 80 kW PV system on a rooftop of the ROHM Memorial VLSI Research Center at the Ritsumeikan University is reported. All kinds of live technology available materials, c-Si, poly Si and a-Si solar cells are installed on the three tilt angles of 26.5° south, horizontal and north 26.5°. Systematic PV performances have been measured from the beginning of June 2000 to the end of May 2001. Measurements were made mainly on DC output power from four kinds of PV arrays; c-Si south side, a-Si of horizontal and poly Si, a-Si north side. It has been shown from analyses of monthly data on each material that almost 70% of with that in the south side in the annual average. In summer a-Si module yields the maximum output power normalized to 1 kWp. On the contrary c-Si module shows larger output in winter. Some other unique results are demonstrated and discussed.     

Transport of single cells using an actin bundle-myosin bionanomotor transport system

The potential of using actin bundles for the transport of liposomes and single cells across myosin-coated surfaces is investigated. Compared to that observed with filamentous actin, the liposome transport using actin bundles was more linear in nature and able to occur over longer distances. Bundles, but not filamentous actin, were capable of moving single cells. Cargo unloading from bundles was achieved by incubation with Triton X-100. These data suggest that actin bundling may improve the ability of the myosin motor system for nanotransport applications.     

Preparation and properties of siloxane polyimide films containing silver nanoparticles and microparticles as conducting adhesive films

Electrically conducting adhesive films containing silver nanosized particles (AgNPs) were prepared using siloxane polyimide resin (SPI), and their physical properties were investigated. AgNPs with diameters of ca. 6 nm were prepared using oleylamine as a stabilizer. A mixture of the AgNPs and SPI was vigorously stirred, and cast on a polyethylene terephthalate support. Films were then fabricated using a doctor blade method. The heat resistance of the SPI film containing 60 wt% AgNPs was 35 °C higher than that of the SPI film without AgNPs. In addition, epoxy composite SPIAg (Epo-SPIAg) films containing a mixture of AgNPs and micro-sized silver flakes were prepared. Inclusion of AgNPs in these films strengthened their adhesion to silicon or bismaleimide triazine resin substrates. The glass transition temperature of the Epo-SPIAg films containing AgNPs was slightly higher than that of the film containing only micro-sized silver flakes.     

Chemical bath deposition for the fabrication of antireflective coating of spherical silicon solar cells

A CdS film as an antireflective (AR) coating has been successfully deposited on spherical silicon solar cells by chemical bath deposition, which is a novel deposition method of AR coatings for spherical silicon solar cells. The CBD method is a growth method in an aqueous solution and enables film formation for electronic devices with arbitrary shapes. The solar cell performance of the cell with the CdS film showed a 16% increase in short circuit current compared to that without an ARC. The result confirms that the CBD method is useful for the ARC fabrication of spherical silicon solar cells.     

Noninvasive subsurface analysis using multiple miniaturized Raman probes, part I: basic study of thin-layered transparent models of biomedical tissues

This study describes a basic theory for reconstructing pure Raman signals of materials composing a multilayer sample from Raman spectra obtained using two types of miniaturized Raman probes. An illustrative example is demonstrated using a multilayer system of samples composed of the transparent plastics polymethylmethacrylate (PMMA) and polyethylene (PE) as a model of thin-layered biomedical tissues. When the same region of an object is measured using Raman probes with different focal properties, the Raman spectra provide different depth profile information depending on the level of light penetration. Thus, a detailed comparison of the spectra can provide an interesting opportunity to probe the differences between the layers. A simple analytic form is presented for reconstructing the pure Raman spectra of the embedded layer. The method applies an understanding of the Raman sampling volume in layered transparent materials to the interpretation of Raman spectra experimentally measured by multiple probes. The basic theory described here is necessary for the expansion of the technique to turbid media, such as biological samples, where light-scattering effects must be considered. The potential applications of the proposed method include material and catalyst subsurface probing through different embedded materials, such as assessment of silicon wafers, effective noninvasive screening for catalyst synthesis, and biomedical tissue research.     

Kernel analysis of partial least squares (PLS) regression models

An analytical technique based on kernel matrix representation is demonstrated to provide further chemically meaningful insight into partial least squares (PLS) regression models. The kernel matrix condenses essential information about scores derived from PLS or principal component analysis (PCA). Thus, it becomes possible to establish the proper interpretation of the scores. A PLS model for the total nitrogen (TN) content in multiple Thai fish sauces is built with a set of near-infrared (NIR) transmittance spectra of the fish sauce samples. The kernel analysis of the scores effectively reveals that the variation of the spectral feature induced by the change in protein content is substantially associated with the total water content and the protein hydration. Kernel analysis is also carried out on a set of time-dependent infrared (IR) spectra representing transient evaporation of ethanol from a binary mixture solution of ethanol and oleic acid. A PLS model to predict the elapsed time is built with the IR spectra and the kernel matrix is derived from the scores. The detailed analysis of the kernel matrix provides penetrating insight into the interaction between the ethanol and the oleic acid.     

Optical coherent broad-band transmission for long-haul anddistribution systems using subcarrier multiplexing

Signal multiplexing techniques for coherent optical transmission are compared, and appropriate application for a coherent subcarrier multiplexing (SCM) system is discussed. Optical frequency modulation (FM) using direct modulation of a distributed-feedback laser diode (DFB-LD) and a heterodyne detection is shown to be feasible. A transmission system using a local laser in the transmitter is unaffected by polarization and is cost effective. Phase noise can be suppressed by a phase-noise-canceling circuit (PNC) in a heterodyne receiver. This circuit can also effectively compensate for the frequency of instability of light sources. A theoretical simulation of a coherent SCM system showed that 100 channels of 30-MHz FM signal or 15 channels of 155-Mb/s signal can be distributed to 10000 subscribers using single-stage or double-stage optical amplifiers     

Effect of Manganese Oxide Additive on the Dielectric Properties of Mixed-Sintering Ceramics

The influence of internal electrode material on the sintering of mixed-sintering ceramics and the effect of MnO₂ additive on improving their dielectric properties were investigated for their application as multilayer ceramic capacitors. The resistivities of mixed-sintering ceramic pellets sintered with Ag-Pd electrode material decreased remarkably because of the expulsion of component elements during sintering. A small amount of MnO₂ additive improved the resistivities. Extended X-ray absorption fine-structure analysis showed that MnO₂ exists in the grain boundaries and compensates for the electrical valence of the expelled elements.     

煅烧炉用喷射耐火料的近期发展趋向

开发了一种干式喷射隔热材料,其热导率与隔热板一样低.它正取代普通的隔热板,因它的安装方便,工作环境较好.另外,我们已开发了新的湿式喷射料体系,它效率高,工作环境好.