Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Brake wear from vehicles as an important source of diffuse copper pollution.

In this article we show that brake wear from road traffic vehicles is an important source of atmospheric (particulate) copper concentrations in Europe. Consequently, brake wear also contributes significantly to deposition fluxes of copper to surface waters. We estimated the copper emission due to brake wear to be 2.4 kiloton per year. For comparison, the official database for Europe (without brake wear) totals 2.6 kiloton per year. In Western Europe the brake wear emissions dominate the total emission of copper. Using the spatially resolved emission data, copper distributions over Europe were calculated with the LOTOS-EUROS model. Without brake wear the model underestimates observed copper concentrations by a factor of 3, which is in accordance with other studies. Including the brake wear emissions largely removes the bias. We find that 75% of the atmospheric copper input in the North Sea may be due to brake wear. We estimate that about 25% of the total copper input in the Dutch part of the North Sea stems from brake wear. Although the estimated brake wear copper emission is associated with a large uncertainty, it significantly improves our understanding of the copper cycle in the environment.     

Use of modelling for optimization and upgrade of a tropical wastewater treatment plant in a developing country.

This paper presents results of a novel application of coupling the Activated Sludge Model No. 3 (ASM3) and the Anaerobic Digestion Model No.1 (ADM1) to assess a tropical wastewater treatment plant in a developing country (Surat, India). In general, the coupled model was very capable of predicting current plant operation. The model proved to be a useful tool in investigating various scenarios for optimising treatment performance under present conditions and examination of upgrade options to meet stricter and upcoming effluent discharge criteria regarding N removal. It appears that use of plant-wide modelling of wastewater treatment plants is a promising approach towards addressing often complex interactions within the plant itself. It can also create an enabling environment for the implementations of the novel side processes for treatment of nutrient-rich, side-streams (reject water) from sludge treatment.     

A Radiation Imaging Detector Made by Postprocessing a Standard CMOS Chip

An unpackaged microchip is used as the sensing element in a miniaturized gaseous proportional chamber. This letter reports on the fabrication and performance of a complete radiation imaging detector based on this principle. Our fabrication schemes are based on wafer-scale and chip-scale postprocessing. Compared to hybrid-assembled gaseous detectors, our microsystem shows superior alignment precision and energy resolution, and offers the capability to unambiguously reconstruct 3D radiation tracks on the spot.     

Photonic Demodulator With Sensitivity Control

A current assisted photonic demodulator for use as a pixel in a 3-D time-of-flight imager shows nearly 100% static demodulator contrast and is operable beyond 30 MHz. An integrated tunable sensitivity control is also presented for increasing the distance measurement range and avoiding unwanted saturation during integration periods. This is achieved by application of a voltage on a dedicated drain tap showing a quenching of sensor sensitivity to below 1%     

Towards Testing Product Line Architectures

A product line architecture is a single specification capturing the overall architecture of a series of closely related products. Its structure consists of a set of mandatory elements and a set of variation points. Whereas mandatory elements are part of the architecture of every product in the product line architecture, variation points precisely define the dimensions along which the architectures of individual products differ from each other.The increased use of product line architectures in today's software development projects poses several challenges for existing testing techniques. In this paper we discuss those challenges and discuss what we believe are opportunities for addressing them.     

Measurement of the axial point spread function in scattering media using single-mode fiber-based optical coherence tomography

The authors studied the axial point spread function of optical coherence tomography for Gaussian intensity profiles emitted from and coupled back into single-mode fibers for signals from a scattering medium. The determined Rayleigh length of the axial point spread function was roughly twice the one measured from the reflection of a mirror. Using the measured point spread function in combination with the single backscatter model allowed determination of the attenuation coefficient of the suspension.     

On the Subjective Quality of Social Justice: The Role of Affect as Information in the Psychology of Justice Judgments.

This article argues that it is not uncommon for people forming justice judgments to lack information that is most relevant in the particular situation. In information-uncertain conditions, people may therefore construct justice judgments by relying on how they feel about the events they have encountered, and justice judgments may hence be strongly influenced by affect information. Findings show that in information-uncertain conditions, the affective states that people had been in prior and unrelated to the justice event indeed strongly influenced their justice judgments. These findings thus reveal that in situations of information uncertainty, people's judgments of justice can be very subjective, susceptible to affective states that have no logical relationship with the justice judgments they are constructing. Implications for the social psychology of justice and the literature on social cognition and affect are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)