Influence of poly(acrylic acid) molar mass on the fracture properties of glass polyalkenoate cements

The failure behaviour of glass polyalkenoate cements was investigated using a linear elastic fracture mechanics (LEFM) approach. Cements were based on four model glasses with varying reactivity and four poly(acrylic acid)s (PAA)s with number average molar masses (Mn) ranging from 3.25 × 104 to 1.08 × 105. Cement properties were studied at time intervals of one, seven and twenty eight days. Compressive strengths (c) of the cements increased with increasing fluorine content of the glass, with increased molar mass of the PAA and with ageing time. The Young's moduli increased with time, but were lower for cements based on the fluorine free glass. Moduli values were independant of PAA molar mass. The un-notched fracture strength (f) of the cement increased with the molar mass of the PAA and with ageing time. Glass composition did not appreciably influence the un-notched fracture strength. The fracture toughness (KIC) increased with the molar mass of the PAA and with ageing time, but reduced with increasing fluorine content of the glass. The toughness (GIC) was dependant on molar mass. The influence of molar mass was not as great as predicted by the reptation chain pull-out model for fracture. The molar mass dependence of toughness was greatest with the lower fluorine content glasses. The plastic zone size at the crack tip increased with the molar mass of the PAA. However the plastic zone size decreased with ageing time for all the cements studied and was smaller for the more reactive higher fluorine content glasses.     

Conditional-sampling spectrograph detection system for fluorescence measurements of individual airborne biological particles

We report the design and operation of a prototype conditional-sampling spectrograph detection system that can record the fluorescence spectra of individual, micrometer-sized aerosols as they traverse an intense 488-nm intracavity laser beam. The instrument's image-intensified CCD detector is gated by elastic scattering or by undispersed fluorescence from particles that enter the spectrograph's field of view. It records spectra only from particles with preselected scattering-fluorescence levels (a fiber-optic-photomultiplier subsystem provides the gating signal). This conditional-sampling procedure reduces data-handling rates and increases the signal-to-noise ratio by restricting the system's exposures to brief periods when aerosols traverse the beam. We demonstrate these advantages by reliably capturing spectra from individual fluorescent microspheres dispersed in an airstream. The conditional-sampling procedure also permits some discrimination among different types of particles, so that spectra may be recorded from the few interesting particles present in a cloud of background aerosol. We demonstrate such discrimination by measuring spectra from selected fluorescent microspheres in a mixture of two types of microspheres, and from bacterial spores in a mixture of spores and nonfluorescent kaolin particles.     

A rapid urease test for presumptive identification of Cryptococcus neoformans

Extra-contractual referrals (ECRs) can be a cause of considerable anxiety to purchasing authorities, mainly because of their potential to generate unexpected expenditure. But ECRs can also be used as a tool for monitoring the demand for, and quality of, clinical services. ECRs were studied in the Darlington Health Authority district using a variety of methods including inter-disciplinary meetings, a series of interviews with local GPs, and a questionnaire to general practitioners on 230 consecutive ECRs. The methods and results of the questionnaire study are presented. The commonest reasons for making ECRs included the mistaken belief that a contract existed with the ECR provider, patient dissatisfaction with the local provider, and referral to benefit from shorter waiting lists. ECRs for bone-mass densitometry, orthopaedics, and ear nose and throat services were over-represented. Questionnaire results were validated by comparison with an interview study of all GPs in the district. We conclude that trends in ECRs can be monitored as a convenient "early warning system' to alert purchasing authorities to changes in demand or perceived problems with local provider units. ECR data must be interpreted in the context of further local background information from sources such as GPs and public health physicians. In the case of Darlington, scrutiny of ECRs has led to changes in services and contracts.     

Transient accumulation of proteins at interrod and rod enamel growth sites

Conceptually, there should be a brief interval in time when newly secreted proteins "pile up" at secretory sites just outside the membrane of ameloblasts. Indeed, previous cytochemical studies have suggested that glycosylated and/or sulfated glycoproteins accumulate at enamel growth sites. Colloidal gold lectin cytochemistry and immunocytochemistry with antibodies to enamel proteins and phosphoserine, combined with cycloheximide and brefeldin A to inhibit protein synthesis and secretion, were applied to characterize the distribution of newly formed proteins at enamel interrod and rod growth sites. Although enamel growth sites show a "rarefied" appearance, the results indicate that one or more subclasses of enamel proteins accumulate near the cell surface at sites where elongation of enamel crystallites contributes to thickening of the enamel layer. These proteins are glycosylated and/or phosphorylated and, at least in the case of the glycosylated ones, are rapidly processed after they are released extracellularly. In contrast, immunolabeling for amelogenins is generally weaker near the cell surface and more intense at a short distance away from the site where crystallites elongate. The data suggest that the enamel proteins accumulating at growth sites likely belong to the non-amelogenin category and play a transient role in promoting the lengthening of crystallites. It is concluded that areas near the ameloblast membrane where certain enamel proteins accumulate in fact constitute the equivalent of a mineralization front.     

Progressive subretinal fibrosis and blindness in patients with multifocal granulomatous chorioretinitis

Since women with a first-degree relative with breast cancer are at increased risk for breast cancer, it is of special importance that they adhere to early detection programs. In this study, women with (389) and without (3295) a family history of breast cancer were compared with respect to risk perception, breast cancer anxiety, and early detection behavior. Special attention was paid to the role of knowing that family history is a breast cancer risk factor. It was found that 46% of "family history positives" did not know that their risk was increased by their family history. Still, family history positives had increased risk perception; our results suggest that this was partly caused by their knowing they belonged to a risk group and partly by their having experienced the disease at close range. Although family history positives had higher risk perceptions, no differences in early detection behavior were found. This could not be attributed to high anxiety levels. Implications for health education are discussed.     

Multi-level hierarchical interface-based supervisory control

Hierarchical Interface-Based Supervisory Control employs interfaces that allow properties of a monolithic system to be verified through local analysis. By avoiding the need to verify properties globally, significant computational savings can be achieved. In this paper we provide local requirements for a multi-level architecture employing command-pair type interfaces. This multi-level architecture allows for a greater reduction in complexity and improved reconfigurability over the two-level case that has been previously studied since it allows the global system to be partitioned into smaller modules. This paper also provides results for synthesizing supervisors in the multi-level architecture that are locally maximally permissive with respect to a given specification and set of interfaces.     

Presheaves as Configured Specifications

The paper addresses a notion of configuring systems, constructing them from specified component parts with specified sharing. This notion is independent of any underlying specification language and has been abstractly identified with the taking of colimits in category theory. Mathematically it is known that these can be expressed by presheaves and the present paper applies this idea to configuration. We interpret the category theory informally as follows. Suppose ? is a category whose objects are interpreted as specifications, and for which each morphism u : X→Y is interpreted as contravariant ‘instance reduction’, reducing instances of specification Y to instances of X. Then a presheaf P: Set ^?op represents a collection of instances that is closed under reduction. We develop an algebraic account of presheaves in which we present configurations by generators (for components) and relations (for shared reducts), and we outline a proposed configuration language based on the techniques. Oriat uses diagrams to express colimits of specifications, and we show that Oriat's category Diag(?) of finite diagrams is equivalent to the category of finitely presented presheaves over ?. Received May 1998 / Accepted in revised form August 2000     

Photolithography of amorphous films of (η5-C5H5)2Ti(N3)2 on silicon (111) resulting in TiO2: The mechanism of the photodeposition reaction

Photolithography to produce TiO₂ patterns from amorphous films of (⁵-C₅H₅)₂Ti(N₃)₂ has been demonstrated. The efficiency of the reaction has been measured yielding a quantum yield of 0.025. The mechanism of the photoreactions of (⁵-C₅H₅)₂Ti(N₃)₂ has been studied using Fourier transform-infrared spectroscopy in both a low-temperature 1,2-epoxyethylbenzene glass and as surface films. In each case the primary photochemical process was found to be loss of a single azido group. The result of subsequent photolysis was found to be dependent upon medium and temperature. In the low-temperature glass no further photochemistry was observed. The exhaustive photolysis of films at 20 K, or room temperature, under a vacuum or in air led to loss of all ligands and the formation of TiO₂.     

The Alexandria Digital Library architecture

Since 1994, the Alexandria Digital Library Project has developed three prototype digital libraries for georeferenced information. This paper describes the most recent of these efforts, a three-tier client-server architecture that relies heavily on a middleware layer to present a single uniform set of interfaces to multiple heterogeneous servers. These standard interfaces, all of which are implemented in HTTP, support session management, collection discovery and evaluation, metadata searching, metadata retrieval, and online holding retrieval. An XML-based metadata encoding scheme and a simple Boolean query language have also been developed. The architecture described by these interfaces has been implemented at UCSB.     

Sizing dielectric spheres and cylinders by aligning measured and computed resonance locations: algorithm for multiple orders

An algorithm for determining the size of dielectric spheres and cylinders by aligning measured and computed resonance locations is presented. The orders of the resonance locations need not be known a priori. The algorithm is applicable to several types of scattering and emission spectra of spheres and cylinders if the index of refraction including dispersion is known and uniform, or nearly uniform, throughout the sphere or cylinder. The algorithm performs well when tested with groups of computed resonance locations of spheres (synthetic data) and with measured fluorescence emission spectra of spheres exhibiting as many as 5 orders of resonance.