Practical Design Model for Calculating Bubble Diffuser Contactor Ozone Transfer Efficiency

Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.

The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known.     

The pheromone of the eastern tent caterpillar,Malacosoma americanum (F.) (lepidoptera,Lasiocampidae)

The pheromone system of the eastern tent caterpillar,M. americanum, has been identified as a mixture of (E,Z)-5,7-dodecadienal and the corresponding alcohol. Field data on the attractiveness of the aldehyde alone were not consistent, but mixtures of aldehyde and alcohol in varying proportions were attractive to males. Addition of small amounts ofE,Z acetate toE,Z aldehyde had no effect on male response, but larger amounts reduced trap catch. Traps baited withZ,E, E,E, orZ,Z aldehydes were not more attractive than blank traps. Pherocon IC traps fortified with extra adhesive and baited with lures consisting of 500 µg (E,Z)-5,7-dodecadienal with either 250 or 100 µg of the corresponding alcohol trapped as many as 100 males/trap/night with means of 15–20. Lures prepared from purified (94%E,Z) aldehyde and alcohol were more attractive than those prepared from unpurified (58%E,Z) materials.DeceasedMention of a company name or proprietary product does not constitute an endorsement by the U.S. Department of Agriculture.     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

A new approach for mapping of Biological Soil Crusts in semidesert areas with hyperspectral imagery

Biological Soil Crusts (BSCs), consisting of cyanobacteria, algae, microfungi, lichens and bryophytes in varying proportions, live within or immediately on top of the uppermost millimeters of soil, where they form a more or less firm aggregation of soil particles and organisms. They mainly occur in soils of arid and semi-arid regions, which cover more than 35% of the earth's land surface and are assumed to play a major role as primary producers, C- and N-sinks and soil stabilizers.

In order to establish a methodology for mapping of BSCs, their spectral characteristics with respect to different crust types were analyzed. The resulting reflectance spectra of different crust types had a shallow absorption feature centered around 680 nm in common, in which they differed from the spectra of bare soil.

In October 2004, hyperspectral CASI data with a spatial resolution of 1 m were recorded in conjunction with field spectroscopic measurements in the Succulent Karoo, South Africa. Available spectral indices for Biological Soil Crusts were tested on the image but did not produce satisfying classifications. Therefore, an alternative approach was established based on spectral field data, field observations and the hyperspectral dataset. The newly developed Continuum Removal Crust Identification Algorithm (CRCIA) is based on small and narrow spectral characteristics, that were extracted by continuum removal and subsequently expressed as a set of logical conditions. Using this method, 16.2% of the area which covers 12 km² of gently sloping hills with some granite outcrops were classified as BSCs. Validation of the classification resulted in a Kappa index of 0.831.

In a next step, the methodology will be tested with regard to scale-dependent effects and applied to images covering areas with additional types of BSCs and soil to develop a robust and generally applicable method.     

Trends in psychotherapy process research: Samples, measures, researchers, and classic publications.

Psychotherapy studies published in the Journal of Counseling Psychology (JCP) and the Journal of Consulting and Clinical Psychology (JCCP) between 1978 and 1992 were examined. Differences were found between the 2 journals. JCP published mostly process, outcome, and analog research, whereas JCCP published mostly outcome research. Most process and process-outcome studies across journals were of individual, brief therapy. Across the years, more diversity was evident in samples used in process research in terms of student status, gender, and race of clients and therapists. Three content areas were prominent in the process measures and classic studies: therapist techniques, therapist influence, and facilitative conditions. Lists are provided of the frequently used measures, most productive authors, and classic studies in process research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hierarchical planning in a supervisory control context with compositional abstraction

Discrete Event Dynamic Systems - Hierarchy is a tool that has been applied to improve the scalability of solving planning problems modeled using Supervisory Control Theory. In the work of Hill and...     

Epidemiology of infection with Epstein-Barr virus types 1 and 2: lessons from the study of a T-cell-immunocompromised hemophilic cohort

In apparent contrast to earlier work on Epstein-Barr virus (EBV) carriage in the general Caucasian population, in vitro virus isolations from human immunodeficiency virus (HIV)-positive male homosexual cohorts have shown frequent examples of multiple EBV infection and an overall prevalence of type 2 EBV strains exceeding 30%. Here we ask to what extent these findings might hold true in another T-cell-immunocompromised cohort, HIV-positive hemophilic patients. Resident EBV strains were rescued within lymphoblastoid cell lines derived from the blood and throat washings of 39 such individuals, using the same in vitro protocols of virus isolation as for the homosexual cohort. A mean of 19 independent cell lines was made per patient, and in each case the resident virus was characterized by PCR-based viral genomic analysis and by immunoblotting to reveal the viral "EBNAprint." By these criteria a significant proportion (14 of 39) of the hemophilic cohort carried more than one EBV strain, suggesting that T-cell impairment does indeed sensitize virus carriers to reinfection with new strains of exogenously transmitted virus. However, the overall incidence of type 2 EBV infection was 10%, which is close to that observed in the earlier work with healthy carriers and substantially lower than that seen in HIV-positive homosexuals. We infer that type 2 EBV is relatively rare in the general Caucasian population but has become endemic in the homosexual community.     

Interventional ultrasound in Europe

"Interventional ultrasound," defined as any diagnostic and therapeutic procedure performed under ultrasound guidance was first introduced in Europe, where its early development took place in Vienna, in Copenhagen, in Italy and in Switzerland. However, many of the applications of interventional ultrasound have been based on important pioneer work using other less-suitable needle guiding methods from the pre-ultrasound era. The European contributions to "interventional ultrasound" have especially been in the development of new puncture equipment, in the dissemination of various biopsy techniques, and draining procedures and, more recently, in the development of many different tissue-ablation techniques. The above contributions, which are outlined in this historical review, have, together with significant contributions from the rest of the world-not least from the United States and Japan-created a most efficient diagnostic as well as therapeutic tool for the benefit of our patients.     

Influence of poly(acrylic acid) molar mass on the fracture properties of glass polyalkenoate cements

The failure behaviour of glass polyalkenoate cements was investigated using a linear elastic fracture mechanics (LEFM) approach. Cements were based on four model glasses with varying reactivity and four poly(acrylic acid)s (PAA)s with number average molar masses (Mn) ranging from 3.25 × 104 to 1.08 × 105. Cement properties were studied at time intervals of one, seven and twenty eight days. Compressive strengths (c) of the cements increased with increasing fluorine content of the glass, with increased molar mass of the PAA and with ageing time. The Young's moduli increased with time, but were lower for cements based on the fluorine free glass. Moduli values were independant of PAA molar mass. The un-notched fracture strength (f) of the cement increased with the molar mass of the PAA and with ageing time. Glass composition did not appreciably influence the un-notched fracture strength. The fracture toughness (KIC) increased with the molar mass of the PAA and with ageing time, but reduced with increasing fluorine content of the glass. The toughness (GIC) was dependant on molar mass. The influence of molar mass was not as great as predicted by the reptation chain pull-out model for fracture. The molar mass dependence of toughness was greatest with the lower fluorine content glasses. The plastic zone size at the crack tip increased with the molar mass of the PAA. However the plastic zone size decreased with ageing time for all the cements studied and was smaller for the more reactive higher fluorine content glasses.