Geology and fluid chemistry of the Fushime geothermal field, Kyushu, Japan

The Fushime geothermal field is located in a depression close to the coast line. The system is characterized by very high reservoir temperature (>350°C), and a high salinity production fluid. Geological analysis shows that the main reservoir in this field occurs in a fractured zone developed around a dacite intrusion located in the center of the field. High permeability zones recognized by drilling data are found to be associated with fault zones. One of these zones is clearly associated with a NW–SE trending andesite dike swarm which was encountered in some wells.Alteration in the system can be divided into four zones, in order of increasing temperature, based on calcium–magnesium aluminosilicate mineral assemblages: i.e., the smectite, transition, chlorite and epidote zones. The feed zone is located in the chlorite and epidote zones, which can be further divided into three sub-zones according to their potassium or sodium aluminosilicate mineralogy, from the center of the discharge zone: K-feldspar–quartz, sericite–quartz, and albite–chlorite zones.Chloride concentration of the sea-water is 19,800 mg/l, and Br/Cl mole ratio is 1.55. Based on geochemical information, the reservoir chloride concentration of this field ranges from 11,600 to 22,000 mg/kg. The Clres (Cl in reservoir), Br/Cl ratios and stable isotope data indicate that the Fushime geothermal fluid originated from sea-water and is diluted by ground water during its ascent. Some fluids produced from geothermal wells show low pH (about 4). It is thought that sulfide mineral (PbS, ZnS) precipitation during production produces this acidic fluid.     

HD/SHD still image database system and image distribution in broadband network applications

This paper focuses on a practical design for an efficient scalable image database and retrieval system over broadband networks. It describes a concrete solution for the implementation of HD/SHD (high-definition/super-high-definition) still image retrieval services which can be used in different applications. The structure of the complete system, consisting of a directory server, an image server, and MMI (man-machine interface) devices, has been presented, detailing each element and their corresponding functions. The desired HD/SHD image is displayed on the HD-PDP (plasma display panel) with the aid of image matching. The proposed system generates image index automatically, eliminating special skills in preparing index images and crucially reducing the processing time (from 35 min to 110 s), and does not use keywords. It has been also shown that these indices can be used for quite accurate image retrieval, i.e., the system provides high precision rates (currently up to 98%) to the user, eliminating troubles encountered in the image retrieval operations due to limitation on the user’s age, culture, knowledge, and languages.The broadband IP networks currently have a number of issues from the viewpoint of practical system operations, and so the requirements and issues needed for the networks are discussed from the viewpoint of in-service performance, differentiation among different types of services, secure connections, and so on, focusing on handling of HD/SHD still images.     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

A hybrid approach to keyframe extraction from motion capture data using curve simplification and principal component analysis

In this paper, we propose a novel method to extract keyframes from motion capture data. A hybrid approach, which combines a curve‐simplification algorithm with an initialization procedure including principal component analysis, is adopted. The developed method automatically extracts an appropriate number of keyframes at high speed without performance degradation. Experimental results prove the effectiveness of the present method. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Size dependence of THz region dielectric properties for barium titanate fine particles

Barium titanate (BaTiO₃) crystallites with various particle sizes from 22 to 500 nm were prepared by the two-step thermal decomposition method of barium titanyl oxalate. Various characterizations revealed that these particles were impurity-free, defect-free, dense BaTiO₃ particles. The powder dielectric measurement clarified that the dielectric constant of BaTiO₃ particles with a size of around 58 nm exhibited a maximum of over 15,000. To explain this size dependence, the THz region dielectric properties of BaTiO₃ fine particles, especially Slater mode frequency, were measured using the far infrared (FIR) reflection method. As the result, the lowest Slater mode frequency was obtained at 58 nm. This tendency was completely consistent with particle size dependence of the dielectric constant.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.     

Soluble network polymers based on trifluoropropyl-substituted open-cage silsesquioxane: Synthesis,properties, and application for surface modifiers

Fluorinated completely condensed polyhedral oligomeric silsesquioxanes (F-CC-POSSs) are widely utilized as surface modifiers for polymeric materials because of their polyhedral and fluorine-rich structures, which generate polymers with lower surface energies under molecular-level control. In contrast, their derivatives, fluorinated incompletely condensed or open-cage POSSs (F-IC-POSSs), have similarly intriguing structures, but their utilization for polymer synthesis remains undeveloped. Herein, fluorinated network polymers were prepared based on a 3,3,3-trifluoropropyl-substituted IC-POSSs via hydrosilylation polymerization with isobutyl- and phenyl-substituted IC-POSS under optimized conditions. In addition to their good thermal stability and tunable refractive indices, these polymers exhibited solution processability and their casting films showed excellent optical transparency, indicating their potential for constructing fluorinated polymers. Their utilization as surface modifiers was examined by addition to poly(methylmethacrylate) (PMMA) films. Intriguingly, modified PMMA films with 2.0 and 0.5 wt% addition showed similar hydrophobicity and surface energies to the films prepared with only fluorinated network polymers.     

Biomimetic Zirconia with Cactus-Inspired Meso-Scale Spikes and Nano-Trabeculae for Enhanced Bone Integration

Biomimetic design provides novel opportunities for enhancing and functionalizing biomaterials. Here we created a zirconia surface with cactus-inspired meso-scale spikes and bone-inspired nano-scale trabecular architecture and examined its biological activity in bone generation and integration. Crisscrossing laser etching successfully engraved 60 μm wide, cactus-inspired spikes on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with 200–300 nm trabecular bone-inspired interwoven structures on the entire surface. The height of the spikes was varied from 20 to 80 μm for optimization. Average roughness (Sa) increased from 0.10 μm (polished smooth surface) to 18.14 μm (80 μm-high spikes), while the surface area increased by up to 4.43 times. The measured dimensions of the spikes almost perfectly correlated with their estimated dimensions (R² = 0.998). The dimensional error of forming the architecture was 1% as a coefficient of variation. Bone marrow-derived osteoblasts were cultured on a polished surface and on meso- and nano-scale hybrid textured surfaces with different spike heights. The osteoblastic differentiation was significantly promoted on the hybrid-textured surfaces compared with the polished surface, and among them the hybrid-textured surface with 40 μm-high spikes showed unparalleled performance. In vivo bone-implant integration also peaked when the hybrid-textured surface had 40 μm-high spikes. The relationships between the spike height and measures of osteoblast differentiation and the strength of bone and implant integration were non-linear. The controllable creation of meso- and nano-scale hybrid biomimetic surfaces established in this study may provide a novel technological platform and design strategy for future development of biomaterial surfaces to improve bone integration and regeneration.