Acoustic echo-canceler using the FBAF algorithm

An acoustic echo-canceler for teleconferencing systems is realized based on the frequency bin adaptive filtering (FBAF) algorithm. In the FBAF algorithm, each frequency bin does an independent adaptive filtering, so that parallel processing can be used to increase the throughput of the system. Hardware size can be reduced to about 25% of the FIR time domain adaptive filter (TDAF) requirement. The realized echo canceler allows a comfortable conversation with only 8 ms of delay. The hardware prototype contains 12 VSP chips and one DSP chip, An ERLE (echo return loss enhancement) of 30 dB was achieved using this prototype hardware for an echo reverberation path with 260 ms delay. An efficient method for normalizing the convergence factor of the FBAF algorithm with a correlated input signal is given that speeds up the convergence rate. The performance is shown by computer simulation     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

A 64-Mb DRAM with meshed power line

A 64-Mb dynamic RAM (DRAM) has been developed with a meshed power line (MPL) and a quasi-distributed sense-amplifier driver (qDSAD) scheme. It realizes high speed, t_RAS=50 ns (typical) at V_cc=3.3 V, and 16-b input/output (I/O). This MPL+qDSAD scheme can reduce sensing delay caused by the metal layer resistance. Furthermore, to suppress crosstalk noise, a V_SS shield peripheral layout scheme has been introduced, which also widens power line widths. This 64-Mb DRAM was fabricated with 0.4-μm CMOS technology using KrF excimer laser lithography. A newly developed memory cell structure, the tunnel-shaped stacked-capacitor cell (TSSC), was adapted to this 64-Mb DRAM     

DNA-inorganic hybrid material as selective absorbent for harmful compounds

Double-stranded DNA is one of functional polymers, but the large amounts of DNA sources, such as salmon milt and shellfish gonads, have been discarded as industrial wastes. Therefore, conversion of this discarded DNA to be a useful material would be beneficial to utilize the unique property of DNA. These materials including DNA have been prepared by mixing with the organic polymers, such as alginic acid, collagen, and chitosan. However, since these materials have consisted from entirely organic components, these do not have the mechanical strength for a material. So, we prepared the organic-inorganic hybrid materials by mixing DNA with silane coupling reagents bis(trimethoxysilylpropyl)amine or bis[(3-trimethoxysilyl)propyl]ethylenediamine. These hybrid materials with the flexibility were water-insoluble and resistant to hydrolysis by nuclease. In addition, the mechanical strength of this hybrid material was approximately twice as high as that of DNA without mixing with silane coupling reagents. Furthermore, the double-stranded DNA in the hybrid materials has been maintained in a B-form structure in aqueous solution. Thus, we demonstrated the utilization of DNA as a functional material. As a result, this material could selectively accumulate harmful DNA-intercalating compounds with the planar structure, such as dibenzo-p-dioxin, dibenzofuran, and ethidium bromide. Organic-inorganic hybrid material including double-stranded DNA has potential to serve as a useful biomaterial for medical, engineering, and environmental applications.     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

CD1 expression defines subsets of follicular and marginal zone B cells in the spleen: beta 2-microglobulin-dependent and independent forms

We have used multicolor FACS analysis, immunohistology, and functional assays to study the expression of CD1 on B cell subsets from normal and beta 2m-/- mice. Two B cell subpopulations were identified that express high levels of CD1 in normal mice: splenic marginal zone B cells (IgMhigh IgDlow CD21high CD24intermediate CD23- CD43-) and a newly identified subpopulation of follicular B cells. The latter cells are unusual, because they are IgDhigh CD23+, like follicular B cells, but express high levels of CD21 and IgM, an expression pattern that is associated with marginal zone B cells. Therefore, the high-level expression of CD1 and CD21 was found to be closely associated on splenic B cells. Immunohistology confirmed the expression of CD1 on marginal zone B cells and on clusters of B cells in splenic follicles. Both the high-level CD1 expression by these cells and the low-level CD1 expression by subpopulations of B cells in the spleen, lymph node, peritoneal cavity, and bone marrow were markedly reduced in beta 2m-/- mice. Despite this, a CD1-restricted T cell clone proliferated vigorously in response to LPS-activated spleen cells that had been obtained from both beta 2m-/- and wild-type mice. This response was inhibited by the 3C11 anti-CD1 mAb. These results show the heterogeneity of B cell subsets in their expression of the beta 2m-dependent form of CD1. They further suggest that a beta 2m-independent form of CD1 is expressed on B cells that can stimulate T cells; however, this form is not easily visualized with the anti-CD1 mAb used here.     

The formation or the reduction of a disulfide bridge on the gamma subunit of chloroplast ATP synthase affects the inhibitory effect of the epsilon subunit

We have studied the change of the catalytic activity of chimeric complexes that were formed by chloroplast coupling factor 1 (CF1) -gamma, alpha and beta subunits of thermophilic bacterial F1 after formation or reduction of the disulfide bridge of different gamma subunits modified by oligonucleotide-directed mutagenesis techniques. For this purpose, three mutant gamma subunits were produced: gamma Delta194-230, here 37 amino acids from Pro-194 to Ile-230 are deleted, gammaC199A, Cys-199 is changed to Ala, and gamma Delta200-204, amino acids from Asp-200 to Lys-204 are deleted. All of the chimeric subunit complexes produced from each of these mutant CF1-gamma subunits and alpha and beta subunits from thermophilic bacterial F1 lost the sensitivity against thiol reagents when compared with the complex containing wild-type CF1-gamma. The pH optimum (pH 8.5-9.0) and the concentration of methanol to stimulate ATPase activities were not affected by these mutations. These indicate that the introduction of the mutations did not change the main features of ATPase activity of the chimeric complex. However, the interaction between gamma subunit and epsilon subunit was strongly influenced by the type of gamma subunit itself. Although the ATPase activity of the chimeric complex that contained gamma Delta200-204 or gammaC199A was inhibited by the addition of recombinant epsilon subunit from CF1 similarly to complexes containing the reduced wild-type gamma subunit, the recombinant epsilon subunit did not inhibit the ATPase of the complex, which contained the oxidized form of gamma subunit. Therefore the affinity of the epsilon subunit to the gamma subunit may be dependent on the state of the gamma subunit or the epsilon subunit may bind to the oxidized form of gamma subunit in a mode that does not inhibit the activity. The ATPase activity of the complex that contains gamma Delta194-230 was not efficiently inhibited by epsilon subunit. These results show that the formation or reduction of the disulfide bond on the gamma subunit may induce a conformational change in the region that directly affects the interaction of this subunit with the adjacent epsilon subunit.     

Mechanical behaviour of a combined joint composed of mechanical fastening and adhesive bonding

A study has been made of ‘combined’ joints consisting of mechanical fastening and adhesive bonding between rigid adherends. The mechanical characteristics of such ‘hybrid’ butt and lap shear joints have been derived by theoretical analysis. Results from experimental tests in combined joints giver reasonable agreement with the theoretical equations relating joint load to deformation.