Self-assembly of three dimensional micro mechanisms using thermal shrinkage of polyimide

This paper describes three-dimensional microstructures fabricated using a simple self-assembly process involving the thermal shrinkage of polyimide. The proposed method enables hinged structures to be automatically rotated out of the wafer plane and to remain bent without the need to use any interlocking mechanisms. The hinged structures were fabricated using surface micromachining techniques involving heating in a furnace. An increase in the bending angle due to the shrinkage of polyimide was observed with increasing heating temperature, heating time, and length of the polyimide hinge. Of these three parameters, the heating time was found to be the most suitable for precise control of the bending angle. Furthermore, microcubes were fabricated by this method and the self-assembly process was successfully visualized using a CCD camera.     

Spectral hole burning and carrier-heating effect on the transientoptical nonlinearity of highly carrier-injected semiconductors

An improved density-matrix theory is developed that can treat both spectral hole burning and carrier heating self consistently. Various intraband and interband relaxation terms characterized by different relaxation times and quasi-equilibrium distributions are introduced into the density-matrix equations within a relaxation-time approximation. Conservation of total number and energy densities of carrier systems in each band is considered to determine the quasi-equilibrium distributions. Formalism is applied to the calculation of the transient optical nonlinearity of highly carrier-injected semiconductors. Spectral hole burning and carrier-heating effects on the spectral and temporal characteristics are then clarified. In particular, the significant four-wave-mixing effect due to carrier heating is pointed out. An experiment that can be used to directly prove the existence of the carrier-heating effects on gain nonlinearity is also proposed     

Moderately high speed impact of two identical spheres

This paper deals with impacts between two identical spheres in moderately high speed range. Impact of spheres is one of basic problems in mechanical dynamics. Severity of impact is generally characterized by the coefficient of restitution. However, influence of material property on the coefficient of restitution has not been clarified yet. The authors previously investigated direct central impacts of two identical spheres in low speed range and revealed that strain rate sensitivity of material properties could not be ignored even in the low speed impacts. Therefore, this paper investigates the direct central impact of two identical spheres in higher speed range. The impact experiments were performed in range of impact speed 10 m/s–20 m/s by using air-gun setup. It was confirmed that the expressions for the coefficient of restitution and the contact time derived from the low speed impact remained effective in the moderately high speed range. Then numerical simulations by using Finite Element Method (F.E.M) have been carried out, in which the material properties and the strain rate effect were taken into account. The coefficient of restitution, contact time, sphere’s compression and contact circle diameter obtained by experiments and F.E.M. were compared and they matched well. Contact pressure distributions at maximum contact force were investigated. The contact pressure at sphere center varied little with impact speed but the contact pressure increased with impact speed near contact edge. Theoretical expression for prediction of the coefficient of restitution proposed by C. Thornton was examined to the experimental results of this study. To provide an accurate prediction, it is necessary to estimate the contact pressure depending on material properties. Finally, the Meyer analysis was applied to the case of this study and it was found that the Meyer’s law holds in the moderately high speed impact between two identical spheres.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.     

Glutamate-stimulated proliferation of rat retinal pigment epithelial cells

We investigated the effects of glutamate on cell proliferation and the expression of basic fibroblast growth factor (bFGF) and its receptor (FGF-R1) mRNA in cultured rat retinal pigment epithelial (RPE) cells. The number of primary RPE cells was significantly higher after treatment with 0.2 to 1.0 mM glutamate (maximum at 1.0 mM) for 7 days than in controls. Glutamate-stimulated cell proliferation was abolished by (+)-5-methyl-10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5,10-imine (MK-801), but not by 6,7-dinitroquinoxaline-2,3-dione or L(+)-2-amino-3-phosphonopropionic acid. Proliferation was increased to a similar extent by N-methyl-D-aspartate (NMDA), but not by kainate, alpha-amino-3-hydroxy-3-methyl-4-isoxazolepropionic acid or trans-(+/-)-1-amino-1,3-cyclopentanedicarboxylic acid. NMDA-receptor-like immunoreactivity was detected in most cells cultured. Treatment of cells with glutamate increased the level of bFGF mRNA and, to a lesser extent, that of FGF-R1 mRNA, which peaked 2 and 4 days, respectively, after glutamate was added. The increase in bFGF mRNA induced by glutamate was inhibited by MK-801. These findings suggest that glutamate might stimulate proliferation of RPE cells through activation of NMDA receptors and expression of bFGF and further suggest that glutamate may be involved in the proliferative changes of RPE cells in retinal wound healing.     

Intra-arterial preventive chemotherapy for residual liver after resection of hepatic metastasis from colorectal cancer

We treated 18 cases with intra-hepatic arterial infusion chemotherapy after resection of hepatic metastasis from colorectal cancer (June 1991-September 1997). Eight cases were H1, 7 were H2, and 3 were H3. Hepatic lobectomy was done in 3 cases, lobectomy + partial resection in 2 cases, and partial resection in 13 cases. All cases received high-dose intermittent 5-FU infusion (WHF = 5-FU 1,000 mg/m2/5 hrs/w) on an outpatient basis. The total frequency of WHF was 4-54 times (average 29), and total 5-FU doses ranged from 6.0 to 81.0 g (average 40 g). The 1- and 5-year cumulative survival rates were 100% and 77.5% in all patients 100% and 87.5% in H1 group and 100% and 64.3% in H2 + H3 group, respectively. There was no significant difference of survival between the H1 and H1 + H3 groups. The 1- and 5-year recurrence rates in residual liver were 5.9% and 14.4%, respectively. One of 2 cases with residual liver recurrence was resected for metastasis again, and the patient is now in a disease-free state. WHF after resection of hepatic metastasis from colorectal cancer has a preventive effect for their survival, not only in H1 group but also in H2 + H3 group.     

Abnormal development and differentiation of macrophages and dendritic cells in viable motheaten mutant mice deficient in haematopoietic cell phosphatase

In mice homozygous for the 'viable motheaten' (mev) mutation, numbers of macrophage progenitor cells, particularly monocytes, were markedly increased in the bone marrow and spleen. Increased mobilization of these precursor cells to peripheral tissues and their differentiation to macrophages were evidenced by striking increases in macrophage numbers. Immunohistochemical double staining of tissue sections and flow cytometry analyses of single cell suspensions from these mice demonstrated CD5 (Ly-1)-positive macrophages in the peritoneal cavity, spleen and other tissues. Ly-1-positive macrophage precursor cells were demonstrated in the peritoneal cavity of the mev mice and developed in the omental milky spots. The development of marginal metallophilic and marginal zone macrophages was poor in the splenic white pulp and related macrophage populations were absent in the other lymphoid tissues. The numbers of epidermal Langerhans cells in the skin and T cell-associated dendritic cells in the thymic medulla, lymph nodes, and the other peripheral lymphoid tissues were decreased. However, increased numbers of dendritic cells accumulated in the lungs, liver, and kidneys. These abnormalities in development and differentiation of macrophages and dendritic cells may be ascribed to the deficiency in haematopoietic cell SHP-1 tyrosine phosphatase or may be a secondary consequence of abnormal microenvironments, (either constitutive or in response to inflammatory stimuli) in the haematopoietic and lymphopoietic organs and tissues of these mice.     

Hydroboration copolymerization

Summary Organoboron copolymers were prepared by polyaddition of diene mixture or diene/diyne mixture, respectively, with thexylborane (1). When a mixture of dienes such as 1,2-diallyloxyethane (2a) and p-diallylbenzene (2b) was polymerized with 1, the peaks in GPC using both UV and RI detectors were shifted to higher molecular weight regions with the increase of the amount of 1. The molecular weight distribution of the copolymer obtained by this method indicated clear difference from that of a mixture of two homopolymers. On the other hand, when the poymerization between 1 and 1,7-octadiene (2c) was carried out in the presence of a trace amount of 1,7-octadiyne (4), the molecular weights of organoboron polymers were found to be increased when the ratio of 4/2c was increased.