A passive EMI filter with access to the ungrounded motor neutral line—Its effect on attenuating bearing current

This paper describes the effect of a passive EMI filter on preventing bearing current from flowing inside an inverter‐driven motor. Motor‐bearing damage is often caused by bearing currents resulting from the breakdown of grease films in the motor bearing. The high‐frequency common‐mode voltage generated by the PWM inverter induces a shaft voltage between the rotor and the frame. When the shaft voltage exceeds the breakdown voltage of the grease films, a destructive instantaneous discharge current with a peak value of about 1 A flows through the motor bearing. The passive EMI filter, which is unique in access to the motor neutral line, can reduce the shaft voltage as a result of eliminating the high‐frequency common‐mode voltage from the motor terminals. Hence, no breakdown occurs in the grease film, so that no bearing current flows. The viability and effectiveness of the passive EMI filter is verified by experimental results obtained from a 400‐V, 3.7‐kW laboratory system. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(2): 78– 87, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20489     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

Quantum Effects on Hydrogen Isotopes Adsorption in Nanopores

We have investigated the applicability of simulations and theoretical techniques for exploring the selectivities of hydrogen isotopes. We have simulated the adsorption isotherms of H₂ in an idealized carbon slit pore at 77 K by using the grand canonical Monte Carlo simulations with the Feynman-Hibbs effective potential (FH-GCMC) and the rigorous path integral method (PI-GCMC), and we obtained good agreement between the isotherms from both simulations. This suggests that FH-GCMC, which uses the approximative Feynman-Hibbs treatment, is as useful as PI-GCMC for exploring H₂ adsorption at 77 K. Moreover, we show that the ideal adsorption solution theory (IAST) can predict the selectivity of D₂ over H₂ in the interstices of single-wall carbon nanotube (SWNT) bundles at 77 K (below 0.1 MPa) very well by comparing the obtained results with the mixture adsorption FH-GCMC simulations. This indicates that IAST is also applicable to the estimation of the selectivity of D₂ over H₂ at moderate pressures and at 77 K from experimental single-component adsorption isotherms. We also demonstrate that the FH-GCMC simulation can reproduce the experimental adsorption isotherms of H₂ and D₂ in aluminophosphate AlPO₄-5 at 77 K. Finally, we analyze the selectivity of D₂ over H₂ by IAST with the experimental single-component adsorption isotherms of H₂ and D₂ at 77 K for a variety of adsorbents: AlPO₄-5, activated carbon fibers (ACFs), HiPco SWNT, and SWNHs. The selectivities predicted by the experimental adsorption data based on the results from the FH-GCMC simulations are presented and discussed.     

Production of lepidimoide by an endophytic fungus from polysaccharide extracted from Abelmoschus sp.: identification of the product and the organism producing it

A highly potent allelopathic factor, lepidimoide, was initially extracted from mucilage of germinated cress seeds. Polysaccharide extracted from okra (Abelmoschus esculentum Moench) is considered to have a similar structure to lepidimoide as its repeating unit. We therefore initiated the screening of enzymes capable of degrading okra polysaccharide into lepidimoide from endophytes. We discovered an endophytic fungal strain AHU9748 isolated from Coleus galeatus, which produced an oligosaccharide having similar properties to lepidimoide on thin layer chromatography. The physico-chemical data from ESI-MS, NMR spectra and other analyses also showed the purified product to be identical to lepidimoide. The strain AHU9748 was identified as a fungus belonging to the coelomycetes, closely related to the genus Colletotrichum, based on morphological characteristics and sequence analysis of the 18S rDNA and ITS region.     

Computational dynamics method for evaluating the mobility of charged biomolecules passing through the electrical potential field within the ion selective channel on an excitable membrane

A mathematical method is introduced to characterize the electrokinetic behavior (electrophoresis) of a biomolecular particle which passes through a specific channel pore on an excitable biological membrane. The basic approach was first proposed by Booth (1950). The system was described by an equation of continuity and an equation of motion in which the driving force involves the diffusion effect, the hydrostatic pressure, and the electrostatic potential. By assuming linear relations between the velocity and the applied electrical field, solutions for the potential, pressure, and velocity were given by a series expansion of the charges on the particle. To examine the influence of ions surrounding the particle and forming an ionic cloud, the Debye–Huckel parameter was introduced. As the thickness of the double layer around the particle increased, the potential, velocity, pressure, and viscosity were changed significantly. The maximum influence was obtained when the radius of the particle became equal to the thickness of the double layer. Although this theory is valid for a charged, spherical, nonconducting particle only, the method is available for evaluating the kinetic behavior of a biomolecule that passes through a channel pore on a cellular membrane.This work was presented, in part, at the 8th International Symposium on Artificial Life and Robotics, Oita, Japan, January 24–26, 2003     

Laser Thomson scattering and optical emission studies of striated PDP micro‐discharge plasmas

Abstract— Properties of a plasma‐display‐panel (PDP) like discharge were examined by emission and laser Thomson scattering (LTS) measurements. Emission measurements were performed using an intensified CCD camera. By varying several external parameters such as the amplitude of the input voltage, gas composition, and pressure, the influence of these parameters on the discharge behavior was studied. Results of emission measurements showed that they were in good agreement with similar emission measurements on real PDP cells. LTS measurements were performed for the striated PDP‐like discharge at a pressure of 100 Torr and the results showed clear modulations in both profiles of electron density and electron temperature.     

Self-assembly of nano-sized arrays on highly oriented thin films of poly(tetrafluoroethylene)

Self-assembly of nano-sized arrays by casting a dilute solution of a guest material on the friction-transferred poly(tetrafluoroethylene) (FT-PTFE) substrate was newly discovered. Long axis of the rod-like structures forming the arrays is aligned perpendicular to the chain direction of FT-PTFE, and accordingly, the arrays are highly anisotropic. This phenomenon was observed for aqueous or organic solutions of polymers or organic materials. Each rod-like structure forming the arrays is composed of small grains. The arrays in question are formed regardless to the crystallinity of the guest materials. The formation mechanism of the nano-sized arrays is still unclear. However, we guess that they are formed as a result of microscopic flow pattern at the edge of the solution film. The arrays in question may be a new type of dissipative structure.     

Effects of excess K+ on carbachol-induced contractions in the guinea-pig tracheal muscle

1. In smooth muscles isolated from the guinea-pig trachea, the effects of dihydropyridines, nifedipine and nicardipine on contractions produced by carbachol (Cch) were studied in normal (6 mM) and excess K+ concentration (60 mM). The tonic contraction produced by 1 microM Cch was highly dependent on the external Ca2+ concentration ([Ca2+]0) and was not significantly affected by cyclopiazonic acid or thapsigargin, Ca2+ uptake inhibitor. 2. [Ca2+]0-tension curves were steeper in the presence of 1 microM Cch (the Hill coefficient: 2.5) than in the presence of 60 mM K+ (Hill coefficient: 1.6) and their ED50 of Ca2+ was 0.16 and 0.39 mM, respectively. An increase of K+ to 60 mM in the presence of 1 microM Cch shifted the curve to the left roughly in parallel (ED50: 0.12 mM, Hill coefficient: 2.3). 3. [Ca2+]0-tension curve in the presence of 1 microM Cch was shifted to the right in parallel by nifedipine (1 microM). This was markedly potentiated by 60 mM K+ (the increase in ED50 of Ca2+ being 3 times at 6 mM and 15 times at 60 mM K+). No tension was evoked by Ca2+ up to 2.5 mM in 60 mM K+ solution containing 1 microM nifedipine but no Cch. 4. In the absence of nifedipine, Cch-induced contractions were potentiated by 60 mM K+, whereas in the presence of nifedipine, Cch-induced contractions were markedly inhibited by 60 mM K+. These mechanical changes were accompanied by an increase or a decrease in intracellular Ca2+. 5. A hypothesis is presented to explain the results which suggests that the kinetics of Ca2+ influx though a single type of pathway is modulated by membrane potential and receptor activation and that the susceptibility of the pathway to dihydropyridine blockade is closely related to the Ca2+ influx kinetics with receptor activation reducing and membrane depolarization increasing the susceptibility.