Analytical approach with Laplace transform to the inverse problem of one‐dimensional heat conduction transfer: Application to second and third boundary conditions

An analytical method using Laplace transformation has been developed for one‐dimensional heat conduction. This method succeeded in explicitly deriving the analytical solution by which the surface temperature for the first kind of boundary condition can be well predicted. The analytical solutions for the surface temperature and heat flux are applied to the second and third of the boundary conditions. These solutions are also found to estimate the corresponding surface conditions with a high degree of accuracy when the surface conditions smoothly change. On the other hand, when these conditions erratically change such as the first derivative of temperature with time, the accuracy of the estimation becomes slightly less than that for a smooth condition. This trend in the estimation is similar irrespective of any kind of boundary condition. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(1): 29–41, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10069     

Dynamical Transition of 4He Crystallization in a Very High Porosity Aerogel

Crystallization of ⁴He in aerogels of 90 and 96% porosities shows a dynamical phase transition at around 600 mK due to the competition between thermal fluctuation and disorder: crystals grow via creep at high temperatures and via avalanche at low temperatures. In a very high porosity 99.5% aerogel, however, the transition had not been observed in our previous publication (Nomura et al. in Phys. Rev. Lett. 101:175703, 2008). We improved the spatial resolution of the video image and found that the 99.5% aerogel did have the transition at around 200 mK, which is much lower than those of the lower porosities. The avalanche size is significantly smaller in the 99.5% aerogel. The reduction in the transition temperature and avalanche size may be the consequence of weaker disorder for the crystallization in the very high porosity aerogel.     

亚洲城市主义——公共街道中住区生活的动态性之解读

针对亚洲文脉下的高密度城市环境,提出“亚洲城市主义”作为一种新的研究和设计模式,并提出“一席之地”的概念作为环境设计中的焦点。研究关注的是“街道社会生态”,特别是在某一时刻街道上循环的事物、活动和空间结构的一幕最小的互相依赖图景,称作“社会即景”,倡导为高密度城市环境作契合文化内涵的设计。     

Subsurface damage of single crystalline silicon carbide in nanoindentation tests

The response of single crystalline silicon carbide (SiC) to a Berkovich nanoindenter was investigated by examining the indents using a transmission electron microscope and the selected area electron diffraction technique. It was found that the depth of indentation-induced subsurface damage was far larger than the indentation depth, and the damaging mechanism of SiC was distinctly different from that of single crystalline silicon. For silicon, a broad amorphous region is formed underneath the indenter after unloading; for SiC, however, no amorphous phase was detected. Instead, a polycrystalline structure with a grain size of ten nanometer level was identified directly under the indenter tip. Micro cracks, basal plane dislocations and possible cross slips were also found around the indent. These finding provide useful information for ultraprecision manufacturing of SiC wafers.     

Development of ‘UR-System 2’: a training system for recovery of motor function of plegic upper limb after stroke

We developed a new training system, called ‘UR-System 2’, for the recovery of motor function of a plegic upper limb after stroke. UR-System 2, which was redesigned based on knowledge gained from clinical tests using UR-System 1, was newly equipped with a function for testing the motor function of patients, such as isolated movement. In order to verify the effectiveness of UR-System 2, we conducted the following procedures: we verified the safety of training in healthy persons; we gathered standard data on pronation and supination of healthy forearms during tests; and, we verified that the test function was effective in evaluating the recovery effect of isolated movement in two hemiplegic patients.     

Magnetization Curve of Second Layer Anti-Ferromagnetic Solid 3He on Graphite

Two dimensional anti-ferromagnetic solid ³He on graphite in the so called 4/7 phase is a highly frustrated quantum spin system and its ground state is considered to be a gapless spin liquid. To investigate the detailed magnetic behavior, the magnetization curve has been measured below 1 mK in high magnetic fields, by use of NMR over a wide frequency range up to 84 MHz. The magnetization of the 4/7 phase seems to have a plateau at half the saturation magnetization, which is not inconsistent with results obtained with a double gradient Faraday magnetometer.      

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Expression of endothelial and inducible nitric oxide synthase in human glomerulonephritis

The presence of nitric oxide (NO) in the kidney has been implicated in the pathogenesis of human glomerulonephritis. However, the exact type of glomerular cells that express NO synthase (NOS) and the NOS isoform involved in the local production of NO has not been identified in the human diseased kidney. We examined the expression of three isoforms of NOS, inducible NOS (iNOS), endothelial NOS (eNOS) and brain NOS (bNOS) in the renal tissue of patients with IgA nephropathy (IgAN, N = 10), lupus nephritis (LN, N = 5), membranous nephropathy (MN, N = 5) and minimal change nephrotic syndrome (MCNS, N = 5). Sections were immunostained and the correlation between the expression of each NOS and the degree of glomerular injury in that section was also examined. Normal portions of surgically resected kidneys served as controls. eNOS was present in glomerular endothelial cells and endothelium of cortical vessels in the control and diseased kidneys. iNOS was localized in mesangial cells, glomerular epithelial cells and infiltrating cells in the diseased glomeruli, whereas immunostaining for iNOS was hardly detected in control kidneys. In addition, the expression pattern of eNOS in each glomerulus was the reverse of that of iNOS. In IgAN and LN, the extent of staining for eNOS correlated negatively with the degree of glomerular injury, while the extent of staining for iNOS correlated positively with the degree of glomerular injury in the same tissues. bNOS was not detected in normal or nephritic glomeruli. Our results indicate the presence of a NO pathway in human diseased kidney, and suggest that NO derived from eNOS and iNOS may be involved in the progression of renal diseases and that NO derived from each NOS may play an important role in different way in human inflamed glomeruli.     

A voltage-source PWM rectifier-inverter with feedforward control of instantaneous power

In general, diode rectifiers with electrolytic capacitors on the dc side have been used as dc power supplies for voltage-source inverters. Rectifiers of this type, however, cause many problems such as poor power factor and harmonics. Recently, voltage-source PWM rectifier-inverters have been studied to provide the following advantages: (1) harmonic-free on both ac sides; (2) unity power factor on the input ac side; (3) power flow of either direction or power regeneration; (4) reduction of the dc capacitor. However, it is difficult for a conventional voltage-source PWM rectifier-inverter to regulate the capacitor voltage on transient states because it has only a voltage feedback loop. This paper describes a voltage-source PWM rectifier-inverter with feedforward control of instantaneous power. Based on the pq theory, the instantaneous power which is calculated in the control circuit of the inverter is fed forward to the control circuit of the rectifier. The feedforward control of instantaneous power contributes greatly to sufficiently suppress voltage fluctuation of the dc capacitor on transient states. Transient characteristics are discussed, and some interesting experimental results of a laboratory model are shown.     

Solid dispersion particles of tolbutamide prepared with fine silica particles by the spray-drying method

Solid dispersion particles of tolbutamide (TBM) were prepared by formulating nonporous (Aerosil 200 (hydrophilic), Aerosil R972 (hydrophobic)) or porous (Sylysia 350 (hydrophilic), Sylophobic 200 (hydrophobic)) silica as a carrier and applying the spray-drying (SD) or evaporation (Eva) method. In the solid dispersion particles prepared by the SD method, TBM existed in a meta-stable form (Form II) irrespective of the type of silica. On the other hand, when the Eva method was used, various crystalline forms of TBM were observed in the solid dispersion particles according to the type of silica. Polymorphs of Forms III and IV were prepared with Aerosil 200 and Aerosil R972, respectively, while crystalline Form II was obtained when either of the forms of porous silica, Sylysia 350 or Sylophobic 200, was formulated. The dissolution property of TBM in the solid dispersion particles prepared with hydrophilic silica was remarkably improved compared with those of the original TBM crystals (Form I) or spray-dried TBM without silica (Form II). In the case of hydrophobic silica, the release rate of TBM from the solid dispersion particles was much slower than that of original TBM. The meta-stable form of TBM in the solid dispersion particles was stable for at least 4 weeks when stored at 60 °C and 0% RH, while the spray-dried TBM without silica (Form II) was gradually converted to the stable form (Form I) under the same storage conditions. Under the humid storage conditions (60 °C, 75% RH), the spray-dried TBM without silica (Form II) immediately converted into the stable form (Form I) within 1 day, while TBM (Form II) in the solid dispersions in a matrix of silica was stable for at least 1 week.