Antenna-gain measurement of handheld terminals at 900 MHz

This paper presents antenna-gain measurements of handheld terminals by the random-field measurement (RFM) method. We have measured the relative antenna gain for different-sized terminal boxes in indoor and outdoor environments to show a gain decrease caused by the box size. The measured results are explained by calculating the average gain of the horizontal radiation pattern. To find the effect by a different human carrier, we also measured the antenna gain for several parameters, such as weight, height, head parameters, and the antenna protruding length from the head. We present a correlation factor of the antenna-gain deviation due to different human carriers     

Intentional side etching to achieve low-noise GaAs f.e.t.

A very-low-noise 0.5 ?m-gate GaAs f.e.t. is realised by using intentional side etching of an Au/Ti double layer as the Schottky-gate metal. At 12 GHz, the minimum noise figure is 2.1 dB, with 7.6 dB associated gain at a bias of VD = 4 V, ID= 10 mA. Maximum stable gain is 14 dB at VD = 4 V, ID = 30 mA.     

Generating material strength standards of aluminum alloys for research reactors I. Yield strength values Sy and tensile strength values Su

Aluminum alloys are frequently used as structural materials for research reactors. The material strength standards, however, such as the yield strength values (S_y), the tensile strength values (S_u) and the design fatigue curve—which are needed to use aluminum alloys as structural materials in “design by analysis”—for those materials have not been determined yet. Hence, a series of material tests was performed and the results were statistically analyzed with the aim of generating these material strength standards. This paper, the first in a series on material strength standards of aluminum alloys, describes the aspects of the tensile properties of the standards. The draft standards were compared with MITI no. 501 as well as with the ASME codes, and the trend of the available data also was examined. It was revealed that the draft proposal could be adopted as the material strength standards, and that the values of the draft standards at and above 150°C for A6061-T6 and A6063-T6 could be applied only to the reactor operating conditions III and IV. Also the draft standards have already been adopted in the Science and Technology Agency regulatory guide (standards for structural design of nuclear research plants).     

Application of the finite element method to minimum mass design of a bar with two specified natural frequencies

In the first part of the present paper, a problem of minimum mass design of a bar with two specified longitudinal natural frequencies is treated. A discussion is given to whether the bar thus optimally designed has any other natural frequencies between the two specified natural frequencies or not. In the second part of the paper, an extension is made to a problem in which some inequality constraints on the mass distribution are also imposed. Optimality conditions for the inequality constraints are presented.These problems are formulated by the use of the finite element method. The Newton-Raphson method is employed to solve the necessary conditions for optimality. A computational algorithm is developed. Some numerical results are shown.     

Fluctuation phenomena below the superconducting transition

The fluctuation propagator for the superconducting order parameter belowT _c is derived for a gapless superconductor. The fluctuation of the order parameter consists of two distinct modes: the fluctuations of the phase and the modulus of the order parameter. The former fluctuation obeys a phononlike dispersion, while the latter fluctuation is described by a damping diffusion type equation. The present theory gives an account of the fluctuation-induced Josephson effect belowT _c observed recently by Carlson and Goldman.     

Proposals for wastewater treatment by applying flocculating activity of cross-linked poly-gamma-glutamic acid

Cross-linked poly-gamma-glutamic acid (C-L gamma-PGA) markedly purified polluted water collected from rivers and ponds by flocculation and precipitation. This effect of C-L gamma-PGA occasionally required pretreatment with polyaluminum chloride (PAC). Components of polluted water in rivers or ponds are generally thought to be clay minerals, microorganisms and chemical compounds. In this study, the flocculating activities of C-L gamma-PGA against suspensions of bentonite, diatomaceous earth, Escherichia coli and Mycrocystis aeruginosa, and against solutions of crystal violet and bisphenol A were investigated. The mode of action of C-L gamma-PGA is thought to be based on electrostatic interaction between flocculants, C-L gamma-PGA and PAC, and the surface of polluted water components, which may lead to neutralization of the zeta-potential of those components.     

Synthesis of a photoimmobilizable histidine polymer for surface modification

A novel photoreactive polymer with histidine polar groups was synthesized through the copolymerization of two types of methacrylic acid, one carrying histidine groups and the other carrying azidoaniline groups. The polymer was photoimmobilized on polyester disks for surface modification. The effect of the surface modification on the hydrophilic and biofouling properties was investigated. Static contact angle measurements showed that the polymeric surface was modified to be comparatively hydrophilic in the polymer‐immobilized region. Micropattern immobilization was carried out with a photolithographic method. Atomic force microscopy measurements showed that the polymer was formed on the disks in response to ultraviolet irradiation. Protein adsorption was reduced on the polymer‐immobilized regions, and in those regions, spreading and adhesion of mammalian cells were reduced in comparison with that in nonimmobilized regions. In conclusion, a novel histidine‐containing polymer was photoreactively immobilized on a conventional polymer surface, and it had reduced interaction with proteins and cells. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009