Fabrication of TiO2–SiO2 Photonic Crystals with Diamond Structure

Ceramic photonic crystals with diamond structure were fabricated using stereolithography and successive sintering. The green body of an epoxy resin incorporating 10 vol% TiO₂–SiO₂ was formed by stereolithography and then heated in air at 1100°–1400°C for 2 h. The sintered products maintained the diamond structure with a linear shrinkage ratio of about 57% and a porosity of 38%. The ceramic photonic crystal with eight unit cells showed a photonic band gap at the center frequency of 23.5 GHz. This fabrication method of three-dimensional (3D) ceramic photonic crystals is applicable to other 3D structural ceramics and does not require any molding techniques.     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

Formation of phase structure and crystallization behavior in blends containing polystyrene–polyethylene block copolymers

The microphase separation structure in the molten state and the structure formation in crystallization from such ordered melt were investigated for the blends of polystyrene–polyethylene block copolymers (SE) with polystyrene homopolymer (PS) and polyethylene homopolymer (PE) and for the blends consisting of two kinds of SE with different copolymer compositions from each other, using synchrotron small-angle X-ray scattering techniques (SAXS). The copolymer compositions of SE block copolymers employed were 0.34, 0.58 and 0.73 wt. fraction of PE, and their melt morphologies were cylindrical, lamellar and lamellar, respectively. Macrophase separation or the morphology change in the melt occurred depending on the molecular weight and the blend composition, as reported so far. In crystallization from such macrophase-separated and microphase-separated melts, the melt morphology was completely kept for all the blends. Crystallization behavior was also investigated for the blends. The crystallization within the spherical and cylindrical domains surrounded by glassy PS was not observed for SE/PS blends. In the crystallization from the macrophase-separated melt, two exothermal peaks were observed in the DSC measurements, while a single peak was observed for other blends. For the blends with PS, the degree of crystallinity was depressed and the apparent activation energy of crystallization was high, compared to those for the corresponding neat SE. For SE/PE and SE/SE blends, those were changed depending on the blend composition.     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Experimental analyses for electronic structure of barium zirconate-strontium zirconate proton-conducting solid solution

In proton-conducting oxides, analyses for their electronic structure contribute to the understanding of interactions between defects in them. In this study, electronic band alignment of (1−x)BaZr_0.8Y_0.2O_3−δ(BZY)–xSrZr_0.95Y_0.05O_3−δ(SZY) proton-conducting solid-solution system (BSZY) which has high defect concentration and the deep valence band is experimentally investigated. By using thin-film specimens for optical absorption measurements, absorption edges derived from electron transition from the valence band to the conduction band which was insensitive to the proton incorporation were clearly observed in spite of the high defect concentration. The obtained optical band gap energy increased from 5.61 to 5.89 eV with increasing x, which was consistent with a composition dependence of Zr(Y)O₆ octahedral tilting. Ultraviolet photon-yield spectroscopy (UV-PYS) measurements under vacuum condition revealed that BZY and SZY had ionization energy of 6.98 and 7.31 eV, respectively, and thus the absolute energy levels of the valence band maximum and the conduction band minimum of BSZY were experimentally clarified. We propose that the combination of the optical absorption measurements using thin-film specimens and the UV-PYS measurements under vacuum condition is effective in evaluating fundamental electronic structures of proton-conducting oxides.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

Predicting viewer-perceived activity/dominance in soccer games with stick-breaking HMM using data from a fixed set of cameras

We attempted to predict activity/dominance for soccer games, where activity is defined as the degree of activity of the game as perceived by the viewer, whereas dominance is the degree at which the viewer perceives a particular team to dominate over the other team. Such activity/dominance information would help a layman viewer understand the game. It would also enable construction of an automatic digest creation system that extracts scenes having high activity/dominance. There are two facets of this study: 1. The main part of the underlying prediction model consists of a Stick-Breaking Hidden Markov Model, where the data automatically estimates the number of states of the Markov process behind the data. 2. The data used in this paper is vector time-series data consisting of player, referee, and ball positions, together with team information, acquired by a set of fixed cameras. The problem was approached with a Bayesian framework where learning and prediction were implemented by three different methods: Markov Chain Monte Carlo, Expectation Maximization, and Variational Bayes. The proposed method was tested using a dataset consisting of 10 professional soccer games and was compared against standard regression methods.     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

High‐pixel‐rate grating‐light‐valve laser projector

Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed.