Band Gap Modification of Diamond Photonic Crystals by Changing the Volume Fraction of the Dielectric Lattice

Photonic crystals with a diamond structure of epoxy lattices in which TiO₂-based ceramic particles are dispersed were fabricated by stereolithography. The periodicity of the lattice was designed to reflect electromagnetic waves in the gigahertz range. The volume fraction (β) of the dielectric lattice medium was modified from 14% to 33% by changing the rod diameter of the lattice. The photonic band gap was observed along Γ-L 〈111〉, Γ-X 〈100〉, and Γ-K 〈110〉 directions and the complete photonic band gap was formed at over β= 20%. The width of the forbidden gap increased gradually when the β increased over 14%, and reached 2.4 GHz at β= 33%. These results agreed with the band calculation using the plane wave expansion method.     

Fracture behavior of core‐shell rubber–modified clay‐epoxy nanocomposites

Morphology and fracture mechanisms in two nanoclay‐filled epoxy systems were investigated using both microscopy and spectroscopy tools. Clay exfoliation was achieved using a series of sample preparation steps, and confirmed using wide angle X‐ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. Significant improvement in modulus was obtained when clay exfoliation was achieved. Incorporation of core‐shell rubber (CSR) in both caly‐filled epoxy systems leads to greatly enhanced fracture toughness. Optical microscopy and TEM observations of the CSR‐modified nanocomposites suggest that CSR cavitation. shear yielding of the matrix, clay layer delamination. CSR bridging, crack bifurcation. and crack deflection are among the operative toughening mechanisms observed, depending on the nature of the epoxy matrix utilized.     

Grazing-incidence wide-angle X-ray diffraction study on molecular aggregation state of imprinted polyimide film before and after hard baking

Nanoimprint lithography (NIL) was carried out on precursor of polyimide (PI), poly(amic acid) film, and then hard baking to obtain imprinted PI film. The molecular aggregation states of imprinted PI films before and after hard baking were investigated by grazing-incidence wide-angle X-ray diffraction comparing with the one of flat PI film. It was found that NIL and hard baking can strongly affect the molecular aggregation states of PI film. Before hard baking, PI chain is aligned parallel to the line direction on the line. After hard baking, the alignment in ordered domain was changed to that the PI molecule of which chain axis is perpendicular to the line direction is significantly increased, while, PI molecule of which chain axis is parallel to the line direction is decreased after hard baking. Through comparing with the flat PI, crystallinity of imprinted PI film has been significantly enhanced.     

Humido-sensitive conducting polymer films and applications to linear actuators

Free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) with various PSS contents were newly prepared by casting water dispersion of the PEDOT/PSS colloidal particles in the presence of an extra PSS. Electrical conductivity, morphology, water vapor sorption, and electro-active polymer actuating behavior of the resulting films were investigated by means of four-point method, atomic force microscope (AFM), sorption isotherm, and electromechanical analyses. The maximum contraction of the film by application of an electric field increased with increasing both PSS content and relative humidity (RH), where the value attained 7% at 70% RH for the film with 93% of PSS. Since the isothermal sorption curve of the film was less dependent on the PSS content, the significant increase of the film contraction was explained by two mechanisms: (i) the extra PSS prevented from hydrogen bonding between adjacent PEDOT/PSS particles that suppressed dimensional changes of the film; and (ii) the higher the RH, the larger the degree of water vapor sorption, which led to the large film contraction by desorption of water vapor via Joule heating. On the basis of this phenomenon linear actuators utilizing PEDOT/PSS films were successfully developed and applied to leverage actuator and Braille cell.     

Preparation of π-conjugated polymers consisting of 1-aminopyrrole and 4-amino-1,2,4-triazole units

π-Conjugated polymers based on 1-aminopyrrole and 4-amino-1,2,4-triazole were prepared. Pd-catalyzed organometallic polycondensation gave poly(arylene-ethynylene) (PAE)-type π-conjugated polymers consisting of BOC-protected 4-amino-1,2,4-triazole (Taz(BOC)) units (BOC = t-butoxycarbonyl). The number average molecular weights (M_n) were determined to be 5200–19,200 using GPC. An alternating copolymer of Taz(BOC) and bithiophene (Th–Th) units, P(Taz(BOC)-Th-Th)_n-Pd, with an M_n of 10,800 was also prepared by Pd-catalyzed organometallic polycondensation. (Taz(BOC)-Th-Th)_n-Pd showed a UV–Vis absorption peak at λ_max = 425 nm, which is reasonable for a π-conjugated five-membered ring polymer with a coplanar structure. The deprotection of the BOC group of the polymers proceeded at 200 °C; this BOC-deprotection was investigated using a model compound. The optical and electrochemical properties of the π-conjugated polymers are reported.     

Piezoelectric properties of langasite group based on the ionic size of cation

As langasite A₃BC₃D₂O₁₄ compounds group with piezoelectric properties has no phase transition up to the melting point of 1400–1500 °C, they have been applied for the combustion pressure sensor. As they also have a larger electromechanical coupling factor compared to quartz and nearly the same temperature stability as quartz, the surface acoustic wave (SAW) filters are expected based on the digital transformation of wider bandwidth and higher-bit rates. In the case of three-element compounds such as [R₃]_A[Ga]_B[Ga₃]_C[GaSi]_DO₁₄ (R=La, Pr and Nd), the piezoelectric constant increases with the ionic radius R. In the case of four-element compounds such as [A₃]_A[B]_B[Ga₃]_C[Si₂]_DO₁₄ (A=Ca or Sr, B=Ta or Nb), |d₁₁| and k₁₂ values as a function of A_L/B_L ratio showed a linear relationship completely. There are two effects for the substitutions of A- and B-site cations: the substitution of Sr for Ca brings expansion toward [100] and enlargement in |d₁₁| and k₁₂. On the other hand, as the substitution of Ta for Nb brings not much change, the properties are similar. In this study, five-element compounds such as La_3?xSr_xTa_yGa_5?x+ySi_1+x?2yO₁₄ (0≤x≤3, 0≤y≤1) solid solutions analysed by a single crystal X-ray diffraction are compared with the three- and four-element compounds on the coordinates of oxygen ions. As the coordinates positions are located on the extended line of coordinate positions on the three-element compounds as increasing ionic radius of R-ions in A-site, the piezoelectric properties |d₁₁| and k₁₂ are expected become large.     

Fabrication of TiO2–SiO2 Photonic Crystals with Diamond Structure

Ceramic photonic crystals with diamond structure were fabricated using stereolithography and successive sintering. The green body of an epoxy resin incorporating 10 vol% TiO₂–SiO₂ was formed by stereolithography and then heated in air at 1100°–1400°C for 2 h. The sintered products maintained the diamond structure with a linear shrinkage ratio of about 57% and a porosity of 38%. The ceramic photonic crystal with eight unit cells showed a photonic band gap at the center frequency of 23.5 GHz. This fabrication method of three-dimensional (3D) ceramic photonic crystals is applicable to other 3D structural ceramics and does not require any molding techniques.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.