Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Temperature dependence of cyclic creep behavior of a Cu–SiO2 bicrystal with a [0 1 1] 20° twist boundary

Temperature dependence of cyclic creep behavior has been studied using a Cu bicrystal containing dispersed SiO₂ particles and a [0 1 1] 20° twist boundary. Failure occurred at shorter times with increasing temperature and stress amplitude. The fracture-mode of the bicrystals changed sharply from transgranular to intergranular at a certain critical stress amplitude. The brittle intergranular fracture that occurred below the critical stress amplitude caused discontinuous life shortening. The observed fracture-mode change at the critical stress amplitude is discussed in relation to grain-boundary sliding and grain-boundary cracking.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

Trap Levels in Eu and other Rare‐Earth Ions Codoped CaAl2O4 Phosphors

Photoluminescence spectrum, trap depths, and densities of trapped carriers of CaAl₂O₄:Eu phosphor crystals doped with rare‐earth elements were studied using the thermally stimulated luminescence technique. Trap depths and densities of the specimens vary with rare‐earth elements doped as the auxiliary activators. Tm and Nd are found to be effective for the strong afterglow phosphorescence peaking at λ = 442 nm for several hours after the excitation. CaAl₂O₄:Eu phosphor crystals doped with Nd and Tm include high density of carriers trapped at E = 0.59 and 0.52 eV, respectively.     

Automatic Extraction of Rules for Anaphora Resolution of Japanese Zero Pronouns in Japanese–English Machine Translation from Aligned Sentence Pairs

This paper proposes a method to extract rules for the anaphora resolution of Japanese zero pronouns in Japanese–English MT from aligned sentence pairs. After aligned sentence pairs unsuitable for rule extraction because of analysis errors or free translations are automatically rejected, zero pronouns in the Japanese sentences and the English translation equivalents of their antecedents are extracted from the remaining Japanese and English aligned sentence pairs using ten hand-developed alignment rules. This method identifies all Japanese zero pronouns whose translation equivalents are not explicitly expressed in an English sentence, this method identifies these as unalignable. Then, resolution rules for the remaining zero pronouns are automatically extracted using the aligned pairs, equivalent word/phrase pairs extracted from the aligned sentence pairs, and the syntactic and semantic structures of the Japanese sentences. This method was implemented in a Japanese–English MT system, ALT-J/E. 98.4% of all pairs were automatically aligned correctly in a window test, and 94.0% in a blind test. Furthermore, extracted rules for zero pronouns with deictic references created automatically from sentence pairs correctly resolved 99.0% of the zero pronouns in a window test and 85.0% of the zero pronouns in a blind test.     

The study of activity median aerodynamic diameter using imaging plate technique for assessment of effective dose from radon and its decay products

The indoor workplace environment was evaluated for exposure to radon and its decay products at two Universities in two metropolises of Japan. The mean radon concentrations in Nagoya University (NU) and Hokkaido University (HU) were 16.7 Bq m(-3) and 18.0 Bq m(-3), respectively. Activity median aerodynamic diameter (AMAD) of particles at NU ranged from 172 nm approximately 205 nm and at HU from 186 nm approximately 300 nm. Estimated effective doses for five usual sites of NU by ICRP approach was 0.15 mSvy(-1) approximately 0.76 mSvy(-1) and by UNSCEAR approach was 0.05 mSvy(-1) approximately 0.24 mSvy(-1). The effective dose for the same of HU by ICRP 66 approach was 0.16 mSvy(-1) approximately 0.79 mSvy(-1) and by UNSCEAR 2000 approach was 0.05 mSv y(-1) to 0.26 mSv y(-1). The two approaches differs on an average by a factor 2.3- approximately 4.7. The AMAD of obtained particle size distribution at NU has an average total deposition of 23% in human respiratory tract and 20% at HU.     

Size Measurement of Polystyrene Latex Particles Larger than 1 Micrometer using a Long Differential Mobility Analyzer

We describe a newly constructed annular-type differential mobility analyzer (DMA) with an effective electrode length of 60 cm, which is longer than that of our original DMA (40 cm length). This long DMA was developed to extend the classification size of particles measuring up to 1.5 μm. As an application of this DMA, the mean diameters and standard deviations were determined for six samples of monodisperse polystyrene latex (PSL) particles ranging from 0.94 to 1.27 μm in nominal diameter. These PSL particles suspended in double-distilled water were aerosolized by a glass nebulizer and then introduced into the DMA. The mean diameters and standard deviations of these PSL particles were calculated by Ehara's method and compared with the nominal diameters and uncertainties. There was good correlation between the nominal diameters of these samples—particularly for recently certified samples—and the measured diameters. Classification of aerosol particles more than 1 micrometer in diameter using this DMA will be useful for many purposes.     

Selective formation of CH3OH in the photocatalytic reduction of CO2 with H2O on titanium oxides highly dispersed within zeolites and mesoporous molecular sieves

Highly dispersed titanium oxide catalysts have been prepared within zeolite cavities as well as in the zeolite framework and utilized as photocatalysts for the reduction of CO₂ with H₂O to produce CH₄ and CH₃OH at 328 K. In situ photoluminescence, ESR, diffuse reflectance absorption and XAFS investigations indicate that the titanium oxide species are highly dispersed within the zeolite cavities and framework and exist in tetrahedral coordination. The charge transfer excited state of the highly dispersed titanium oxide species play a significant role in the reduction of CO₂ with H₂O with a high selectivity for the formation of CH₃OH, while the catalysts involving the aggregated octahedrally coordinated titanium oxide species show a high selectivity to produce CH₄, being similar to reactions on the powdered TiO₂ catalysts. Ti-mesoporous molecular sieves exhibit high photocatalytic reactivity for the formation of CH₃OH, its reactivity being much higher than the powdered TiO₂ catalysts. The addition of Pt onto the highly dispersed titanium oxide catalysts promotes the charge separation which leads to an increase in the formation of CH₄ in place of CH₃OH formation.     

Comparative anatomy of the podocyte: A scanning electron microscopic study

The three-dimensional structure of the renal glomerular podocyte was comparatively analyzed with special reference to its cellular interdigitation. Kidneys of lampreys, carps, eels, xenopuses, bullfrogs, iguanas, rats, and rabbits were used as materials. Urinary and basal surfaces of podocytes were exposed by a conventional freeze-fracture method and by NaOH maceration, respectively, and subsequently examined by scanning electron microscopy. In accordance with previous reports, each podocyte consisted of a round cell body protruding into Bowman's space, four to six major processes embracing glomerular capillary, and numerous pedicels on both sides of the major processes. The podocyte pedicels exhibited uniform needle-like shapes, about 0.2 microm thick, interdigitated with those of adjoining cells along the entire length of the cell margins in all the animal species examined. This finding suggests that the fine pedicel interdigitation is a primary event in morphogenesis of the podocyte. The basal aspect of the glomerular epithelium was mosaicked with pedicels which were laid at various angles to the capillary axis, in favor of its possible role as a mechanical support of the capillary wall.