Performance tests of catalysts for the safe conversion of hydrogen inside the nuclear waste containers in Fukushima Daiichi

The safe decommissioning as well as decontamination of the radioactive waste resulting from the nuclear accident in Fukushima Daiichi represents a huge task for the next decade. At present, research and development on long-term safe storage containers has become an urgent task with international cooperation in Japan. One challenge is the generation of hydrogen and oxygen in significant amounts by means of radiolysis inside the containers, as the nuclear waste contains a large portion of sea water. The generation of radiolysis gases may lead to a significant pressure build-up inside the containers and to the formation of flammable gases with the risk of ignition and the loss of integrity.In the framework of the project “R&D on technology for reducing concentration of flammable gases generated in long-term waste storage containers” funded by the Japanese Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), the potential application of catalytic recombiner devices inside the storage containers is investigated. In this context, a suitable catalyst based on the so-called intelligent automotive catalyst for use in a recombiner is under consideration. The catalyst is originally developed and mass-produced for automotive exhaust gas purification, and is characterized by having a self-healing function of precious metals (Pd, Pt and Rh) dissolved as a solid solution in the perovskite type oxides. The basic features of this catalyst have been tested in an experimental program. The test series in the REKO-4 facility has revealed the basic characteristics of the catalyst required for designing the recombiner system.     

Automatic Extraction of Rules for Anaphora Resolution of Japanese Zero Pronouns in Japanese–English Machine Translation from Aligned Sentence Pairs

This paper proposes a method to extract rules for the anaphora resolution of Japanese zero pronouns in Japanese–English MT from aligned sentence pairs. After aligned sentence pairs unsuitable for rule extraction because of analysis errors or free translations are automatically rejected, zero pronouns in the Japanese sentences and the English translation equivalents of their antecedents are extracted from the remaining Japanese and English aligned sentence pairs using ten hand-developed alignment rules. This method identifies all Japanese zero pronouns whose translation equivalents are not explicitly expressed in an English sentence, this method identifies these as unalignable. Then, resolution rules for the remaining zero pronouns are automatically extracted using the aligned pairs, equivalent word/phrase pairs extracted from the aligned sentence pairs, and the syntactic and semantic structures of the Japanese sentences. This method was implemented in a Japanese–English MT system, ALT-J/E. 98.4% of all pairs were automatically aligned correctly in a window test, and 94.0% in a blind test. Furthermore, extracted rules for zero pronouns with deictic references created automatically from sentence pairs correctly resolved 99.0% of the zero pronouns in a window test and 85.0% of the zero pronouns in a blind test.     

Size Measurement of Polystyrene Latex Particles Larger than 1 Micrometer using a Long Differential Mobility Analyzer

We describe a newly constructed annular-type differential mobility analyzer (DMA) with an effective electrode length of 60 cm, which is longer than that of our original DMA (40 cm length). This long DMA was developed to extend the classification size of particles measuring up to 1.5 μm. As an application of this DMA, the mean diameters and standard deviations were determined for six samples of monodisperse polystyrene latex (PSL) particles ranging from 0.94 to 1.27 μm in nominal diameter. These PSL particles suspended in double-distilled water were aerosolized by a glass nebulizer and then introduced into the DMA. The mean diameters and standard deviations of these PSL particles were calculated by Ehara's method and compared with the nominal diameters and uncertainties. There was good correlation between the nominal diameters of these samples—particularly for recently certified samples—and the measured diameters. Classification of aerosol particles more than 1 micrometer in diameter using this DMA will be useful for many purposes.     

Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Selective formation of CH3OH in the photocatalytic reduction of CO2 with H2O on titanium oxides highly dispersed within zeolites and mesoporous molecular sieves

Highly dispersed titanium oxide catalysts have been prepared within zeolite cavities as well as in the zeolite framework and utilized as photocatalysts for the reduction of CO₂ with H₂O to produce CH₄ and CH₃OH at 328 K. In situ photoluminescence, ESR, diffuse reflectance absorption and XAFS investigations indicate that the titanium oxide species are highly dispersed within the zeolite cavities and framework and exist in tetrahedral coordination. The charge transfer excited state of the highly dispersed titanium oxide species play a significant role in the reduction of CO₂ with H₂O with a high selectivity for the formation of CH₃OH, while the catalysts involving the aggregated octahedrally coordinated titanium oxide species show a high selectivity to produce CH₄, being similar to reactions on the powdered TiO₂ catalysts. Ti-mesoporous molecular sieves exhibit high photocatalytic reactivity for the formation of CH₃OH, its reactivity being much higher than the powdered TiO₂ catalysts. The addition of Pt onto the highly dispersed titanium oxide catalysts promotes the charge separation which leads to an increase in the formation of CH₄ in place of CH₃OH formation.     

Sources of nitrate and ammonium contamination in groundwater under developing Asian megacities

The status of nitrate (NO(3)(-)), nitrite (NO(2)(-)) and ammonium (NH(4)(+)) contamination in the water systems, and the mechanisms controlling their sources, pathways, and distributions were investigated for the Southeast Asian cities of Metro Manila, Bangkok, and Jakarta. GIS-based monitoring and dual isotope approach (nitrate delta(15)N and delta(18)O) suggested that human waste via severe sewer leakage was the major source of nutrient contaminants in Metro Manila and Jakarta urban areas. Furthermore, the characteristics of the nutrient contamination differed depending on the agricultural land use pattern in the suburban areas: high nitrate contamination was observed in Jakarta (dry fields), and relatively lower nutrients consisting mainly of ammonium were detected in Bangkok (paddy fields). The exponential increase in NO(3)(-)-delta(15)N along with the NO(3)(-) reduction and clear delta(18)O/delta(15)N slopes of NO(3)(-) ( approximately 0.5) indicated the occurrence of denitrification. An anoxic subsurface system associated with the natural geological setting (e.g., the old tidal plain at Bangkok) and artificial pavement coverage served to buffer NO(3)(-) contamination via active denitrification and reduced nitrification. Our results showed that NO(3)(-) and NH(4)(+) contamination of the aquifers in Metro Manila, Bangkok, and Jakarta was not excessive, suggesting low risk of drinking groundwater to human health, at present. However, the increased nitrogen load and increased per capita gross domestic product (GDP) in these developing cities may increase this contamination in the very near future. Continuous monitoring and management of the groundwater system is needed to minimize groundwater pollution in these areas, and this information should be shared among adjacent countries with similar geographic and cultural settings.     

Effective cleaning of hexagonal boron nitride for graphene devices

Hexagonal boron nitride (h-BN) films have attracted considerable interest as substrates for graphene. ( Dean, C. R. et al. Nat. Nanotechnol. 2010 , 5 , 722 - 6 ; Wang, H. et al. Electron Device Lett. 2011 , 32 , 1209 - 1211 ; Sanchez-Yamagishi, J. et al. Phys. Rev. Lett. 2012 , 108 , 1 - 5 .) We study the presence of organic contaminants introduced by standard lithography and substrate transfer processing on h-BN films exfoliated on silicon oxide substrates. Exposure to photoresist processing adds a large broad luminescence peak to the Raman spectrum of the h-BN flake. This signal persists through typical furnace annealing recipes (Ar/H(2)). A recipe that successfully removes organic contaminants and results in clean h-BN flakes involves treatment in Ar/O(2) at 500 °C.     

Synthesis of Crystalline Black Phosphorus Thin Film on Sapphire

Black phosphorus (BP) has recently attracted significant attention due to its exceptional physical properties. Currently, high‐quality few‐layer and thin‐film BP are produced primarily by mechanical exfoliation, limiting their potential in future applications. Here, the synthesis of highly crystalline thin‐film BP on 5 mm sapphire substrates by conversion from red to black phosphorus at 700 °C and 1.5 GPa is demonstrated. The synthesized ≈50 nm thick BP thin films are polycrystalline with a crystal domain size ranging from 40 to 70 µm long, as indicated by Raman mapping and infrared extinction spectroscopy. At room temperature, field‐effect mobility of the synthesized BP thin film is found to be around 160 cm² V^?1 s^?1 along armchair direction and reaches up to about 200 cm² V^?1 s^?1 at around 90 K. Moreover, red phosphorus (RP) covered by exfoliated hexagonal boron nitride (hBN) before conversion shows atomically sharp hBN/BP interface and perfectly layered BP after the conversion. This demonstration represents a critical step toward the future realization of large scale, high‐quality BP devices and circuits.     

A Quaternary van der Waals Ferromagnetic Semiconductor AgVP2Se6

The recent realization of 2D magnetism in van der Waals (vdWs) magnets holds promise for future information technology. However, the vdWs semiconducting ferromagnets, which remain rare, are especially important in developing 2D magnetic devices with new functionalities due to the possibility of simultaneous control of the carrier charge and spin. Metal thiophosphate (MTP), a multifunctional vdWs material system that combines the sought‐after properties of complex oxides, is a promising vdWs magnet system. Here, single crystals of a novel vdWs ferromagnetic semiconductor MTP AgVP₂Se₆ with a room‐temperature resistivity of 1 Ω m are successfully synthesized. Due to the nature of vdWs bonding along the c‐axis, the magnetic properties of the few‐layer AgVP₂Se₆ with different thicknesses are characterized on the exfoliated samples. The AgVP₂Se₆ flakes exhibit significant thickness‐dependent magnetic properties, and a rectangular hysteresis loop with a large coercive field of 750 Oe at 2 K and an undiminished Curie temperature of 19 K are observed in the 6.7 nm AgVP₂Se₆ flake. The discovered vdWs ferromagnet AgVP₂Se₆ with semiconducting behavior will provide alternative platforms for exploring 2D magnetism and potential applications in spintronic devices.