Diffusion/adsorption model of cellulose dyeing. II. Ordinary cellulose–direct dye system

The diffusion and adsorption of C.I. Direct Yellow 12 and Blue 15 in water-swollen ordinary cellophane sheets were examined at various ionic strengths. The concentration dependence of apparent diffusion coefficients, D_c, for these dyes was obtained from the diffusion profiles in the substrate, which were measured by the use of the cylindrical film roll method. The decrease of apparent porosity with an increase in the amounts of adsorption was observed. To explain the diffusion/adsorption behaviors of these systems, a variable porosity model was proposed and was applied to analyze the concentration dependence of D_c's. The diffusion/adsorption behaviors of these dyes could be quantitatively described by this model at relatively low ionic strengths. At higher ionic strengths and/or lower values of C, i.e., at the large values of C_im/C_m, where the C's are the concentrations of immobilized (suffix im) and mobile (suffix m) species, it needed to introduce the concept of dynamic equilibria which occurred simultaneously with diffusion but deviated from the true equiliblia measured by the adsorption experiments.     

Reaction and diffusion of reactive disperse dye in nylon 6

The diffusion of a reactive disperse dye with a vinylsulfonyl group accompanied by simultaneous reaction with the amino end groups in nylon 6 was examined by the method of cylindrical film roll at 70°C and pH 2.2–8.0. The experimental diffusion profiles of the active and fixed species of the dye in nylon 6 were confirmed to be described by the diffusion equation accompanied by the chemical reaction with substrate taking the limited amount of the end groups into account, where the active species of dye were assumed to react only with the free base of amino end groups. The completion of the reaction with the amino end groups was observed in the first layer from the surface at pH 6.0–8.0. The value of diffusion coefficient was constant (8.0 × 10^?10 cm²/s) at all the pH's. The product of the second-order rate constant, k₂, of reaction of the dye and the dissociation constant, K_a, of the amino end groups was constant (k₂K_a = 4.0 × 10^?9 s^?1) at pH 2.2–8.0. The k₂ values of the reaction with various substrates for vinylsulfonyl and monochlorotriazinyl-reactive dyes were compared and the practical dyeing conditions were discussed.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate) prepared by γ-or UV-ray polymerization were investigated by using thermogravimetric measurements with the intermittent analysis of the gaseous products. The degradation of fluoroalkyl methacrylate polymers, monomeric units of which were CH₂=C(CH₃)COOCH₂(CF₂CF₂)_nH, n = 1, 2, and 3, proceeded according to the depolymerization mechanism reproducing the pristine monomer exclusively, but the thermogram in inert atmosphere showed the features of a two-step reaction. Two species of polymer differing in the heat stability were supposed to exist in the polymeric substance produced by γ- or UV-ray irradiation, and the fraction of polymer having lower heat stability increased with the increasing length of the fluoroalkyl ester group. In air, however, the thermogram of poly(fluoroalkyl methacrylate) showed no such a stepwise weight decrease as was observed in inert atomsphere with the elevating temperature, and the temperatures at which the depolymerization was introduced shifted to a much higher region. The results were ascribed to the reaction of initiating polymer radicals produced on polymer having lower stability with oxygen to form hydroperoxide, which once stabilized the polymer radicals and obstructed the initiaition of the unzipping reaction till higher temperature.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

Radical polymerization of butyl acrylate and random copolymerization of styrene and butyl acrylate and styrene and methyl methacrylate mediated by monospiro- and dispiropiperidinyl-N-oxyl radicals

Radical polymerization of butyl acrylate (BA) and random copolymerizations of styrene (St) and BA and St and methyl methacrylate (MMA) in the presence of 7-aza-15-hydroxydispiro[5.1.5.3]hexadecane-7-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxyspiro[5.6]dodecane-1-yloxyl (2) were carried out. Radical polymerization of BA at 120 °C in the presence of 1 gave poly(BA) with M_n=20200 and M_w/M_n=1.30 at 23% conversion. The termination of polymerization observed around ∼20% conversion was solved to a certain extent by an addition of small amounts of dicumyl peroxide, and poly(BA) with M_n=37400 and M_w/M_n=1.33 was obtained in 46% yield. Random copolymerizations of St and BA and St and MMA in the presence of 1 and 2 at 80 °C gave the corresponding random copolymers with narrow polydispersities of 1.12-1.38 at the molar fraction above 0.30 of St in feed. The kinetic study for the NO-C bond homolysis of the corresponding alkoxyamines prepared from 1 and 2 were carried out, and evaluation of the preexponential factors (A_act) and the activation parameters (E_act) showed that the steric factors of the nitroxides are reflected mainly on E_act.     

Oxidation behavior of TiAl coated with a fine-grain Co-30Cr-4Al film

The oxidation behavior of TiAl coupons coated with a fine-grain Co-30Cr-4Al (mass %) film of about 30-m thickness has been studied at 1100–1400 K in a flow of purified oxygen at atmospheric pressure for up to 500 ks. Three oxidation stages were recognized: initial transient, parabolic, and accelerated stages. However, at 1100 K a parabolic stage continues for more than 800 ks. The activation energy for parabolic oxidation agrees with reported values for the oxidation of alumina-former alloys, although the mass gains during the parabolic stages are relatively small at 1200 and 1300 K. Micropores developed mainly at the scale/coating and coating/substrate interfaces as oxidation proceeded. This is attributable to recrystallization of the coating during oxidation and a Kirkendall effect due to preferential diffusion of Co into the substrate. The accelerated oxidation can be explained in terms of the formation of rutile mounds on the scale.     

Water matrix effect on UV photodegradation of perfluorooctanoic acid

The widespread detection of perfluorinated compounds (PFCs) in the water environment has been a concern for the last several years, while effluents from wastewater treatment facilities are the major sources of these compounds. Even advanced oxidation technologies (AOTs) are not useful for mineralization of the compounds due to their very high stability. Photochemical techniques using particularly vacuum UV (VUV) have been found to be very promising in this regard. But the use of VUV in UV-based AOTs has still not progressed much. Moreover, the impact of water quality on PFCs photomineralization is unknown. This investigation aimed to assess photomineralization potentials of perfluorooctanoic acid (PFOA) in ultrapure water (UPW), tap water (TW), surface water and treated wastewater effluent using a reactor setup enabling maximum utilization of VUV emission of low pressure lamp in laboratory batch experiments. Neya River water (NRW) and the Nakahama Wastewater Treatment Plant Effluent (NWWTPE) represented surface water and treated wastewater effluent respectively. Also, tests were carried out in 50% diluted NRW and NWWTPE. PFOA photomineralization in terms of PFOA removal, defluorination and total organic carbon (TOC) removal are discussed. The usefulness of the method for PFOA mineralization in organic-rich wastewaters, and further research needs are also highlighted.     

Sensorless Position Control Using Feedforward Internal Force for Completely Restrained Parallel-Wire-Driven Systems

Generally, point-to-point control for a completely restrained (CR) parallel-wire-driven system requires a balancing internal force to prevent slackening of wires, along with a feedback term based on some displacement sensor. This paper specifically describes CR systems' internal force properties, then presents the possibility of motion convergence at a desired position when the internal force balancing at a position is given as sensorless feedforward input. Subsequently, we use the property of internal force positively for sensorless position control. This positioning method is applicable for low-cost manipulation, which does not require high accuracy, and for emergency positioning of systems when sensors malfunction.     

High-temperature oxidation of Al-deposited stainless-steel foils

The oxidation resistance of Al-deposited Fe–Cr–Al foils containing small amounts of La and Ce was assessed by a cyclic oxidation test with temperature varying between room temperature and 1323 K to 1423 K in static air. (1) The Al content of Fe–Cr–Al–La, Ce foils can be increased by depositing an Al layer from the vapor phase. The deposition of a 1-m-thick Al layer on both sides of the 50-m-thick foil is equivalent to a 1.5 mass% increase in the Al content. The deposited Al diffuses into the foil during heat treatment. The uniform distribution of Al is obtained by heating at 1273 K for 18 ks. (2) After the initial transition stage the oxidation follows the parabolic law until breakaway sets in. The scale consists mainly of -Al₂O₃ during the parabolic period. (3) The increase in the Al content by more than 5 mass% by the Al-deposition remarkably improves high-temperature oxidation resistance (smaller parabolic rate constant and longer protection time). (4) The Al-deposited foils have better oxidation resistance than the conventional foils with the same contents of Al and rare-earth elements. This is attributable to the different nature of the initially formed oxide on the Al-deposited foil. (5) The so-called rare-earth element effect was also observed for the Al-deposited foils. Predominant diffusion of oxygen through the Al₂O₃ scale and vacancy-sink mechanism are applicable to the present results.