Hydraulic pressure buckling in plastic coated optical fibre

Buckling was observed under hydraulic pressure in a multi-mode plastic-coated optical fibre with a buffer layer. The optical loss increase by buckling was examined. It was found that the occurrence of buckling can be estimated from the relationship between compressibility and Young's modulus of the coating materials.     

Evaluation of cathode materials for the lithium/ carbonmonofluoride battery

The lithium—carbonmonofluoride (CF)_n system is one of the most promising systems for high energy density primary batteries and is described in this paper. In this system, discharge performances mainly depend on cathode materials, (CF)_n, prepared by fluorinating various carbon materials at moderate temperatures. Two kinds of active carbons, graphite and coke, were chosen and tested in cells to determine the best carbon material for the carbonmonofluoride cathode. The (CF)_n cathode made of coke has been shown to have excellent discharge performances, good storage behavior, and an energy density of 140 W h/kg in small button cell sizes.     

Decarboxylation of the 6-nitrobenzisoxazole-3-carboxylate anion catalyzed by cross-linked poly(4-vinylpyridinium) salts

Summary Catalysis of cationic polyelectrolytes for the decarboxylation of 6-nitrobenzisoxazole-3-carboxylate anion was studied in a buffer solution (pH=9.0). Cross-linked poly (4-vinylpyridinium) salts prepared from 4-vinylpyridine and , -dibromides were used as cationic catalysts. The cross-linked catalysts were found to accelerate markedly the decarboxylation in comparison with the linear water-soluble analogues. Effect of the polymer structure such as the length of (CH₂)_x linkages between positive charges on the catalytic activity was examined. It was suggested that the acceleration by the cross-linked polymer catalysts would be due to the hydrophobic microenvironment around the catalytic sites.     

Magnetization ringing in the B phase of superfluid3He

We study theoretically the ringing of magnetization in superfluid³He-B for two configurations: the ringing in the Leggett configuration in the presence of a transverse field and the longitudinal ringing in the parallel plate configuration. It is shown that the time variation of the magnetization is described in terms of three distinct ringing frequencies in these general configurations.     

Molecular Evolution of the TET Gene Family in Mammals

Ten-eleven translocation (TET) proteins, a family of Fe²⁺- and 2-oxoglutarate-dependent dioxygenases, are involved in DNA demethylation. They also help regulate various cellular functions. Three TET paralogs have been identified (TET1, TET2, and TET3) in humans. This study focuses on the evolution of mammalian TET genes. Distinct patterns in TET1 and TET2 vs. TET3 were revealed by codon-based tests of positive selection. Results indicate that TET1 and TET2 genes have experienced positive selection more frequently than TET3 gene, and that the majority of codon sites evolved under strong negative selection. These findings imply that the selective pressure on TET3 may have been relaxed in several lineages during the course of evolution. Our analysis of convergent amino acid substitutions also supports the different evolutionary dynamics among TET gene subfamily members. All of the five amino acid sites that are inferred to have evolved under positive selection in the catalytic domain of TET2 are localized at the protein’s outer surface. The adaptive changes of these positively selected amino acid sites could be associated with dynamic interactions between other TET-interacting proteins, and positive selection thus appears to shift the regulatory scheme of TET enzyme function.     

Impact of precursor solution concentration to form superparamagnetic MgFe2O4 nanospheres by ultrasonic spray pyrolysis technique for magnetic thermotherapy

The superparamagnetic magnesium ferrite (MgFe₂O₄) dense nanospheres are synthesized by ultrasonic spray pyrolysis (USP) method from different concentrations of the initial precursor solution. The effect of precursor solution concentration on the particle’s size, morphology, and superparamagnetic behavior has been investigated. XRD results confirm that studied precursor concentration (0.06, 0.12 and 0.24 M) exhibited single phase cubic structure. The mean crystallites size (called as primary particles) of 0.06, 0.12 and 0.24 M samples are 9.6, 11.5, 11.0 nm, respectively but the entire nanosphere’s diameter (called as secondary particles) increases from 206 to 340 nm with increasing precursor concentration. TEM analysis also reveals that nanospheres consist of densely aggregated crystallites of spherical shape and smooth surface. The value of polydispersity index (PDI) shows narrower size distribution for lower concentration. Magnetic properties indicate the superparamagnetic nature for all samples. Herein, the appropriate induction heat generation rate with better morphology was obtained for 0.06 M concentration. Ion release in the aqueous solution of the composition (about 95% for Mg; 99% for Fe) indicating better stability has been confirmed by ICP-OES test. In this approach, as-synthesized nanospheres are suitable for using as a heating agent in magnetic thermotherapy application.     

Making homogeneous and fine droplet O/W emulsions using nonionic surfactants

In many emulsion systems, creaming occurs during the first stage of emulsion breakdown. To reduce the rate of creaming, emulsions having small and uniform droplets are desirable. In this work, types and HLB of nonionic surfactants, emulsification methods, and combinations of oils and nonionic surfactants were investigated in order to make stable and homogeneous emulsions. Emulsification was attained by dissolving the surfactants in the oil phases. The addition speed and volume of water to the oil phases were important factors affecting the emulsion droplet size. The change of the solute state in the process of emulsification was observed stage by stage, and the mechanism of emulsification was elucidated. Homogeneous emulsions were formed in the HLB region, showing liquid crystalline and gel phases in the emulsifying process. The addition speed of water to the oil phase was very important in forming the liquid crystalline and gel phases. Polyoxyethylene(n)sorbitan monostearate could emulsify three kinds of oils (hydrocarbon, fatty acid ester and triglyceride). Polyoxyethylene(n)alkyl ether could emulsify hydrocarbon and fatty acid ester. Polyoxyethylene(n)-monostearate could emulsify only hydrocarbon. Surfactants with proper HLB which were soluble in the oil phase and in the presence of a very small amount of water formed a stable emulsion. The solubility state of oil and surfactant was the key to making a fine emulsion.     

Frequency stabilization of a semiconductor laser under direct FSK modulation: The modulation method and evaluation of stability

The frequency stability of a semiconductor laser deteriorated under direct frequency shift keying (FSK) when stabilization depended entirely upon an external frequency reference. Therefore, the PEAK method was devised for the purpose of improving frequency stability. This method requires two distinct frequency components and, therefore, will not work effectively in a communications system that produces a succession of identical frequencies, as does the FSK method on occasion. This paper, then, explains the results of our comparative analysis of the two modulation methods. The evaluation of frequency stability requires us to use a beat note between two stabilized laser beams, referred to here, as “signal” and “reference,” lasers. The reference laser is stabilized by a method that takes advantage of the magneto-optical effect. This laser restrains the tendency of the beat note frequency to broaden in other stabilization methods, and even makes it possible to predetermine the beat frequency to be employed. The improvement in frequency stability obtained is about one order of magnitude. © 1998 Scripta Technica, Electr Eng Jpn, 125(2): 44–51, 1998     

Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process

This paper describes the influence of the discharge current and the pulse duration on the titanium carbide (TiC) deposition process by electrical discharge machining (EDM) with titanium (Ti) powder suspended in working oil. Although the influence of the electrical conditions for removal EDM has been investigated, the criteria for deposition have not been discussed. In the experiments, a 1-mm copper rod was used for an electrode to prevent the flushing of working oil from the gap between the electrode and a workpiece. Ti powder reacted with the cracked carbon from the working oil, then depositing a TiC layer on a workpiece surface. A major criterion of the deposition or removal was the discharge energy over a pulse duration of 10 μs. A thickness of the TiC layer became the maximum at a certain discharge current and pulse duration. Larger discharge energy and power promoted the removal by heat and pressure caused by the discharge. The removal was classified further into two patterns; cracks were observed on the Ti-rich surface in removal pattern 1 and a workpiece was simply removed in removal pattern 2. The maximum hardness of the deposition was 2000 Hv. The workpiece about 10 μm beneath its surface was also hardened because of the dispersion of TiC. The machining conditions for the hardest deposition did not coincide with those for the highest one. Therefore, the discharge current and pulse duration should be optimized for the deposition.     

Improvement of Heat Generation Ability in AC Magnetic Field and Magnetic Properties for Spinel Type MgFe2O4 Ferrite by Cu Substitution and Beads Milling

Mg_1-XCu_XFe₂O₄ type spinel ferrite was prepared by solid reaction method in order to discuss the heat generation ability in AC magnetic field.The cubic type ferrite structure was obtained for X=0-0.6 samples calcined at1200℃,and the mixture phase of cubic and tetragonal structures were obtained for X=0.7,0.8 samples from XRD result.The highest lattice parameter and highest hysteresis loss value were also shown at X=0.6 sample,the crystal distortion was increased with increase the Cu²⁺substitution in cubic type ferrite structure.The sized nano Mg_0.4Cu_0.6Fe₂O₄ powder was prepared by physical milling method using beads milling.The highest heat generation in the AC magnetic field was obtained for the 6 h milled samples using 0.1mm beads.The Cu²⁺substitution for MgFe₂O₄ ferrite and the beads milling were very effective for the improvement of their heat generation ability in AC magnetic field.