Thermoelectric Properties of Ruddlesden–Popper Phase n-Type Semiconducting Oxides: La-, Nd-, and Nb-Doped Sr3Ti2O7

We report herein on Ruddlesden–Popper-type doped Sr _{n +1}Ti _n O_{3 n +1} ( n =2) as a potential candidate for n -type thermoelectric (TE) oxides. The TE properties of 5 at.% La-, Nd-, and Nb-doped Sr₃Ti₂O₇ polycrystalline ceramics were investigated and the origin of Seebeck coefficient was discussed from the viewpoint of the symmetry of TiO₆ octahedra. A significant reduction in the lattice thermal conductivity was observed by the enhancement of phonon scattering at SrO/(SrTiO₃) _n interfaces originating from the inherent superlattice structure, and the maximum dimensionless figure of merit, ZT ∼0.15, at a 1000 K value was obtained in 5 at.% La-doped Sr₃Ti₂O₇.     

Phase formation of Mn-doped zinc silicate in water at high-temperatures and high-pressures

Phase formation of Mn-doped zinc silicate (Zn₂SiO₄:Mn²⁺, ZSM) in high-temperature and high-pressure water was studied by in situ observations with a hydrothermal diamond anvil cell (HDAC). Precursor was prepared with zinc oxalate dihydrate, manganese oxalate, and silica, where the Zn/Mn/Si molar ratio was 192/8/120 to 199/1/120. Conditions of particle formation were at temperatures up to 650 °C and at pressures up to 1250 MPa. Precursors dissolved at temperatures of 145–203 °C and needle-like particles formed through homogeneous nucleation at temperatures from 357 to 374 °C, close to the critical point of water. The needle-like particles grew at growth rates of 0.5–3.8 μm/s and were identified to be ZSM as evident from their green luminescence. ZSM synthesized in supercritical water (400 °C for 180 min) by batch reactions had comparable luminescence with that of ZSM produced by solid-state reaction (1200 °C for 240 min) using the same precursor. The key finding in this work is that the precursors can be made to dissolve in near-critical water and that this allows ZSM to form via a homogeneous nucleation process.     

An application of thermal microscopes to the measurement of thermal effusivity of films

The application of thermal microscopes to the measurement of local thermal properties has drawn considerable scientific interest. We report on the application of a thermal microscope to the measurement of thermal effusivity for films comprising alumina deposited on a substrate, which were fabricated by an electrophoretic deposition method. The measured data was analyzed to consider the undulations on the sample surface The thermal effusivity of these samples was approximately 1×10³ Js^?0.5m^?2K^?1; this value is smaller than that for dense alumina because the alumina grain makes contact with a point. © 2008 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20227     

Drying Rate Curves of Porous Solids in Steam and in Air under Low-Pressure Conditions

Drying of porous solids such as sintered glass beads, baked clay, and cemented glass balloons in both steam and air streams was investigated under low-pressure conditions. There was no significant difference between the normalized observed drying rate curves in air at low pressures of 0.71-1.19 kPa and those in steam at low pressures of 0.97-0.99 kPa. However, lower critical moisture contents and higher drying rates in superheated steam at subatmospheric pressures of 8.27-8.33 kPa were observed compared to those in steam at pressures in the range of 0.97-0.99 kPa. Moreover, two models were validated for the prediction of drying rate curves of sintered glass beads at subatmospheric and low pressures. The patterns of the drying rate curves, which depend on the drying medium and its pressure, were common to these materials.     

Thermochemical decomposition of hydrogen sulfide with nickel sulfide

In this research, the two-step thermochemical cycle shown below is proposed and experimental studies were made on the cycle. $$\frac{\begin{gathered} {\text{Ni}}_{\text{3}} {\text{S}}_{\text{2}} + {\text{H}}_{\text{2}} {\text{S}} = {\text{3NiS + H}}_{\text{2}} \hfill \\ {\text{3NiS = Ni}}_{\text{3}} {\text{S}}_{\text{2}} {\text{ + 0}}{\text{.5S}}_{\text{2}} {\text{(g)}} \hfill \\ \end{gathered} }{{{\text{H}}_{\text{2}} {\text{S = H}}_{\text{2}} {\text{ + 0}}{\text{.5S}}_{\text{2}} {\text{(g)}}}}$$ In the case where Ni₃S₂ alone was used without inert additions, nickel sulfide sintered or partly fused due to the melting point depression resulting from the thermal decomposition of formed NiS. Such sintering could be prevented by mixing the nickel sulfide powders with Al₂O₃ or MoS₂. The cyclic reactions were thereby shown to provide a stationary high decomposition rate of H₂S. Polysulfides, such as MS₂, have previously been employed in this kind of cycle. This research showed that the use of lower sulfides such as Ni₃S₂ may be regarded as rather promising based on the thermodynamic investigation of the respective reactions composing the cycle. The comparison between the sulfurization reactions of NiS to NiS₂ and of Ni₃S₂ to NiS further showed that the latter was superior to the former with respect to the kinetics and thermodynamical properties of the reaction.     

Water-filled single-wall carbon nanotubes as molecular nanovalves

It is known that at low temperature, water inside single-wall carbon nanotubes (water-SWNTs) undergoes a structural transition to form tube-like solid structures. The resulting ice NTs are hollow cylinders with diameters comparable to those of typical gas molecules. Hence, the gas-adsorption properties of ice- and water-SWNTs are of interest. Here, we carry out the first systematic investigation into the stability of water-SWNTs in various gas atmospheres below 0.1 MPa by means of electrical resistance, X-ray diffraction, NMR measurements and molecular dynamics calculations. It is found that the resistivity of water-SWNTs exhibits a significant increase in gas atmospheres below a critical temperature Tc, at which a particular type of atmospheric gas molecule enters the SWNTs in an on-off fashion. On the basis of this phenomenon, it is proposed that water-SWNTs can be used to fabricate a new type of molecular nanovalve.     

Toward in vivo imaging of heart disease using a radiolabeled single-chain Fv fragment targeting tenascin-C

Antibodies specific to a particular target molecule can be used as analytical reagents, not only for in vitro immunoassays but also for noninvasive in vivo imaging, e.g., immunoscintigraphies. In the latter case, it is important to reduce the size of antibody molecules in order to achieve suitable in vivo "diagnostic kinetics" and generate higher-resolution images. For these purposes, single-chain Fv fragments (scFvs; M(r) < 30 kDa) have greater potential than intact immunoglobulins (~150 kDa) or Fab (or Fab') fragments (~50 kDa). Our recent observation of enhanced tenascin-C (Tnc) expression at sites of cardiac repair after myocardial infarction prompted us to develop a radiolabeled scFv against Tnc for in vivo imaging of heart disease. We cloned the genes encoding the heavy and light chain variable domains of the mouse anti-Tnc monoclonal antibody 4F10, and combined them to create a single gene. The resulting scFv-4F10 gene was expressed in E. coli cells to produce soluble scFv proteins. scFv-4F10 has an affinity for Tnc (K(a) = 3.5 × 10(7) M(-1)), similar to the Fab fragment of antibody 4F10 (K(a) = 1.3 × 10(7) M(-1)) and high enough to be of practical use. A cysteine residue was then added to the C-terminus to achieve site-specific (111)In labeling via a chelating group. The resulting (111)In-labeled scFv was administered to a rat model of acute myocardial infarction. Biodistribution and quantitative autoradiographic studies indicated higher uptake of the radioactivity at the infarcted myocardium than the noninfarcted one. Single photon emission computed tomography (SPECT) provided in vivo cardiac images that coincided with the ex vivo observations. Our results will promote advances in diagnostic strategies for heart disease.     

Microstructures and Thermoelectric Properties of Sintered Misfit-Layered Cobalt Oxide

Misfit-layered cobalt oxide Ca₃Co₄O₉ is considered to be a prospective material for thermoelectric conversion. The thermoelectric properties are anisotropic owing to its anisotropic crystal structure. The crystal has preferred thermoelectric properties along the a–b plane. Therefore, the thermoelectric properties are improved and controlled by the degree of orientation of the sintered sample. In the present work, Sr-doped misfit cobalt oxide Ca_2.7Sr_0.3Co₄O₉ was prepared by solid-phase reaction, followed by uniaxial compression molding and sintering at 1173 K. The Seebeck coefficient α, electrical resistivity ρ, and dimensionless figure of merit ZT were measured as a function of the compression pressure applied in the uniaxial molding. α, ρ, and ZT as functions of the degree of orientation and the relative density are experimentally clarified and explained by calculations using the compound model.     

Handwritten digit recognition: investigation of normalization and feature extraction techniques

The performance evaluation of various techniques is important to select the correct options in developing character recognition systems. In our previous works, we have proposed aspect ratio adaptive normalization (ARAN) and have evaluated the performance of state-of-the-art feature extraction and classification techniques. For this time, we will propose some improved normalization functions and direction feature extraction strategies and will compare their performance with existing techniques. We compare ten normalization functions (seven based on dimensions and three based on moments) and eight feature vectors on three distinct data sources. The normalization functions and feature vectors are combined to produce eighty classification accuracies to each dataset. The comparison of normalization functions shows that moment-based functions outperform the dimension-based ones and the aspect ratio mapping is influential. The comparison of feature vectors shows that the improved feature extraction strategies outperform their baseline counterparts. The gradient feature from gray-scale image mostly yields the best performance and the improved NCFE (normalization-cooperated feature extraction) features also perform well. The combined effects of normalization, feature extraction, and classification have yielded very high accuracies on well-known datasets.     

Noninvasive online measurement of particle size and concentration in liquid–particle mixture by estimating equivalent circuit of electrical double layer

ABSTRACT

Three electrical elements (i.e., resistance, capacitance, and relaxation frequency) of electrical double layer (EDL) formed around particles have been extracted by a measuring–fitting combination for a novel noninvasive online measurement technique of particle size and concentration in a liquid–particle mixture. The measuring–fitting combination means measuring the impedances with electrical-impedance spectroscopy (EIS) method, and fitting the equivalent circuit with Levenberg–Marquardt method. The liquid–particle mixture in the impedance measurement is made of sodium chloride solution and stainless particles; the equivalent circuit is established corresponding to the contents in the liquid–particle mixture. As a result, the influence of the particle size and concentration on the electrical elements in the EDL which are the resistance, capacitance, and relaxation frequency in the EDL are clarified and discussed. This method is useful for determination of the particle size and concentration in liquid–particle mixture.