X-ray microdiffraction investigation of crystallinity and strain relaxation in Ge thin lines selectively grown on Si(0 0 1) substrates

We used X-ray microdiffraction (XRMD) to investigate the crystallinity and strain relaxation of Ge thin lines with widths of 100, 200, 500 and 1000 nm selectively grown on Si(0 0 1) substrates using a patterned SiO₂ mask by chemical vapor deposition. The variations of the strain relaxation in the line and width directions were also investigated in Ge thin lines with a width of 100 nm. After growth, crystal domains with very small tilt angles were detected in Ge lines with all four line widths. The tilt angle range was larger in thinner Ge lines. After annealing at 700 °C, the formation of a single, large domain with a specific tilt angle was detected by XRMD for Ge thin lines with widths of 100 and 200 nm. These experimental results reflect the effects of SiO₂ side walls around the Ge thin lines on crystallinity and strain relaxation of Ge.     

Direct electron transfer in a mediator-free glucose oxidase-based carbon nanotube-coated biosensor

A novel biosensor was prepared by immobilizing glucose oxidase on multi-walled carbon nanotube (MWCNT)-coated electrospun gold fibers. Homogeneous coating of the electrospun gold fibers by MWCNTs was achieved by electrophoretic deposition at 20 V (40 V cm^?1), a deposition time of 30 s and a solution concentration of 0.25 mg mL^?1. Scanning electron microscopy confirmed the complete coverage of MWCNTs on the fiber surface. The carboxylated MWCNTs on the gold fibers provided an anchor for covalent immobilization of glucose oxidase (GOX). GOX covalently coupled to conductive carbon nanotubes demonstrated direct electron transfer between the enzyme and the electrode surface without the need for a redox active mediator. Electrochemical characterization of the fabricated sensor by cyclic voltammetry revealed that the immobilized GOX exhibited a surface-confined reversible two-electron and two-proton reaction, with an electron transfer rate constant, k_s, of 1.12 s^?1 and a surface coverage of 1.1 × 10^?12 mol cm^?2. The sensor produced a linear response to glucose concentration up to 30.0 mM with a sensitivity of 0.47 μA mM^?1 cm^?2 and a detection limit of 4 μM.     

Clonazepam oral droplets for the treatment of acute epileptic seizures

Oral droplet formulations of clonazepam (CZ) were developed to examine their potentials as an alternative to i.v. administration for the treatment of acute epileptic seizures. Propylene glycol containing 2.5% (wt/wt) CZ with or without 5.0% (wt/wt) oleic acid (OA) was prepared as a solution by heating at 90 degrees C and subsequently lowering the temperature to 30 degrees C. The droplet (20 microL) was administered to the oral cavity between the lower gum and bottom lip before CZ precipitation started. With a droplet of propylene glycol loaded with 2.5% (wt/wt) CZ and 5.0% (wt/wt) OA, the plasma concentration reached 20 ng/mL (minimal effective concentration) within 10 min and was maintained between 20 and 60 ng/mL, less than a toxic level, for a period of 60 min. For a droplet of propylene glycol loaded only with CZ at 2.5% (wt/wt), it took more than 15 min for the plasma concentration to reach 20 ng/mL. It is suggested that a droplet of CZ/OA/propylene glycol (2.5:5.0:92.5, wt/wt) might be useful as an alternative to i.v. injection of CZ for the treatment of acute epileptic seizures.     

Dust Explosion Characteristics of Aluminum, Titanium, Zinc, and Iron-Based Alloy Powders Used in Cold Spray Processing

Compared to conventional thermal spray coating, cold spray processing typically employs finer, smaller-diameter metal powders. Furthermore, cold-sprayed particles exhibit fewer surface oxides than thermally sprayed particles due to the absence of particle melting during spraying. For these reasons, it is important to consider the potential for dust explosions or fires during cold spray processing, for both industrial and R&D applications. This work examined the dust explosion characteristics of metal powders typically used in cold spray coating, for the purpose of preventing dust explosions and fires and thus protecting the health and safety of workers and guarding against property damage. In order to safely make use of the new cold spray technology in industrial settings, it is necessary to manage the risks based on an appropriate assessment of the hazards. However, there have been few research reports focused on such risk management. Therefore, in this study, the dust explosion characteristics of aluminum, titanium, zinc, carbonyl iron, and eutectoid steel containing chromium at 4 wt.% (4 wt.% Cr-eutectoid steel) powders were evaluated according to the standard protocols JIS Z 8818, IEC61241-2-3(1994-09) section 3, and JIS Z 8817. This paper reports our results concerning the dust explosion properties of the above-mentioned metal powders.     

Inter-laboratory evaluation studies for establishment of notified ELISA methods for allergic substances (peanuts)

Inter-laboratory evaluation studies were conducted for ELISA methods for allergic substances (peanuts). Extracts of biscuit, sauce, chocolate and butter spiked with peanut standard protein at a level of 5-20 ng/mL as sample solutions were analyzed in replicate in 10 laboratories. Coefficients of variation (CVs) of the ELISA methods using a Peanut Protein ELISA Kit (Peanut kit) and a FASTKIT Peanut ELISA kit (Peanut ELISA kit) were mostly below 10%. Mean recoveries of the peanut standard protein from the food extracts were over 40% in the two ELISA methods. Repeatability relative standard deviations of peanut standard protein in four food extracts were in the ranges of 15.2-49.7% and 3.0-28.3% for the Peanut kit and the Peanut ELISA kit, respectively. Reproducibility relative standard deviations of peanut standard protein in four food extracts were 23.5-44.4%, 9.6-28.4% for the Peanut kit and the Peanut ELISA kit, respectively. The detection limits of both ELISA methods were 2-2.5 ng/mL in sample solutions. These results suggested that the notified ELISA methods are reliable and reproducible for the inspection of peanut protein levels in extracts of biscuit, sauce, chocolate and butter.     

Analytical method of cereulide in processed cereal-based foods and milk powder by LC-MS/MS

An LC-MS/MS method for analysis of cereulide, an emetic toxin produced by Bacillus cereus, was developed. Cereulide was extracted from samples, fried rice, pan-fried noodles, red bean paste and baby formula, with methanol and purified using Oasis HLB cartridges. LC separation was performed on a C18 column with a mixture of formic acid solution and methanol containing ammonium formate as a mobile phase, and the mass spectrometer was operated in the positive electrospray ionization mode. Performance evaluation showed that trueness was higher than 70% and repeatability and reproducibility were within 10%. The limits of quantification were lower than 1 μg/kg.     

Pesticide adsorption by granular activated carbon adsorbers. 2. Effects of pesticide and natural organic matter characteristics on pesticide breakthrough curves

The principal objective of this study was to elucidate mechanisms by which NOM affects the adsorption of a nonpolar (simazine) and a polar (asulam) herbicide on activated carbon. Experiments were carried out in microcolumns that were continuously fed solutions containing NOM with different molecular weight (MW) distributions and intermittently solutions containing the same NOM plus simazine or asulam. The MW distributions of a groundwater NOM were altered by coagulation and ultrafiltration, which resulted in the preferential removal of high-MW, UV260-absorbing NOM. At a given NOM loading, the simazine removal efficiency was higher in the column that was preloaded with raw groundwater than in columns receiving coagulated or ultrafiltered water. In contrast, the asulam removal efficiency was similar for all three NOM solutions at a given NOM loading. Therefore, the results suggested that low-MW, UV260-absorbing NOM molecules competed directly with strongly adsorbing pesticides, such as simazine, for adsorption sites. For more weakly adsorbing pesticides, such as asulam, direct competition for adsorption sites originated not only from the strongly adsorbing, low-MW NOM, but also from more weakly adsorbing, higher-MW NOM. Consequently, the competing NOM fraction increases as the adsorbability of the SOC decreases, a result that was confirmed by adsorption data for additional pesticides of similar size. However, a smaller pesticide competed more effectively for adsorption sites than a larger pesticide of similar polarity, suggesting that the concentration of competing NOM decreases as the MW of the SOC decreases.     

Targeted proteome analysis of microalgae under high-light conditions by optimized protein extraction of photosynthetic organisms

1. Download high-res image (294KB)
2. Download full-size image

     

A detection method of CryIAc protein for identifying genetically modified rice using the lateral flow strip assay

We examined the lateral flow strip assay for identifying unauthorized genetically modified (GM) rice. The GM rice expresses the Bacillus thuringiensis (Bt) toxin, CryIAc protein, which confers tolerance to insects. The recombinant CryIAc protein was prepared from the inclusion bodies of an E. coli. strain into which the CryIAc gene had been inserted, using gel filtration chromatography. The lateral flow strip assay for the identification of GM cotton which also expresses CryIAc protein, was applied to unpolished rice and polished rice spiked with recombinant CryIAc protein. The spiked recombinant CryIAc protein was clearly detected at the level of 0.012 microg/g in both the unpolished and polished rice. After loading of the extract on the strip, a 60 -minute stand time is necessary to clearly detect CryIAc protein. The detection limit was approximately 12 ng CryIAc protein per gram of rice. These results suggest that the lateral flow strip assay for GM cotton can be used to detect CryIAc protein expressed in GM rice.