New surface forces apparatus using two-beam interferometry

We designed a new surface forces apparatus for measuring the interactions between two nontransparent substrates and/or in nontransparent liquids. The small displacement of a surface, the bottom one in this study, was measured by the two-beam (twin path) interferometry technique using the phase difference between the laser light reflected by the fixed mirror and that by the mirror on the back of the bottom surface unit. It is possible to determine the distance with a resolution of 1 nm in the working range of 5 microm. This apparatus was successfully applied to measure the forces between mica surfaces in pure water and aqueous KBr solutions.     

Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics

Optimization of groove dimensions in herringbone-grooved journal bearings is discussed in this paper with aims to design precision spindles with improved run-out characteristics. An evaluation index to represent the magnitude of the amplitude of repeatable run-out is firstly introduced and the groove design parameters are theoretically discussed to minimize the index value with taking the stable operation condition of the bearing into account. The comprehensive parameter research reveals a guideline for the design of the groove configuration for good run-out characteristics. Experiments with a shaft with grooves designed along the proposed guideline show that the amplitude of repeatable run-out reduces to about half of that of a bearing with currently designed groove configurations, thus confirming validity of the above guideline.     

High-sensitivity detection of proteins using gel electrophoresis and atomic force microscopy

We have developed a method to detect specific proteins with a high sensitivity using a gel electrophoresis method and force measurement of atomic force microscopy (AFM). Biotinylated proteins were separated by electrophoresis and fixed with cross-linking chemicals on the gel, followed by direct force measurement between the biotinylated proteins on the gel and a streptavidin-modified tip of an AFM cantilever. We were able to achieve a high enough sensitivity to detect the picogram order of the biotinylated proteins by evaluating the frequency of the interaction force larger than 100 pN in the force profile, which corresponds to the rupture force of interaction between streptavidin and biotin.     

Gas and vapor permeability of perfluoroalkylated polymers

Summary Three polymers bearing benzene rings: polystyrene, poly(2,6-dimethyl-p-phenylene oxide) and poly(diphenylacetylene), were chemically modified with bis(heptafluorobutyryl) peroxide. The heptafluoropropylated products have higher gas permeabilities than the parent polymers. In the pervaporation of aqueous ethanol, modified poly(diphenylacetylene) showed ethanol permselectivity.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Correlation between friction of articular cartilage and reflectance intensity from superficial images

The lubrication mechanism of articular cartilage is characterized by an efficient performance. In this work, friction of articular cartilage was evaluated with in-site images of articular surface. The images were captured with the laser light reflected at the interface between a prism and articular cartilage. The attenuation of reflectance was associated with the increase of the contact of collagen network of articular cartilage. The light reflectance and friction coefficient for short sliding presented a significant positive correlation. Friction tests were also carried out for short (30 s) and long (300 s) preloading times. The results indicate that depletion of fluid film is responsible for the increase of friction and the recovery of the fluid film was observed for the long preloading after the early stage of sliding.     

Technique for anisotropic extension of organic crystals: application to temperature dependence of electrical resistance

We have developed a technique for the anisotropic extension of fragile molecular crystals. The pressure medium and the instrument, which extends the pressure medium, are both made from epoxy resin. Since the thermal contraction of our instrument is identical to that of the pressure medium, the strain applied to the pressure medium has no temperature dependence down to 2 K. Therefore, the degree of extension applied to the single crystal at low temperatures is uniquely determined from the degree of extension in the pressure medium and thermal contractions of the epoxy resin and the single crystal at ambient pressure. Using this novel instrument, we have measured the temperature dependence of the electrical resistance of metallic, superconducting, and insulating materials. The experimental results are discussed from the viewpoint of the extension (compression) of the lattice constants along the parallel (perpendicular) direction.     

Construction of a versatile ultralow temperature scanning tunneling microscope

We constructed a dilution-refrigerator (DR)-based ultralow temperature scanning tunneling microscope (ULT-STM) which works at temperatures down to 30 mK, in magnetic fields up to 6 T and in ultrahigh vacuum (UHV). Besides these extreme operation conditions, this STM has several unique features not available in other DR-based ULT-STMs. One can load STM tips as well as samples with clean surfaces prepared in an UHV environment to a STM head keeping low temperature and UHV conditions. After then, the system can be cooled back to near the base temperature within 3 h. Due to these capabilities, it has a variety of applications not only for cleavable materials but also for almost all conducting materials. The present ULT-STM has also an exceptionally high stability in the presence of magnetic field and even during field sweep. We describe details of its design, performance, and applications for low temperature physics.     

Magnetic probe array with high sensitivity for fluctuating field

A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.