Generation of uniform drops via through-hole arrays micromachined in stainless-steel plates

This study investigated the generation of oil drops using new symmetric and asymmetric through-hole-array devices made of stainless steel. The through-hole-array devices were built by piling up six stainless-steel plates, each having circular micro-holes with a diameter of 300 or 500 μm or micro-slots with a shorter line of 300 or 500 μm. Drops were generated by injecting a dispersed phase (refined soybean oil) via the through-hole array into a compartment filled with a continuous phase (Milli-Q water solution containing one of two emulsifiers). The drop detachment from symmetric and asymmetric through holes was observed in real time and analyzed. Uniform oil drops with average diameters of 1.0–4.1 mm and coefficients of variation of typically less than 6% were generated using symmetric and asymmetric through-hole-array devices. The resultant drop diameters for asymmetric through-hole arrays were significantly smaller than those for symmetric through-hole arrays. This paper also discusses experimental results regarding the effects of the microstructure, the dimensions of the through holes, and the type of emulsifier on drop generation and the resultant drop diameter.     

Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.     

Theoretical and evolutionary parameter tuning of neural oscillators with a double-chain structure for generating rhythmic signals

A neural oscillator with a double-chain structure is one of the central pattern generator models used to simulate and understand rhythmic movements in living organisms. However, it is difficult to reproduce desired rhythmic signals by tuning an enormous number of parameters of neural oscillators. In this study, we propose an automatic tuning method consisting of two parts. The first involves tuning rules for both the time constants and the amplitude of the oscillatory outputs based on theoretical analyses of the relationship between parameters and outputs of the neural oscillators. The second involves an evolutionary tuning method with a two-step genetic algorithm (GA), consisting of a global GA and a local GA, for tuning parameters such as neural connection weights that have no exact tuning rule. Using numerical experiments, we confirmed that the proposed tuning method could successfully tune all parameters and generate sinusoidal waves. The tuning performance of the proposed method was less affected by factors such as the number of excitatory oscillators or the desired outputs. Furthermore, the proposed method was applied to the parameter-tuning problem of some types of artificial and biological wave reproduction and yielded optimal parameter values that generated complex rhythmic signals in Caenorhabditis elegans without trial and error.     

High-temperature and broadband immersion ultrasonic probes

Immersion ultrasonic probes for measurements and imaging at high temperature are presented. The probes consist of sol-gel-sprayed thick films as piezoelectric ultrasonic transducers (UTs) directly deposited onto steel buffer rods. They operate in pulse-echo mode at temperatures up to 500/spl deg/C. The operating ultrasonic frequency is between 5 MHz and 20 MHz, controlled by the film thickness. The ultrasonic thickness measurement of a steel plate with the probe fully immersed in molten zinc at 450/spl deg/C was demonstrated using ultrasonic plane waves. For imaging purposes, the probing end of the steel buffer rod was machined into a semispherical concave shape to form an ultrasonic lens and achieve high spatial resolution with focused ultrasound in liquids. Ultrasonic surface and subsurface imaging using a mechanical raster scan of the focused probe in silicone oil at 200/spl deg/C was also carried out. The importance of the signal-to-noise ratio (SNR) in the pulse-echo measurement is discussed.     

Secondary electron emission and surface charging evaluation of alumina ceramics and sapphire

The breakdown of alumina rf windows is mostly caused by multipactor, as well as by material defects and contamination. Since multipator induces localized surface heating, leading to surface melting, it is necessary to observe secondary electron emission (SEE) coefficients of alumina ceramics under high temperature conditions. The SEE coefficients of commercial alumina ceramics and sapphire were measured by a scanning electron microscopy (SEM) with a single short-pulsed electron beam (100 pA, 1 ms) at room temperature and at 650degC. Additive materials used for sintering alumina, such as SiO ₂ and MgO, were also investigated. Surface charging evaluations have also become important because the accumulated charges are discharged at the threshold Held, resulting in surface discharge. The surface charging evaluations were carried out by multi-pulse measurements with the injection of successive pulses on the sample. As a result, reductions in the SEE coefficients with temperature were confirmed, except for sapphire. The multi-pulse measurement results indicated that surface charging of the sapphire was higher than that of other samples. This may be one of the factors that causes sapphire not to be durable for rf window applications, compared with alumina ceramics. Although there are few exceptions, it was found that the SEE coefficients of alumina ceramics increased with the purity and the average grain size     

Further study on different dopings into PbWO4 single crystals to increase the scintillation light yield

Since we presented our preliminary result (Nucl. Instr. and Meth. A 486 (2002) 170) at SCINT2001, we have continued our efforts to increase the light yield (LY) of PbWO₄ scintillators by extending different dopings with an aim to find a possibility of using PbWO₄ successfully in Positron Emission Tomography (PET). Overall result obtained for single doping as well as double and tripple co-dopings are summarized, including decay characteristics and radiation hardness. The LY in non-doped PbWO₄ crystals with a size of 10×10×(20–30) mm³ is 25–35 photolectrons/MeV (phe/MeV) corresponding to 3–4% of the LY in BGO, when measured with a bialkali photomultiplier during a gate of 1 μs. The maximum LY increased to 49 phe/MeV for single doping with Mo⁶⁺, 80 phe/MeV for double co-doping of Mo⁶⁺+Sb⁵⁺, and 85 phe/MeV for tripple co-doping of Mo⁶⁺+Cd²⁺+Sb⁵⁺. The radiation hardness is larger than 10⁵ Gy for each of the samples co-doped with Mo⁶⁺+Sb⁵⁺ and Mo⁶⁺+Cd²⁺+Sb⁵⁺, while it is much poorer in PWO:Mo⁶⁺. In each of these co-doped samples, a medium-speed green emission in the microsecond range is created besides the fundamental fast (a few nanoseconds range) blue one, giving a peak at 500 nm in the radioluminescence spectrum similarly as in PWO:Mo⁶⁺.     

Importance of multiple-phonon interactions in molecular dissociation and nanofabrication using optical near fields

A quasi-particle (exciton-phonon polariton) model, as a simple model of an optical near-field probe, is proposed to investigate an unresolved problem in photochemical processes, i.e., why a vapor molecule can be dissociated by an incident photon with less energy than the dissociation energy only if, not a propagating far field, but an optical near field is used, and what is the mechanism leading to the photon flux dependence of the deposition rates. Incident photon energy and intensity dependences of Zn deposition rates are analyzed, and good agreement between the theoretical and experimental results is obtained. It suggests that the probe system plays an important role in vibrational transitions as well as electronic transitions in photodissociation processes, and that the couplings between the optical near field and molecular vibrations are enhanced to permit a nonresonant photodissociation inherent in the optical near field.     

Sensor Fusion System Using Recurrent Fuzzy Inference

In robotic and manufacturing systems, it is difficult to measure the state of systems accurately because of many uncertain factors and noise, and it is very important to estimate the state of systems. We must measure the phenomena of systems by multiple sensors and estimate the state of systems by acquiring information of sensors. However, we can not acquire all of sensor information synchronically, because each sensor has particular sensor information and measuring time. For estimating the state of systems by multiple sensors, a multi-sensor fusion system fusing various sensory information is needed. In this paper, we propose a Recurrent Fuzzy Inference (RFI) with recurrent inputs and apply it to a multi-sensor fusion system for estimating the state of systems. The membership functions of RFI are expressed by Radial Basis Function (RBF) with insensitive ranges. The shape of the membership functions can be adjusted by a learning algorithm. The learning algorithm is based on the steepest descent method and incremental learning which can add new fuzzy rules. The effectiveness of the multi-sensor fusion system using RFI will be shown through a numerical experiment of moving robot and estimation of surface roughness in grinding process.     

A simple adaptive PI controller for linear systems with constantdisturbances

It is known that an adaptive controller via high-gain output feedback can globally stabilize a class of minimum phase systems with relative degree one. However, exact output regulation is difficult for systems with disturbances. In this paper, we consider linear single-input/single-output (SISO) systems with unknown constant disturbances. We present a simple adaptive output feedback controller with an integral action and show that it can asymptotically stabilize those disturbed systems. The proposed PI type adaptive controller can also deal with the output tracking problem of a step reference