Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Total emission control for managing regional water quality: a game theoretic decision process

A simple game theoretic model with hierarchical structure is developed for regulating the total amount of pollutant discharged by all the effluent producers in a given region, where the allowable limit on total emission, that is the environmental carrying capacity, is assumed to be given. It is proposed that the total emission is to be allocated amongst all the polluters so as to maximize the social benefit, and that the social benefit is to be allocated through taxation on the companies under the criterion of impartiality. The concept of impartiality is defined as equal individual satisfaction for the polluters who cooperate. This concept is applied to solve the characteristic function game. A numerical example is included.     

Poly(p‐phenylene sulfide) nanofibers prepared by CO2 laser supersonic drawing

Poly(p‐phenylene sulfide) (PPS) nanofibers are prepared by irradiating a PPS fiber with a carbon dioxide (CO₂) laser while drawing it at supersonic speeds. A supersonic jet is generated by blowing air into a vacuum chamber through the fiber injection orifice. Nanofibers obtained at a laser power of 30 W and chamber pressure of 10 kPa exhibit an average diameter of 600 nm and a draw ratio of 110,000. Scanning electron microscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction analyses are employed to investigate the relationships among the chamber pressure, fiber morphology, and crystallization behavior. The nanofibers exhibit two melting temperatures (T_m): approximately 280°C and 320°C. The endothermic peak at T_m = 280°C is ascribable to lamellar crystals and that at T_m = 320°C to the highly complete crystals, since the polymer molecular chain is highly oriented. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40922.     

The terminal protein of the linear DNA plasmid pGKL2 shares an N-terminal domain of the plasmid-encoded DNA polymerase

The 36K protein attached at the 5′ end of the linear DNA plasmid pGKL2 from the yeast Kluyveromyces lactis was first purified and characterized. The terminal protein was purified from cells (1 kg wet weight) by ammonium sulphate precipitation and two rounds of centrifugation to equilibrium in CsCl gradients. The pGKL2 was present only in the post-microsomal supernatant. Approximately 10 mg of the purified pGKL2 was recovered and digested with DNase I. The terminal protein (final ca. 0·8 mg) was homogeneous by electrophoresis and we determined the N-terminal amino acid sequence up to ten residues, showing that it existed in the cryptic N-terminal domain of pGKL2-ORF2 (DNA polymerase) sequence.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Generalized warpage parameter

A warpage index (Δψ_m) was introduced for studying warpage characteristics of a plastic part injection molded from PA66 compounded with 30 wt% glass fiber. Δψ_m is defined as Δψ_m = (Δψ_m)_max – (Δψ_m)_min, where ψ_m = ψ(θ)_max, where ψ(θ) = (ε(θ) – α(θ)ΔT)/| α(θ)ΔT|, where ε is the total strain, α is the linear thermal expansion coefficient, ΔT is temperature difference, and θ is the angle along which ε and α are calculated. Finite element analysis was used for calculating flow field in injection, fiber orientation, material anisotropy and warpage. ψ_m is calculated in each finite element, and Δψ_m is calculated in a whole finite element model. Δψ_m is a measure of the ratio of actual shrinkage to the amount of shrinkage that would occur if an element freely shrank. The characteristics of Δψ_m were studied. It has been found that warpage is null if Δψ_m = 0, but that null warpage generally does not indicate Δψ_m = 0. It is shown that Δψ_m quantitatively represents the warped and unwarped state. Δψ_m distinguishes the null warpage state with possible buckling from the null warpage state without possible buckling. It has been shown that material anisotropy is possibly described with Δψ_m, and that the cause of warpage is self-restrictive deformation in an injection molded part. It has been deduced that it is generally not possible to eliminate warpage only by controlling material properties. Δψ_m is obtainable for a plastic part with complex geometry and complex fiber orientation state, and for arbitrary materials. Applications of Δψ_m are left for future study.     

Therapeutic Targets and Emerging Treatments in Advanced Chondrosarcoma

Simple SummaryChondrosarcomas develop chemoresistance to standard anticancer drugs, making it difficult to control unresectable or metastatic chondrosarcomas. To improve the clinical outcomes of chondrosarcoma, new treatment approaches, such as molecule-targeting agents and immunotherapy, are needed. Recent research has revealed promising biomarkers and therapeutic targets for chondrosarcoma. In addition, several molecule-targeting agents have shown favorable antitumor activities in several clinical studies in patients with advanced sarcomas, including chondrosarcoma. This review summarizes recent basic studies on biomarkers and therapeutic targets and recent clinical studies on treating chondrosarcomas.AbstractDue to resistance to standard anticancer agents, it is difficult to control the disease progression in patients with metastatic or unresectable chondrosarcoma. Novel therapeutic approaches, such as molecule-targeting drugs and immunotherapy, are required to improve clinical outcomes in patients with advanced chondrosarcoma. Recent studies have suggested several promising biomarkers and therapeutic targets for chondrosarcoma, including IDH1/2 and COL2A1. Several molecule-targeting agents and immunotherapies have shown favorable antitumor activity in clinical studies in patients with advanced chondrosarcomas. This review summarizes recent basic studies on biomarkers and molecular targets and recent clinical studies on the treatment of chondrosarcomas.     

Effects of solid lubricants in backward extrusion

In the present paper, some solid lubricants were tested in backward extrusion friction tests with flat-headed punches using aluminium at room temperature. The results showed that anti-seizure ability was improved when wax was added to the solid lubricant samples. In addition, a water-based graphite lubricant and an ultrahigh molecular weight polyethylene (UHMW-PE) lubricant were tested using aluminium workpieces heated to 500°C. The lubricity of the UHMW-PE lubricant was found to be superior to that of the graphite lubricant.     

Fracture and acoustic emission characteristics of glass fiber reinforced plastics panels for hot water

This study deals with the fracture process and acoustic emission (AE) characteristics of a randomly oriented E-glass fiber mat reinforcement with a crosslinked polyester. These panels were evaluated after they were immersed in hot water. The fiber volume content of the panel was 19%. Glass fiber reinforced plastics (GFRP) panels wer immersed in water at 81°C. Bending and AE monitoring tests were Performed and after bending, the cross-section of the specimen was observed by an optical microscope and SEM. The influence of degradation, due to water immersion, on the changes of fracture process of GFRP is discussed. The dominant fracture mode of the virgin specimen was matrix cracks, whereas that of the immersed specimen was debondings at the fiber bundle/matrix and fiber/matrix interfaces. This change was caused by reduction of the bonding strength at the interface. The scale of fracture can be estimated by both AE amplitude and AE energy and this estimation method was used to estimate the fracture mode changes of GFRP panels immersed in hot water.