A Modified Pressure-Correction Scheme for the SIMPLER Method,MSIMPLER

A new method is proposed to accelerate the convergence rate for the SIMPLER algorithm by artificially changing the underrelaxation term to match the dependent variable to be solved. Based on this idea, a new pressure-correction equation is derived, and the modified algorithm is named MSIMPLER. Five numerical experiments show that the MSIMPLER algorithm can appreciably enhance the convergence rate for cases of low and moderate underrelaxation factors with good robustness.     

Application of magneto-optical sensors for fault location in an air-insulated substation bus

A new fault location system using optical current transducers (CTs) to detect faulted sections in the bus bars of directly grounded 275-kV substations has been developed. This system detects fault current by combining optical CTs with wound-type CTs. The new type of optical CT applies a bulk-type Faraday sensor to the combination of windings around a magnetic iron core and a solenoid coil. The optical CT was capable of current measuring over 50 kA. A current differential discriminator combining an optical CT and a wound-type CT verified the operational performance with 40-kA currents. The intended level of fault detection performance was obtained. Based on these results, a system is being made for actual application in 275-kV substations. © 1997 Scripta Technica, Inc. Electr Eng Jpn 119(2): 10–17, 1997     

Analysis of spatial smoothing effect of short‐term fluctuation of global solar radiation based on data including quantization error

Photovoltaic (PV) systems are attracting attention as one of the promising countermeasures against global warming and the environmental issues. However, the generation output from PV systems is generally unstable and unpredictable. Therefore, large penetration of PV systems may cause some serious impacts on power system operation, such as load frequency control, voltage regulation, etc. Estimation of the influences of PV system installation is becoming important, but it requires simultaneous multipoint solar radiation measurements. The Japan Meteorological Business Support Center has provided 1‐minute meteorological data observed in Japan, but its solar radiation data includes quantization errors. This paper proposes a regeneration method for solar radiation data including quantization errors. It also analyzes the spatial smoothing effect of global solar radiation fluctuations. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(3): 55–63, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21274     

Accurate and efficient RTL power estimation based on power contour model

This paper proposes a new RTL power estimation method based on a power contour model. The model achieves accurate and efficient power estimation. The experimental results show that the maximum error is reduced by 56.19% and the RMS error is also reduced by 3.41% compared to the conventional table‐based RTL power estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(3): 48–56, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22340     

A Basic Study of User Utility Maximizing Content Retrieval from Information Networks

This paper proposes some basic methods of content search yielding high user utility or user's satisfaction from numerous information sources scattered over large‐scale networks. In these methods, the search policy is decided by the estimated user utility gain and/or current user utility for each search action, and the most favorable combination of information sources and search content items is selected so as to enlarge the total user utility of the entire search activity. In addition, we evaluate the efficiency of the methods by computer simulations, in which we specify the network topology, user utility functions, probabilities of existence of the search content items in each information source, and so on, apply the proposed methods and other methods for comparison, and compare their aggregate utility gains as an estimation index. The proposed methods are found to achieve good performance in general and an index value about 2.45 times that of ordinary search is observed in an extreme simulation scenario. We discuss the pros and cons of the proposed methods for all the simulation scenarios.     

Ion conductive characteristics of boron stabilized carbanion derived from organoboron π-conjugated systems

Summary Ion conductive properties of boron stabilized carbanions (BSC) have been studied as a model of π-conjugated ion conductive polymer in which counter anion of lithium ion is delocalized in π-conjugated system. After treatment of the BSC precursor (trimesitylborane or dimesityl-9-anthrylborane) with an organolithium reagent, the color of the reaction mixture dramatically turned to dark red or purple. Interestingly, BSC derived from dimesityl-9-anthrylborane showed moderate ion conductivities of 4.02×10⁻⁷ S/cm at 50°C even in bulk, indicating high dissociation degree of the BSC lithium salt. This can be attributed to the decreace in site hopping energy of the lithium ion, since anionic charge is delocalized via vacant p-orbital of the boron atom. These observations might have important implication for potential capability of ion conductive π-conjugated systems. Received: 20 January 2003/Revised version: 10 April 2003/ Accepted: 19 April 2003 Correspondence to Hiroyuki Ohno     

Difficulty of singularity in population coding

Fisher information has been used to analyze the accuracy of neural population coding. This works well when the Fisher information does not degenerate, but when two stimuli are presented to a population of neurons, a singular structure emerges by their mutual interactions. In this case, the Fisher information matrix degenerates, and the regularity condition ensuring the Cramér-Rao paradigm of statistics is violated. An animal shows pathological behavior in such a situation. We present a novel method of statistical analysis to understand information in population coding in which algebraic singularity plays a major role. The method elucidates the nature of the pathological case by calculating the Fisher information. We then suggest that synchronous firing can resolve singularity and show a method of analyzing the binding problem in terms of the Fisher information. Our method integrates a variety of disciplines in population coding, such as nonregular statistics, Bayesian statistics, singularity in algebraic geometry, and synchronous firing, under the theme of Fisher information.     

A Hilbert warping method for handwriting gesture recognition

We propose a novel sequence alignment algorithm for recognizing handwriting gestures by a camera. In the proposed method, an input image sequence is aligned to the reference sequences by phase-synchronization of analytic signals which are transformed from original feature values. A cumulative distance is calculated simultaneously with the alignment process, and then used for the classification. A major benefit of this method is that over-fitting to sequences of incorrect categories is restricted. The proposed method exhibited higher recognition accuracy in handwriting gesture recognition, compared with the conventional dynamic time warping method which explores optimal alignment results for all categories.     

Minimal design for human–agent communication

Robots have been envisaged as both workers and partners of humans from the earliest period in their history. Therefore, robots should become artificial entities that can socially interact with human beings in social communities. Recent advances in technology have added various functions to robots. The development of actuators and grippers show us infinite possibilities for factory automation, and robots can now walk and perform very smoothly. All of these functions have been developed as solutions for improving robot movement and performance. However, there are many remaining problems in the communication between robots and humans. Communication robots provide one approach to the realization of embodied interfaces. Furthermore, the unsolved problems of human–robot communication can be clarified by adopting the concept of subtractive methods. In this article, we consider the minimal design of robots from the viewpoint of designing communication. By minimal design, we mean eliminating the nonessential portions and keeping only the most fundamental functions. We expect that the simple and clean nature of minimally designed objects will allow humans to interact with these robots without becoming uninterested too quickly. By exploiting the fact that humans have “a natural dislike for the absence of reasoning,” artificial entities built according to minimal design principles can extract the human drive to relate with others. We propose a method of designing a robot that has “character” and is situated in a social context from the viewpoint of minimal design. This work was presented in part at the 10th International Symposium on Artificial Life and Robotics, Oita, Japan, February 4–6, 2005     

Practical BRDF reconstruction using reliable geometric regions from multi-view stereo

Computational Visual Media - In this paper, we present a practical method for reconstructing the bidirectional reflectance distribution function (BRDF) from multiple images of a real object...