High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

Ideal crosslinked-polymers and their characterization in free-radical monovinyl-divinyl copolymerizations

The critical conditions in which the classical Flory-Stockmayer gelation theory (F-S theory) is applicable to monovinyl-divinyl copolymerizations were pursued in detail. The resulting prepolymers or precursors of ideal crosslinked-polymers were characterized as standard polymers for the discussion of network formation in free-radical monovinyl-divinyl copolymerizations. Methyl methacrylate was copolymerized with a small amount of ethylene dimethacrylate, butylene dimethacrylate or nonapropyleneglycol dimethacrylate in the presence of lauryl mercaptan, a chain transfer agent to reduce the occurrence of a thermodynamic excluded volume effect and intramolecular crosslinking as the primary and secondary factors, respectively, for the greatly delayed gelation in the free-radical monovinyl-divinyl copolymerizations and, moreover, to keep the primary chain length constant by inhibiting a gel effect. The ratio of the actual gel point to the theoretical one reached 1.1, supporting the validity of F-S theory. The resulting prepolymers were subjected to SEC-MALLS analysis to determine the molecular weights, the molecular-weight distributions and the radii of gyration; the correlations of molecular weight vs. elution volume and radius of gyration vs. molecular weight were useful for the characterization of the precursors of ideal network-polymers.     

Effect of oxygen on the wettability of sapphire by liquid palladium

The surface tension of liquid palladium and the contact angle between liquid palladium and sapphire have been measured at 1833 K as a function of oxygen pressure by the sessile drop method. Oxygen acted as a surface-active element on the surface of liquid palladium and at the interface between liquid palladium and sapphire, resulting in the decrease of the surface tension and the contact angle. The work of adhesion calculated from their values increased with increasing oxygen pressure, and had a constant value above 400 Pa. The maximum excess concentration of oxygen was estimated to be 7.3×10^–6 mol m^–2 for the surface and 6.9×10^–6 mol m^–2 for the interface.     

An image processing system using Image Signal Multiprocessors (ISMPs)

This paper describes an image processing system using Image Signal Multiprocessors (ISMPs) adapted to gray-level image preprocessing for image analysis and image enhancement. It is composed of four ISMPs, five 1H-delay-lines, two 512×512×8-bit frame memories, a video timing controller (VTC), two 256-word ×8-bit ×8-table Look Up Tables (LUTs) and 80 nsec/sampling A/D and D/A converters. This multiprocessor system performs convolution operations such as spatial filters, contrast enhancement, and binarization for gray-level images, thinning, thickening, pattern matching etc. for binary images, and image quality improvement for moving images such as T.V. images. Otherwise, it performs feature extraction operations such as area calculations, fillet coordination, and moment calculations for objective image data. Moreover, this system is capable of applying color image processing by using a multiboard system.     

Direct contact melting of porous material

The direct contact melting of a porous material is investigated experimentally and analytically. The phase change material (PCM) is made of fine ice particles of a nearly uniform diameter, which is changed as a parameter. In the analysis, two models are proposed. One is calculated as the direct contact melting of a monolithic sample and another is treated as an assembly of the direct contact melting of the individual particles. As a result, it was found that the heat flux increased with the diameter, due to increase of permeability in a case of small diameter. But, in a case of large diameter, the heat flux decreased as the particle diameter increased because the direct contact melting occurred independently for the individual particles.     

Simulation study of eutrophication in Hiroshima Bay: Simulation of particulate and dissolved organic matter using cyclic transformation of carbon

A phytoplankton model, which includes a carbon cycle combined with a constant current obtained by the computation of tidal currents, was applied to the coastal region (Hiroshima Bay, Japan). The transformation rate constants for the carbon cycle were experimentally evaluated.The seasonal variations of particulate and dissolved organic matter by the simulation model were reasonably consistent with the field data. Carbon concentration increased by primary production in the upper layer was approx. 10 times that augmented by loading of carbon from land at the shore in summer. Sinking plays an important role in the elimination of particulate organic matter. On the other hand, horizontal advection and turbulent diffusion are important factors for the diminution of dissolved organic matter.     

Wheel/rail contact dynamics in turnout negotiations with combined nodal and non-conformal contact approach

In railroad turnouts, geometries of tongue and crossing rails are very complex and their shapes are changing along the track. Therefore, wheels are subjected to not only tread and flange contacts, but also the back-of-flange and top-of-flange contacts in the case of spring switches of tram vehicles. For this reason, one needs to deal with significant jumps in contact points for solving wheel/rail contact problems in turnout, and an accurate prediction of jumps in contact points is one of the most important issues that need to be carefully handled in the dynamic simulation of vehicle/turnout interactions. In this investigation, a numerical procedure that can be used for solving such a complex wheel/rail contact problem in turnout is proposed. In particular, a combined nodal and non-conformal contact approach is developed such that significant jumps in contact points are detected using the nodal search, while the exact location of contact point is then determined with continuous surface parameterizations using non-conformal contact equations. With this combined nodal and non-conformal contact approach for the contact geometry analysis of vehicle/turnout interactions, multiple look-up contact tables can be generated in an efficient way without losing accuracy. Since detailed contact search is performed off-line to obtain look-up contact tables, significant changes in contact points in turnout can be efficiently predicted on-line with tabular data to be interpolated in a standard way. Several numerical examples are presented in order to demonstrate the use of the numerical procedure developed in this investigation.     

Preparation and characterization of porous and electrically conducting carbon-clay composites

Porous and electrically conducting carbon-clay composites were prepared by firing mixtures of carbon powder (0 to 20 wt%) and clay minerals. They showed porosity of 50 to 65% and had high mechanical strength (compressive strength = 130 to 400 kg cm^–2) as well as high resistance against thermal oxidation in air. Their electrical conductivity, , increased with increasing carbon content levelling off at about 20 wt% of carbon content to give a value of about 2 S cm^–1. Formation of carbon chains is considered to be responsible for the electrical conduction in the composite, and a model to correlate the electrical conductivity with the carbon content has been proposed by modifying a model previously proposed by Scarisbrick.     

Crystallization of potassium titanate from the amorphous phase

By using amorphous potassium titanates as the starting materials, a sintered body of K₂Ti₄O₉ or K₂Ti₆O₁₃ with porous and fibrous textures was prepared. K₂Ti₂O₅ and a new phase, K₆Ti₄O₁₁ were synthesized by the thermal reaction of KNO₃ with TiO₂ at 1000° C for 10 to 20 h. On leaching in water to expel excess of potassium ions, both phases became amorphous. After mixing and moulding these amorphous materials in the desired proportion, a sintered body containing fibrous crystals of K₂Ti₄O₉ was readily fabricated by heating at 1000° C for 12 h. When 5 wt % B₂O₃ was added to the amorphous phases, single phase K₂Ti₆O₁₃, with a fibrous texture grew well on heating at 1000° C for 12 h. Addition of PVA polymer to the amorphous phases was responsible for controlling the porosity of the sintered body, e.g. about 52% theoretical density at 20 wt% PVA polymer. The optimum conditions for preparing the amorphous phases were systematically examined and the effect of the chemical reaction environments, such as different crucible materials on the calcination of KNO₃ and TiO₂ were also discussed.     

铝合金局部加压凝固及流动数值模拟的研究

局部加压方法是压铸中用于消除铸件厚壁处缩孔缺陷的一种新工艺.本研究通过实验模型测量了不同加压条件下铸件的冷却曲线,分析了局部加压引起的凝固变化.考虑局部加压引起的补缩流动,通过适时修改网格文件、初始和边界条件的方法,模拟了局部加压过程中铝合金的凝固及流动变化,并与实验结果进行了对比,二者基本吻合.