Deposition of carbon and its hydrogenation catalyzed by nickel

Formation of carbon on nickel sheet from benzene vapor carried by hydrogen was studied at a temperature range from 520 to 730°C. A maximum rate was observed at about 630°C, above which the deposition rate decreased rapidly. The carbon formed was hydrogenated in situ. Methane was the main gaseous product and a maximum rate was observed at about 670°C. Very high reactivity of deposited carbon toward hydrogenation was ascribed to the catalytic action of nickel particles dispersed in the carbon. The hydrogenation rates were divided into three zones and possible interpretations are discussed. A mechanism which is a reverse process to deposition was suggested. The decrease of the hydrogenation rate at higher temperatures was due to the equilibrium among carbon, hydrogen and methane, where carbon was more reactive than graphite.     

Novel method of preparing Ag–Hg alloy on polyacrylamide films and their structure

A novel method is proposed of preparing thin Ag–Hg alloy on PAAm film surface at room temperature: The film of interest is formed by holding PAAm aqueous solution with AgNO₃ in Hg-saturated atmosphere. Two kinds of films, one of which is a conductor and the other an insulator, can be selectively formed with pH-controlled PAAm solution by ammonia. The conducting surface is assigned to the α phase of Ag–Hg alloy by means of X-ray analysis. Potentiometric titration and IR spectral studies suggest the existence of PAAm–Ag⁺ complexes. On the basis of their structure and the oxidation and reduction potential of Ag⁺ and Hg²⁺, the mechanism of film formation is also discussed.     

Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.     

Preserving worker privacy in crowdsourcing

This paper proposes a crowdsourcing quality control method with worker-privacy preservation. Crowdsourcing allows us to outsource tasks to a number of workers. The results of tasks obtained in crowdsourcing are often low-quality due to the difference in the degree of skill. Therefore, we need quality control methods to estimate reliable results from low-quality results. In this paper, we point out privacy problems of workers in crowdsourcing. Personal information of workers can be inferred from the results provided by each worker. To formulate and to address the privacy problems, we define a worker-private quality control problem, a variation of the quality control problem that preserves privacy of workers. We propose a worker-private latent class protocol where a requester can estimate the true results with worker privacy preserved. The key ideas are decentralization of computation and introduction of secure computation. We theoretically guarantee the security of the proposed protocol and experimentally examine the computational efficiency and accuracy.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

A novel method for three-dimensional observation of the vascular networks in the whole mouse brain

A novel method for acquiring serial images suitable for three-dimensional reconstruction of vascular networks in the whole brain of mouse was developed. The brain infused with a White India ink-gelatin solution was fixed and embedded in paraffin containing Sudan Black B through xylene also containing Sudan Black B. Each sliced surface of the paraffin block was coated with liquid paraffin and its image was serially acquired. Coating with liquid paraffin extremely improved the quality of the image. The series of serial images was free of distortion and a three-dimensional image was reconstructed without the problem of the alignment and registration of adjacent images. The volume-rendered image indicated three-dimensional distribution of blood vessels in a whole brain. No ghost or shadow was observed on a volume-rendered image of the White India ink-gelatin infused brain. The z-axial resolution examined on the orthogonal sections reconstituted from serial images obtained at an interval of 5 mum showed no cross talk, indicating that the z-axial resolution was no larger than 5 mum. A proper understanding of the vascular system in a whole brain is indispensable to reveal the development of the vascular system in the brain of normal and genetically manipulated mouse and vascular alterations in pathological situation, such as stroke and neurodegenerative disease. Although simple and inexpensive, this method will provide fundamental information on the vascular system in a whole brain.     

Production of IL-6 by T cells from the femoral head of patients with rapidly destructive coxopathy (RDC)

We developed a method to improve the quantitative precision of FDG-PET scans in cancer patients. The total-lesion evaluation method generates a correlation coefficient (r) constrained Patlak parametric image of the lesion together with three calculated glucose metabolic indices: (a) the total-lesion metabolic index ("KT-tle", ml/min/lesion); (b) the total-lesion voxel index ("VT-tle", voxels/lesion); and (c) the global average metabolic index ("KV-tle", ml/min/voxel). METHODS: The glucose metabolic indices obtained from conventional region of interest (ROI) and multiplane evaluation were used as standards to evaluate the accuracy of the total-lesion evaluation method. Computer simulations and four patients with metastatic melanoma before and after chemotherapy were studied. RESULTS: Computer simulations showed that the total-lesion evaluation method has improved precision (% s.d. < 0.6%) and accuracy (approximately 10% error) compared with the conventional ROI method (% s.d. approximately 5%; approximately 25% error). The KT-tle and VT-tle indices from human FDG-PET studies using the total-lesion evaluation method showed excellent correlations with the corresponding values obtained from the conventional ROI methods and multiplane evaluation (r approximately 1.0) and CT lesion volume measurements. CONCLUSION: This method is a simple but reliable way to quantitatively monitor tumor FDG uptake. The method has several advantages over the conventional ROI method: (a) less sensitive to the ROI definition, (b) no need for image registration of serial scan data and (c) includes tumor volume changes in the global tumor metabolism.     

New dissimilarity measure for recognizing noisy subsequence trees

Tree is a data structure used to express various objects such as semistructured data and genes. When objects are represented as trees, computing tree similarity is essential for pattern recognition and retrieval. This paper considers the noisy subsequence tree recognition problem whose purpose is to recognize the original tree, given its noisy subsequence tree. Previous research on this problem relied on constrained tree edit distance to measure the dissimilarity. However, the number of relabelings must be predetermined to compute it. This paper proposes a new dissimilarity measure for this problem. Our dissimilarity measure is obtained by counting the node edit operations included in the unit‐cost tree edit distance that contribute to the matching of node labels. The number of relabelings need not be specified to compute our dissimilarity measure. Moreover, our measure achieves more accurate recognition performance and faster execution speed than the constrained tree edit distance. Our measure is also useful to solve the tree inclusion problem which is the problem of deciding whether a tree includes another tree and shows the extent of approximate tree inclusion when a tree incompletely includes another tree. © 2011 Wiley Periodicals, Inc.     

A performance evaluation of disassembly systems with reverse blocking

For sustainable manufacturing, manufacturers should construct and design inverse manufacturing systems consisting of assembly and disassembly systems. The sorting process in the disassembly system is the first process of the whole inverse manufacturing system. Therefore, it can become a bottleneck and decrease the productivity of the whole inverse manufacturing systems.This study focuses on a disassembly system with reverse blocking in a sorting process [Yamada, T., & Matsui, M. (2003). Disassembly production systems and its design issues. Reprints of Japan Industrial Management Association, Spring meeting, Chofu, Japan, May, 144–145 (in Japanese)]. It generalizes the queuing model and discusses the performance of the disassembly system by mathematical and numerical analysis. First, the sorting process with reverse blocking is generally modeled as a queuing system. Next, the stationary state equations of the system are formulated, and the objective function is set as the throughput. Finally, the system performance is discussed by mathematical and numerical analysis in cases of a different number of stations and buffers, and also an example of the system design is shown and discussed in view of the busy rate, blocking probability and throughput.     

Three-dimensional scanner of a pipe with tilt detection

The 3D quantitative measurement system for a sewer pipe is introduced. Two parallel lasers are rotated by the motor and draw the two annular streaks on the inside surface of the pipe. The circular laser streaks are recorded by the CCD camera. The measurement of the cross-section is established by analyzing the recorded streaks. The tilt of the robot against the axis of the pipe is detected by the deviation between two parallel lasers. It enables us to measure the vertical cross section of the pipe regardless the tilt of the system to the pipe. Experimental result shows the feasibility of the system. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008