Control of Snow Falling Flow around NACA0015 Blade using a Plasma Electrode with Weather Resistant Design

The plasma actuation (PA) effect on the snow falling flow was investigated using a plasma electrode with weather resistant design and the natural snow wind facility of the Hokkaido University of Science. NACA0015 test blade with chord length c of 300 mm was used. Wind tunnel tests were carried out under the angle of the attack of the blade was fixed at 15 degrees, and the main flow velocity is U=5 m/s. PIV (Particle image velocimetry) measurements were conducted on various PA conditions using natural dry snowflakes as a tracer. When the actuator was driven under the condition of the fundamental frequency of F=50 kHz, and the pulsed modulated frequency f of fc/U=1 and Duty ratio (Ratio of plasma ON time to pulse duration time) =1%, movement of snowflakes was controlled the most effectively tested. It was clarified that the fundamental frequency of PA also affects the control of snow flow. Under snowfall conditions, the weather resistant designed plasma electrode has suffered no damage and operated successfully.     

Purification and characterization of an extracellular alpha-neoagarooligosaccharide hydrolase from Bacillus sp. MK03

An agarolytic bacterium was isolated from soil in Gifu prefecture, Japan, and identified as Bacillus sp. strain MK03. The strain secreted neoagarooligosaccharide hydroluse into the culture medium. The enzyme was purified 49.7-fold from the culture fluid by ammonium sulfate precipitation and anion-exchange and gel-filtration column chromatographic methods. The purified enzyme appeared as a single band on polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate (SDS)-PAGE. Estimations of the molecular mass by gel filtration and SDS-PAGE gave values of 320 kDa and 42 kDa, respectively, indicating that the enzyme is octametric. The enzyme cleaved the alpha-1,3 linkage in neoagarobiose to produce 3,6-anhydro-L-galactose and D-galactose. It also selectively cleaved the alpha-1,3 linkage at the nonreducing end in neoagarotetraose or neoagarohexaose to give 3,6-anhydro-L-galactose and agarotriose or agaropentaose. The optimum temperature and pH for the enzyme were 30 degrees C and 6.1, respectively. The N-terminal amino acid sequence showed no homology to sequences of other known neoagarooligosaccharide hydrolases and agarases.     

Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

Sub-millimeter-long carbon nanotubes repeatedly grown on and separated from ceramic beads in a single fluidized bed reactor

A semi-continuous fluidized-bed process is reported which rapidly converts acetylene into carbon nanotubes (CNTs). Catalysts are first immobilized on ceramic beads and CNTs are then grown on the beads and then separated from them in a repetitive process accomplished within a single reactor simply by switching gases at a fixed temperature. CNTs of 6–10 nm diameter, three walls on average, 0.4 mm length and 99 wt.% purity were synthesized at an yield of over 70% in a reactor residence time shorter than 0.3 s. The easy and efficient production of such CNTs with in situ separation from the catalysts may accelerate the development of CNT-based nanotechnology industries.     

Triple‐junction effect and its electric field relaxation in three dielectrics

This paper analyzes the electric field distribution near a wedge‐like edge in arrangements consisting of three dielectrics using analytical and numerical methods. The electric potential behaves exponentially as rⁿ (r is the distance from the edge) near the edge, leading to an infinitely high field with decreasing r for all cases. The value of the analytically derived exponent n agreed well with that obtained from the numerical field calculations. It has also been demonstrated that rounded contact of the spacer with a zero contact angle can make the electric field constant without showing an exponential rise near the edge. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 1– 8, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20670     

Thermotropic and Barotropic Phase Behavior of Phosphatidylcholine Bilayers

Bilayers formed by phospholipids are frequently used as model biological membranes in various life science studies. A characteristic feature of phospholipid bilayers is to undergo a structural change called a phase transition in response to environmental changes of their surroundings. In this review, we focus our attention on phase transitions of some major phospholipids contained in biological membranes, phosphatidylcholines (PCs), depending on temperature and pressure. Bilayers of dipalmitoylphosphatidylcholine (DPPC), which is the most representative lipid in model membrane studies, will first be explained. Then, the bilayer phase behavior of various kinds of PCs with different molecular structures is revealed from the temperature–pressure phase diagrams, and the difference in phase stability among these PC bilayers is discussed in connection with the molecular structure of the PC molecules. Furthermore, the solvent effect on the phase behavior is also described briefly.     

The use of intraoperative ultrasonography for detecting tumor extension in bile duct carcinoma

This study examined the intraoral changes of the elastic properties and roughness of a tissue conditioner after treatment with a fluorinated copolymer coating agent developed by the authors. The surface of the conditioner was treated with the agent on half of the internal surface of five maxillary complete dentures and was compared with the untreated half on the other side. The cushioning effects of the conditioners were evaluated by measuring the creep compliance strain-to-stress ratio. The value of compliance on the treated half was significantly greater than that on the untreated half. There was significantly less roughness on the treated side than on the untreated side. It was found that the coating provides an improved, glossy surface to the conditioner and may increase its useful life.     

Contemporary percutaneous treatment of unprotected left main coronary stenoses: initial results from a multicenter registry analysis 1994-1996

BACKGROUND: Coronary artery bypass surgery (CABG) has been considered the therapy of choice for patients with unprotected left main (ULMT) coronary stenoses. Selected single-center reports suggest that the results of percutaneous intervention may now approach those of CABG. METHODS AND RESULTS: To assess the results of percutaneous ULMT treatment from a wide variety of experienced interventional centers, we requested data on consecutive patients treated after January 1, 1994, from 25 centers. One hundred seven patients were identified who were treated either electively (n=91) or for acute myocardial infarction (n=16). Of patients treated electively, 25% were considered inoperable, and 27% were considered high risk for bypass surgery. Primary treatment included stents (50%), directional atherectomy (24%), and balloon angioplasty (20%). Follow-up was 98.8% complete at 15+/-8 months. Results varied considerably, depending on presentation and treatment. For patients with acute myocardial infarction, technical success was achieved in 75%, and survival to hospital discharge was 31%. For elective patients, technical success was achieved in 98.9%, and in-hospital survival was strongly correlated with left ventricular ejection fraction (P=.003). Longer-term event (death, infarction, or bypass surgery) -free survival was correlated with ejection fraction (P<.001) and was inversely related to presentation with progressive or rest angina (P<.001). Surgical candidates with ejection fractions > or = 40% had an in-hospital survival of 98% and a 9-month event-free survival of 86+/-5%, whereas patients with ejection fractions < 40% had 67% and 22+/-12% in-hospital and 9-month event-free survivals, respectively. Nine hospital survivors (10.6%) experienced cardiac death within 6 months of hospital discharge. CONCLUSIONS: While results for selected patients appear promising, until early post-hospital discharge cardiac death can be better understood and minimized, percutaneous revascularization of ULMT stenosis should not be considered an alternative to bypass surgery for most patients. When percutaneous revascularization of ULMT is required, directional atherectomy and stenting appear to be the preferred techniques, and follow-up angiography 6 to 8 weeks after treatment is probably advisable.