The use of intraoperative ultrasonography for detecting tumor extension in bile duct carcinoma

This study examined the intraoral changes of the elastic properties and roughness of a tissue conditioner after treatment with a fluorinated copolymer coating agent developed by the authors. The surface of the conditioner was treated with the agent on half of the internal surface of five maxillary complete dentures and was compared with the untreated half on the other side. The cushioning effects of the conditioners were evaluated by measuring the creep compliance strain-to-stress ratio. The value of compliance on the treated half was significantly greater than that on the untreated half. There was significantly less roughness on the treated side than on the untreated side. It was found that the coating provides an improved, glossy surface to the conditioner and may increase its useful life.     

Contemporary percutaneous treatment of unprotected left main coronary stenoses: initial results from a multicenter registry analysis 1994-1996

BACKGROUND: Coronary artery bypass surgery (CABG) has been considered the therapy of choice for patients with unprotected left main (ULMT) coronary stenoses. Selected single-center reports suggest that the results of percutaneous intervention may now approach those of CABG. METHODS AND RESULTS: To assess the results of percutaneous ULMT treatment from a wide variety of experienced interventional centers, we requested data on consecutive patients treated after January 1, 1994, from 25 centers. One hundred seven patients were identified who were treated either electively (n=91) or for acute myocardial infarction (n=16). Of patients treated electively, 25% were considered inoperable, and 27% were considered high risk for bypass surgery. Primary treatment included stents (50%), directional atherectomy (24%), and balloon angioplasty (20%). Follow-up was 98.8% complete at 15+/-8 months. Results varied considerably, depending on presentation and treatment. For patients with acute myocardial infarction, technical success was achieved in 75%, and survival to hospital discharge was 31%. For elective patients, technical success was achieved in 98.9%, and in-hospital survival was strongly correlated with left ventricular ejection fraction (P=.003). Longer-term event (death, infarction, or bypass surgery) -free survival was correlated with ejection fraction (P<.001) and was inversely related to presentation with progressive or rest angina (P<.001). Surgical candidates with ejection fractions > or = 40% had an in-hospital survival of 98% and a 9-month event-free survival of 86+/-5%, whereas patients with ejection fractions < 40% had 67% and 22+/-12% in-hospital and 9-month event-free survivals, respectively. Nine hospital survivors (10.6%) experienced cardiac death within 6 months of hospital discharge. CONCLUSIONS: While results for selected patients appear promising, until early post-hospital discharge cardiac death can be better understood and minimized, percutaneous revascularization of ULMT stenosis should not be considered an alternative to bypass surgery for most patients. When percutaneous revascularization of ULMT is required, directional atherectomy and stenting appear to be the preferred techniques, and follow-up angiography 6 to 8 weeks after treatment is probably advisable.     

Radiographic analysis of hallux valgus in women on weightbearing and nonweightbearing

To investigate changes in the radiographic appearance during weightbearing in hallux valgus and to examine the importance of a weightbearing view, a comparative study was performed of accurate dorsoplantar radiographs of 108 symptomatic hallux valgus feet in 73 female patients and 100 normal feet in 69 females, which were taken weightbearing and nonweightbearing. The hallux valgus angle in the hallux valgus group increased on weightbearing, whereas that in the normal group decreased. The intermetatarsal angle between the first and second metatarsals increased on weightbearing in both groups. The degree of the changes of the angles was closely related with the degree of the hallux valgus deformity. The intermetatarsal angle between the fourth and fifth metatarsals decreased on weightbearing in the both groups. A weightbearing view is necessary to evaluate the structural configuration of hallux valgus, because muscle imbalance around the first metatarsophalangeal joint in hallux valgus causes an increase of a hallux valgus angle on weightbearing.     

Characterization of plasma membrane proton-ATPase from salt-tolerant yeast Zygosaccharomyces rouxii cells

Plasma membrane was isolated from the salt-tolerant yeast Zygosaccharomyces rouxii and from Saccharomyces cerevisiae. The ATPase in the plasma membrane of Z. rouxii cells was a typical proton-ATPase as judged by testing with various ATPase inhibitors. There were slight differences in the pH optima of activities and in the sensitivity to sodium chloride (NaCl) and potassium chloride (KCl) of the ATPase from Z. rouxii and S. cerevisiae. The specific ATPase activity from Z. rouxii was higher in cells grown in a medium containing 2 _M-NaCl than in those not containing NaCl. No in vivo activation by incubation with glucose was observed in Z. rouxii cells and the specific ATPase activity was independent of the growth phase, unlike S. cerevisiae cells.     

Pervaporation separation of water/ethanol mixtures through polysaccharide membranes. II. The permselectivity of chitosan membrane

The separation of water/alcohol mixtures through chitosan membrane was investigated. The degree of the deacetylation of chitosan did not affect the selectivity of the membrane in the separation of the water/ethanol mixture. The selectivity of the chitosan membrane was affected by the specific salts such as CoSO₄, ZnSO₄, and MnSO₄ and it increased when the salts were present in the feed mixture or the membrane was pretreated with the salt solution. This behavior would be explained by the contraction of the “holes” produced by the thermal motion of polymer chains and this contraction would be correlated with the conformation change of chitosan molecule due to the formation of complexes with metal ions.     

Low-Thermal-Expansion Properties of Sodium- and Lithium-Substituted Cubic Cesium Leucite Compounds

Cubic cesium leucite-based compounds, namely cesium leucites, cesium sodium leucites, and cesium lithium leucites, were synthesized using a multistep solid-state reaction method. The thermal expansion properties, in the temperature range of 298-1273 K, for the synthesized cubic cesium leucite-based compounds were examined using high-temperature powder X-ray diffractometry data. The thermal expansions of the cubic cesium leucite-based compounds were found to vary with the chemical composition. For instance, the thermal expansions of Cs_0.7Na_0.2Al_0.9Si_2.1O₆ and Cs_0.7Li_0.2Al_0.9Si_2.1O₆ were 0.14% at 1273 K and 0.081% at 1073 K, values lower than those of Cs_0.9Al_0.9Si_2.1O₆, which were 0.16% at 1073 K and 0.2% at 1273 K. The results showed that the thermal expansions of the cubic cesium leucite-based compounds changed with ionic substitution at the Cs⁺ sites because of ionic size differences between Cs⁺ and the Na⁺ or Li⁺ substitutional ions.     

Preparation of fine polymer particles containing metallocene derivatives

This article deals with preparations of fine particles of metallocene copolymers by emulsifierfree emulsion polymerization of vinylferrocene (VFc), ferrocenylmethyl methacrylate (FMMA), 1-ferrocenylethyl methacrylate (1-FEMA), 2-ferrocenylethyl methacrylate (2-FEMA), and 1-ruthenocenylethyl methacrylate (1-REMA) with acrylonitrile (AN), styrene (St), and methyl methacrylate (MMA) in water/ethanol medium. As a result, spherical copolymer particles containing metallocene derivatives have been successfully synthesized in the particle size of ca. 120 to 600 nm. The contents of ferrocenyl or ruthenocenyl groups in copolymer particles increased with increasing concentration of charged metallocene derivatives, while the amounts of metallocene derivatives incorporated into particles are much lower than the charged ratio. © 1994 John Wiley & Sons, Inc.     

Enhanced antiviral activity of soybean β-conglycinin-derived peptides by acylation with saturated fatty acids

Abstract: Peptide mixtures prepared from soybean β‐conglycinin (7S‐peptides) were acylated with saturated fatty acids of different chain length (6C‐18C) in order to improve their antiviral activity against Feline calicivirus (FCV) strain F9 which is a typical norovirus surrogate. Among the fatty acids varieties, it was revealed that 7S‐peptides acylated with myristic and palmitic acids potently inhibited FCV replication. Myristorylation and palmitoylation of 7S‐peptides kept host cells viability at 91.51% and 98.90%, respectively. The infectivity of FCV on Crandell–Reese feline kidney cells was further determined after exposure of initial titer of 10^6.47 TCID₅₀/mL. Myristoylated and palmitoylated 7S‐peptides significantly (P < 0.006) reduced FCV infectivity as compared to native 7S‐peptides. Native 7S‐peptides showed 25% FCV inhibitory activity while myristoylated and palmitoylated 7S‐peptides exhibited 98.59% and 99.98% reduction in FCV infectivity, respectively. Myristoylated and palmitoylated 7S‐peptides demonstrated higher anti‐FCV activity in a wide range of concentration with complete reduction at 25 μg/mL. Surface hydrophobicity was significantly (P < 0.05) increased after attachment of long hydrocarbon fatty acids to 7S‐peptides as supported by changes in fluorescence intensity. Enzymatic hydrolysis together with acylation will give an insight into surface and physiological functional lipopeptides derived from soy β‐conglycinin.     

Bubble behavior in vertical tube banks installed in a fluidized bed

Fluidized bed combustion is one of the advantageous technologies for coal and/or incineration firing especially with respect to the environmental protection of emissions, such as NO_x/SO_x. Bed material movement in such a fluidized bed has a prime importance in the heat transfer process. Thus, quantitative measurement of the bed material movement and the void fraction are indispensable for better understanding of the fluidized bed. In this investigation, neutron radiography is applied to visualize the bed material movement in a simulated fluidized bed heat exchanger installed with vertical tubes. Bubble behavior and void fraction profile are obtained by the image processing technique. Bubble movement is highly restrained by these vertical tubes, so that the bubbles rise up along the tube. The bubble diameter is well correlated by the modified Mori and Wen's correlation taking into account the pitch of the tube arrangement. The bubble rise velocity and void fraction are well correlated by applying the drift‐flux model. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 727–739, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10127     

Origin of electron mobility enhancement in (1 1 1)-oriented InGaAs channel metal-insulator-semiconductor field-effect-transistors

Electrical and physical characteristics of the Al₂O₃/InGaAs interfaces with (1 1 1)A and (1 0 0) orientations were investigated in an attempt to understand the origin of electron mobility enhancement in the (1 1 1)A-channel metal-insulator-semiconductor field-effect-transistor. The (1 1 1)A interface has less As atoms of high oxidation states as probed by X-ray photoelectron spectroscopy. The electrical measurements showed that energy distribution of the interface traps for the (1 1 1)A interface is shifted toward the conduction band as compared to that for the (1 0 0) interface. Laterally-compressed cross-section transmission electron microscopy images showed that the characteristic lengths of the interface roughness are different between the (1 1 1)A and (1 0 0) interfaces. The contributions of the Coulomb and roughness scattering mechanisms are discussed based on the experimental results.