Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research     

Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods

Formations of graded distribution of SiC ceramic particles within the hollow cylindrical shaped Al/SiC functionally graded materials (FGMs) fabricated by centrifugal solid-particle method (CSPM) and centrifugal mixed-powder method (CMPM) under huge centrifugal force are experimentally and theoretically investigated. The movement of SiC ceramic particles in viscous liquid under centrifugal force is explained based on Stoke's law. The effect of compositional gradient of particles on viscosity is taken into account. Also, the effect of temperature distribution on viscosity and density are considered. A computer code to simulate the formation of compositional gradient in the Al/SiC FGMs fabricated by CSPM and CMPM is developed. From the results, it is found that the volume fraction of SiC ceramic particles can be graded from the inner to the outer surface of hollow cylindrical shaped Al/SiC FGMs by CSPM. Meanwhile by CMPM, the SiC ceramic particles can be dispersed on the outer surface of hollow cylindrical shaped Al/SiC FGMs. The graded distribution in Al/SiC FGMs under huge centrifugal force is found to be significantly affected by the mold temperature but less affected by the temperature of molten Al and casting atmosphere.     

Mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions at 25.0°

The mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions were determined at 25.0° for dilute to saturated concentrations, together with the activities of water. In the dilute solutions of scandium halides, the activity coefficients were obtained from electromotive force measurements on galvanic cells, and the osmotic coefficients of all four solutions above 0.1 mol kg⁻¹ were determined from the isopiestic measurements. Least-squares equations were fitted to these coefficients, which were then used to calculate the mean molal activity coefficients and water activities. The relationships between these results and the corresponding activity data for other rare earth salts, and to the cation hydration and ionic interactions, are discussed. The results on scandium perchlorate solutions suggested that the inner-sphere hydration number of tervalent scandium ion may be seven.     

Pervaporation separation of water/ethanol mixtures through polysaccharide membranes. II. The permselectivity of chitosan membrane

The separation of water/alcohol mixtures through chitosan membrane was investigated. The degree of the deacetylation of chitosan did not affect the selectivity of the membrane in the separation of the water/ethanol mixture. The selectivity of the chitosan membrane was affected by the specific salts such as CoSO₄, ZnSO₄, and MnSO₄ and it increased when the salts were present in the feed mixture or the membrane was pretreated with the salt solution. This behavior would be explained by the contraction of the “holes” produced by the thermal motion of polymer chains and this contraction would be correlated with the conformation change of chitosan molecule due to the formation of complexes with metal ions.     

Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply

A novel temperature measuring system named LATSIS was proposed to realize a robust and accurate prediction of the thermal deformation of machining centers, even under external disturbances such as cutting fluid supply. LATSIS enables a drastic increase in the number of sensors employed for measuring the temperature of the machine tool. Thus, the entire temperature distribution can be obtained by interpolating the measured temperature 3-dimensionally without calculating the heat conduction. A set of experiments was conducted in which the LATSIS was employed to predict the TCP error. A total of 284 sensors were placed on the machining center, and the TCP error was predicted based on the measured temperature for the situation with/without the cutting fluid supply. The results of the prediction showed good agreement with the measured TCP error even during the initial transient temperature change as well as in the cooling phase after the machine halt. The TCP error with the cutting fluid supply is accurately predicted. LATSIS was proven to be a robust and accurate method for predicting the thermal deformation of machine tools, and is a promising technology for future manufacturing systems.     

The effect of electro-degradation processing on microstructure of polyaniline/single-wall carbon nanotube composite films

Mesostructured polyaniline/single-wall carbon nanotube (PAni/SWCNT) composite film has been prepared through electrochemical polymerization/degradation processing. The microstructures of the films are observed before and after electro-degradation. Initial twisty SWCNT bundles are broken down and linked by the polymerization of PAni. Both crystalline and disordered PAni regions coexist in the PAni/SWCNT composite nanowires. The disordered regions are gradually dissolved while the crystalline regions are basically preserved after electro-degradation. The formation mechanism of the composite with special construction has been proposed. In addition, cyclic voltammetry measurements demonstrate that the electroactive performance of PAni/SWCNT composite is enhanced after electro-degradation. It is found that the specific capacitance of electro-degraded composite reaches up to 848.7 F/g, more than twice over the untreated film, which is ascribed to its profitable charge accessible interface and increased available crystalline PAni regions.     

Chemical and Chromatic Bases for Preferential Visiting By the Cabbage Butterfly, Pieris rapae, to Rape Flowers

Scent and coloration of corolla were examined as floral attributes responsible for preferential visiting by the cabbage butterfly, Pieris rapae, to rape flower, Brassica rapa. Floral volatile components that release the flower-visiting behavior of the butterfly were identified by chemical analyses, electroantennography (EAG), and two behavioral bioassays: proboscis extension reflex (PER) in response to odor and attraction to artificial flowers. GC and GC-MS analyses of the headspace volatiles from the flowers revealed the presence of six aromatic compounds, benzaldehyde, phenylacetaldehyde, benzyl alcohol, 2-phenylethanol, phenylacetonitrile, and indole in decreasing order of quantity. Of these, phenylacetaldehyde elicited the highest response in the PER assay. While benzyl alcohol, 2-phenylethanol, benzaldehyde, and phenylacetonitrile evoked moderate responses, the PER-eliciting activity of indole was very weak. In two-choice behavioral bioassays, artificial flowers scented with any one of these PER-active compounds attracted significantly more butterflies than control (unscented) flowers, whereas those treated with indole were almost inactive. The EAG activities of the six chemicals were not high and were about the same at a low dose (1 g), but phenylacetaldehyde elicited a much stronger response from both sexes at higher doses (10 and 100 g). An overall profile of EAG responses at a dose of 100 g was analogous to that of PER performance, suggesting that floral volatiles may be involved in close-range location or recognition of flowers rather than long-range attraction. By spectroscopic and UV-photographic examinations of rape flower, the central part of the corolla was found to absorb UV rays in marked contrast to the other parts, which reflected near-UV rays (_max = 350 nm). This indicates that the flower is endowed with a conspicuous nectar guide that is probably an important visual stimulus for attracting foraging adults of P. rapae. Consequently, the present findings strongly suggest that this elaborate pollination strategy of rape flower, characterized by its good combination of olfactory and visual attractiveness, accounts for preferential visiting by the cabbage butterfly to the flower.     

Application of nuclear energy for environmentally friendly hydrogen generation

It is universally admitted that hydrogen is one of the best energy media and its demand will increase greatly in the near future. However, little hydrogen exists naturally, so that how to generate hydrogen without bringing forth much CO₂${}_2$ will be very important research subject. Hydrogen generation from water using nuclear energy is one of the solutions for this problem. Especially, the high temperature gas cooled reactor (HTGR) has a possibility to generate hydrogen economically compared with other types of nuclear reactors. As for long-lived radioactive waste to be generated by nuclear reactors, it is expected to significantly reduce its burden to the human environment by applying transmutation technologies. This report describes the feature of the hydrogen generation with HTGR and the development of the accelerator-driven subcritical system to reduce radioactive waste ongoing at JAEA.     

Fast agglomerative hierarchical clustering algorithm using Locality-Sensitive Hashing

The single linkage method is a fundamental agglomerative hierarchical clustering algorithm. This algorithm regards each point as a single cluster initially. In the agglomeration step, it connects a pair of clusters such that the distance between the nearest members is the shortest. This step is repeated until only one cluster remains. The single linkage method can efficiently detect clusters in arbitrary shapes. However, a drawback of this method is a large time complexity of O(n ²), where n represents the number of data points. This time complexity makes this method infeasible for large data. This paper proposes a fast approximation algorithm for the single linkage method. Our algorithm reduces the time complexity to O(nB) by rapidly finding the near clusters to be connected by Locality-Sensitive Hashing, a fast algorithm for the approximate nearest neighbor search. Here, B represents the maximum number of points going into a single hash entry and it practically diminishes to a small constant as compared to n for sufficiently large hash tables. Experimentally, we show that (1) the proposed algorithm obtains clustering results similar to those obtained by the single linkage method and (2) it runs faster for large data than the single linkage method. Hisashi Koga received the M.S. and Ph.D. degree in information science in 1995 and 2002, respectively, from the University of Tokyo. From 1995 to 2003, he worked as a researcher at Fujitsu Laboratories Ltd. Since 2003, he has been a faculty member at the University of Electro-Communications, Tokyo (Japan). Currently, he is an associate professor at the Graduate School of Information Systems, University of Electro-Communications. His research interest includes various kinds of algorithms such as clustering algorithms, on-line algorithms, and algorithms in network communications. Tetsuo Ishibashi received the M.E. degree in information systems design from the Graduate School of Information Systems at the University of Electro-Communications in 2004. Presently, he is a system engineer at Fujitsu Broad Solution & Consulting Inc. Toshinori Watanabe received the B.E. degree in aeronautical engineering in 1971 and the D.E. degree in 1985, both from the University of Tokyo. In 1971, he worked at Hitachi as a researcher in the field of information systems design. His experience includes demand forecasting, inventory and production management, VLSI design automation, knowledge-based nonlinear optimizer, and a case-based evolutionary learning system nicknamed TAMPOPO. He also engaged in FGCS (Fifth Generation Computer System) project of Japan and developed a new hierarchical message-passing parallel cooperative VLSI layout problem solver that ran on PIM (Parallel Inference Machine) in 1991. Since 1992, he has been a professor at the Graduate School of Information Systems, University of Electro-Communications, Tokyo, Japan. His areas of interest include media analysis, learning intelligence, and the semantics of information systems. He is a member of the IEEE.