Optimizing dock configuration and staffing in decentralized receiving

In manufacturing facilities, shipping and receiving traditionally have been concentrated in one or two areas of the building. The widespread introduction of just-in-time shipping policies in US manufacturing companies during the past 15 years, as well as the common use of decentralized receiving in the Japanese automobile industry, has motivated the consideration (and occasionally the adoption) of dock configurations to support decentralized receiving (also known as perimeter receiving). By providing multiple access points along the perimeter of the building, decentralized receiving generally reduces the time and cost associated with moving purchased parts to the locations within the facility where they are used, but also results in increased cost of construction, maintenance, and operation for docks and associated truck access/egress, as well as additional interior floorspace requirements. We develop an optimization-based procedure to determine which of several possible dock areas to construct, how many doors or gates each should have, how many unloading and internal material handling staff should be assigned to each group, and which inbound materials each group should handle. We consider the amortized cost of constructing and equipping the docks, the amortized cost of material handling equipment to support the unloaders and material handlers, the cost of operating the material handling equipment, and labor costs for both unloading and internal material handling.     

The Effects of Conventional Stabilizers and Phenol Compounds Used as Antioxidants on the Stabilization of Nitrocellulose

The thermal behavior of nitrocellulose (NC) containing diphenylamine (DPA), 2‐nitrodiphenylamine (2‐NO₂‐DPA), N‐nitrosodiphenylamine (N‐NO‐DPA), ethyl centralite (EC), akardite II (AKII), 1,1,3‐tri‐(2‐methyl‐4‐hydroxy‐5‐tert‐butyl‐phenyl)‐butane (BP_less), 3‐(3,5‐di‐tert‐butyl‐4‐hydroxy‐phenyl)‐propionic acid octadecyl ester (BP_hin), and 3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionic acid 2‐(9‐{2‐[3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionyloxy]‐1,1‐dimethyl‐ethyl}‐2,4,8,10‐tetraoxa‐spiro [5.5] undec‐3‐yl)‐2‐methyl‐propyl ester (BP_semi) was observed during isothermal storage at 393 K using a C80 microcalorimeter. The results indicate that each stabilizer decreased NC's maximum heat release rate and increased the induction period of heat release. We also observed that the maximum heat release rate and the induction period were dependent on the amount of stabilizer. DPA decreased the maximum heat release rate to the greatest extent, with the other stabilizers having similar effects on the decrease of maximum heat release rate. AKII prolonged the induction period of heat release most. The order of prolongation of the induction period was AKII>2‐NO₂‐DPA≈DPA>N‐NO‐DPA≈EC>BP_less≈BP_semi≈BP_hin.     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.     

Roles of the JAK-STAT system in signal transduction via cytokine receptors

JAK-STAT signaling pathways are known to play an essential role in the specific activation of interferon-inducible genes. Many cytokines interacting with the cytokine receptor superfamily also appear to activate these pathways. Recent evidence indicates that JAKs play an essential role(s) in cytokine receptor signaling, including both specific pathways linked to STATs and general pathways regulating cell growth and functions.     

Influence of refraction on the visual field defects in normal tension glaucoma and primary open angle glaucoma eyes

The prevalence of normal tension glaucoma (NTG) or primary open angle glaucoma (POAG) is higher in myopic populations and the prevalence of myopia and NTG is relatively high in the Japanese. To evaluate the influence of myopic refractive error on the central visual field defect in NTG eyes, the data obtained from NTG eyes with the Humphrey Visual Field Analyser were analysed in comparison with those from POAG eyes. One hundred and twenty NTG eyes and one hundred and ninety-seven POAG eyes were included. All of them had clear ocular media, but no myopic degeneration in the fundus. Multiple linear regression analysis was performed with a dependent variable of the deviation of the measured threshold value from normal reference value (total deviation, STATPAC) and independent variables of refractive error and mean deviation (STATPAC). Myopic power was found to be positively correlated with the depression in the lower papillo-macular area in both NTG and POAG eyes, and it was negatively correlated with the depression in an upper arcuate area extending just nasal to the fixation only in NTG eyes.     

Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors

We report on our prototype experiment that uses a 4-m detuned resonant sideband extraction interferometer with suspended mirrors, which has almost the same configuration as the next-generation, gravitational-wave detectors. We have developed a new control scheme and have succeeded in the operation of such an interferometer with suspended mirrors for the first time ever as far as we know. We believe that this is the first such instrument that can see the radiation pressure signal enhancement, which can improve the sensitivity of next-generation gravitational-wave detectors.     

Design and construction of a two-degree-of-freedom linear encoder for nanometric measurement of stage position and straightness

This paper presents a two-degree-of-freedom (two-DOF) linear encoder which can measure the position along the moving axis (X-axis) and the straightness along the axis vertical to the moving axis (Z-axis) of a precision linear stage simultaneously. The two-DOF linear encoder is composed of a reflective-type scale grating and an optical sensor head. A reference grating, which is identical to the scale grating except the scale length, is employed in the optical sensor head. Positive and negative first-order diffracted beams from the two gratings are superposed with each other in the optical sensor head to generate interference signals. The optical configuration is arranged in such a way that the direction of displacement in each axis can also be detected. A prototype two-DOF linear encoder is designed and constructed. The size of the optical sensor head is about 50 mm (X) × 50 mm (Y) × 30 mm (Z) and the pitch of the grating is 1.6 μm. It has been confirmed that the prototype two-DOF linear encoder has sub-nanometer resolutions in both the X- and Z-axes.     

Fabrication of micro-gelatin fiber utilizing coacervation method

Biotechnology has drastically been advanced by the development of iPS and ES cells, which are representative forms induced pluripotent stem cells. In the micro/nano bio field, the development of cells and Taylor-made medicine for a potential treatment of incurable diseases has been a center of attention. The melting point of gelatin is between 25 and 33 °C, and the sol–gel transition occurs in low temperature. This makes the deformation of this useful biomaterial easy. The examples of gelatin fiber applications are suture threads, blood vessel prosthesis, cell-growth-based materials, filter materials, and many others. Because the cell size differs depending on the species and applications, it is essential to fabricate gelatin fibers of different diameters. In this paper, we have developed a fabrication method for gelatin fibers the coacervation method. We fabricated narrow gelatin fibers having a diameter over 10 μm.     

Design and characteristics of InGaAs/InP composite-channel HFET's

A design for composite-channel structures consisting of an InGaAs channel and an InP subchannel for use as heterostructure field-effect transistors is presented for the first time. This novel channel structure takes advantage of both the high drift velocity and low impact ionization of InP at high electric fields as well as the high electron mobility of InGaAs at low electric fields. It is shown that the doping density of the InP subchannel is the key parameter to realize the advantages of the composite channel. A very high transconductance of 1.29 S/mm and a current gain cutoff frequency of 68.7 GHz are achieved with 0.6 and 0.7 /spl mu/m gates, respectively. The average velocity of electrons in the composite channel is 2.9/spl times/10/sup 7/ cm/s. The devices have no kink phenomena in their I-V characteristics possibly due to low impact ionization in the InP subchannel.<>